20 Most Recent Samsung SCX-4828FN All-In-One Laser Printer Questions & Answers


The best is if you deinstalate your samsung drivers from your computer, if the deinstallation is done you need to reboot your computer so All the program info are deleted, the installate the driver iser from the original samsung CD or from the samsung web site to your computer, you need to download the printer and the scanner driver and the DR. Printer from the samsung download site if you do not have the CD!

Samsung... | Answered on Aug 18, 2019


replace toner chip , reset not available

Samsung... | Answered on Feb 04, 2019


if you are talking BOUT THE EXIT IT IS IN THE UPPER LEFT BEHIND THE FUSER COVER IF YOU ARE LOOKING FROM THE BACK.

Samsung... | Answered on Jul 26, 2018


Dear
Its related to fusser assy. and smps. Mostly the thermostat of the fusser assy. fails. replacing the thermostat can over come the error. some times heating lamp fails very rare. Also Smps could not supply the voltage to the heater lamp.

Samsung... | Answered on May 10, 2018


Check the device drivers. You can go to the list and locate the printer setup area. Do an update of the drivers and see f that fixes the problem.

Samsung... | Answered on Feb 19, 2018


please disconect the printer for 5 minutes from the e-socet then conect it and try, if it still not work deinstallate the drivers and reboot the computer then installate the driver's from the samsung download site to your download folder first so they are availebl later again then installate the printer driver and the scanner driver and Dr. Printer an reboot the system again now check it should work proper now.

Samsung... | Answered on Nov 13, 2017


If the msg is " system error ". You have check fuser and LVPS

Samsung... | Answered on Feb 22, 2016


Presume that the paper sensor stopped working. If after reset it still "reuses" to recognize it has paper, you should take your printer to a repair service.


If you have some doubts about my answer, continue your quesry

Samsung... | Answered on Nov 05, 2015


Servicing or replace paper pikup parts: pikup roller , separation pads, solenoid etc

Samsung... | Answered on Aug 13, 2015


U have wrogly upgrade d the firmware.of the main board.Try with a fresh copy of original Samsung firmware.
Elase replace main board.

Samsung... | Answered on Aug 13, 2015


this problem is fuser relatated check fuser thermostat. faulty Thermostat replace it resolve problem

Samsung... | Answered on Feb 06, 2015


check the lsu unit whether it is working properly or not situated just above the toner cartridge

Samsung... | Answered on Jan 13, 2015


I would get on the internet with the PC you want to install the printer on and go to here: Web Install Agent
Make sure the printer is connected and turned on, the installer will identify the printer and install software and driver automatically.

Samsung... | Answered on Dec 17, 2014


enter tech mode by menu#1934 then data setup then clear memory then ok

Samsung... | Answered on Sep 19, 2014


PLEASE REPLACE PRINTER LSU OR HIGH VOLTAGE POWER SUPPLY

Samsung... | Answered on May 08, 2014

Not finding what you are looking for?
Samsung SCX-4828FN All-In-One Laser Printer Logo

163 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Lawrence Singapore

Level 1 Expert

70 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

SCX Samsung

  • SCX Samsung

Most Popular Question

error u1 2330 turn off

  • Office Equipment & Supplies
Loading...