20 Most Recent Samsung SCX4824FN Mono All-in-One Laser Printer Questions & Answers


REPLACE FUSER UNIT OR LSU

Samsung... | Answered on May 08, 2014


dirty feed tires. clean with 99% alcohol.

Samsung... | Answered on Apr 22, 2014


Fixya doesn't have any drivers for any device, the only place to get the software is at the manufacturers support site, if they don't have the needed drivers to use Linux then it likely doesn't exist.

Samsung... | Answered on Feb 10, 2012


Hello,

Since it wasn't behaving like this previously, re-installing the software will solve the problem.

First, disconnect the printer from your computer. Uninstall the printer software from your control pane. After that restart the computer. Don't install the software or connect the printer yet.

Go to control panel, go to printer. You should find your printer's name/model there. Right click on the name and select delete. If you don't find the printer name, no problem. But make sure you delete all printer name that you see under Printers in control panel.

After that, restart the computer again, then you can now install the printer software afresh.

Install the software first, and after that plug in the printer. The software should direct you on the right time to plug the printer into the computer.

I hope you understand the above....

Good luck.

Samsung... | Answered on Apr 01, 2011


your computer needs to be cleaned up cc cleaner.

Samsung... | Answered on Feb 11, 2011


Have you tried Scanning? If scanning either doesn't work, then it's possible that the scanning unit (scanner lamp) is bad. Or is there any specific error shown when trying to Copy? It would be great if you can clarify. Thanks.

Samsung... | Answered on Feb 04, 2011


open the feeder cover you will see 2 rubber rollers,
if found dusty then just clean both roller with wet cloth.

Samsung... | Answered on May 18, 2010


its very easy to reset via firmware and also have reset modual install main board.



www.chipresetters.com
email: pateltraders@gmail.com

Jayendra Patel - +919825523201
msn:howtorefill@hotmail.com

Samsung... | Answered on Apr 14, 2010


Yes. When removing a jam, it is never wise to "aggressively" remove the paper, as it can break switches, gears, etc. maybe any switches or gears had damanged, need replacement of that parts.

Samsung... | Answered on Feb 25, 2010

Not finding what you are looking for?
Samsung SCX4824FN Mono All-in-One Laser Printer Logo

29 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

HEMANT GROVER

Level 2 Expert

171 Answers

Victorman
Victorman

Level 3 Expert

846 Answers

jasbo
jasbo

Level 3 Expert

2239 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

SCX Samsung

  • SCX Samsung

Most Popular Question

encounter paper jam whenever try copy or

  • Office Equipment & Supplies
Loading...