20 Most Recent Kwikset Brz Sgl Cyl Deadbolt Questions & Answers

sometimes the kwikset web site has templates that you can download

Kwikset Brz Sgl... | Answered on Jun 17, 2011

Remove the deadbolt cover by removing the 2 screws. This will get you inside the deadbolt. Try using a screwdriver to pull it back. You may in the end have to break the unit in order to get it out and replace it. I have the same thing happen with a deadbolt. I ended up having to destroy the unit to get it out. You are going to replace it anyway so do whatever it takes to get it to unlock so you can then remove it from the door and install a new one. You do not want a deadbolt that will not unlock.

Kwikset Brz Sgl... | Answered on Jan 10, 2010

easy one this ,get a battery drill ,HSS drill bit and just drill the barrel out takes about a minute ,then when you get to the end of the lock ,do not go any further just pull the lock barrel out and put a screwdriver in and turn the slot at the bottom and the door will open .Do it often here when tourists loose the key on the beach or have bag snatched or pick pocketed and the spare key is in the UK .

Kwikset Brz Sgl... | Answered on Jan 02, 2010

Did you cut the bar to the correct lenght?(the flat or square one that connects to the thumb latch or other cylinder?) Too long and you'll bind the lock.Good Luck

Kwikset Brz Sgl... | Answered on Sep 15, 2009

It is not removable, it a knob.

Kwikset Brz Sgl... | Answered on Sep 14, 2009

A really, really, REALLY sharp chisel can be used to pierce the steel door skin enough to form the mortise you need for the bolt plate. Do not use a wood chisel unless you never ever intend to use it on wood again or have the means to completely renew the cutting edge. Cutting the opening for a plate in a metal door jamb is another issue since it is probably too thick to yield to a chisel. If the jamb is 1/8 to 1/4 inch thick you can just drill a hole in it to accept the extended bolt. it will be just as strong as a plate (maybe stronger.)

Kwikset Brz Sgl... | Answered on Jul 29, 2009

on the deadbolt yo should be able to turn it over, but on the door knobs and handle sets, you are stuck with it

Kwikset Brz Sgl... | Answered on Jul 11, 2009

tighten the two screws on the inside of the door phillips screwdriver

Kwikset Brz Sgl... | Answered on Jul 08, 2009

Tighten all screws on lock to a firm tightness. DO NOT OVER TIGHTEN as to bend the lock casing! Snug only. Use powered graphite to inject into lock and add to key working it back and forth into the lock.

Kwikset Brz Sgl... | Answered on Jul 08, 2009

They are advertised as 50 foot range, but the accuracy starts falling off past about 35 feet

Measuring Tools... | Answered 3 days ago

A hookah is an instrument used to smoke shisha. Shisha is a type of flavored tobacco! Read more on Shisha Heart

Measuring Tools... | Answered on Oct 10, 2019

can the battery be replaced. If so, how?
open the cover on the back of the device. this is done by squeezing the cover of the battery sector slightly. then remove the old batteries and replace the new ones (I assume you have the AAA) and put the new ones in keeping with the polarity for the device to work properly and then close the battery compartment cover in reverse order

Measuring Tools... | Answered on Sep 29, 2019

Not finding what you are looking for?
Kwikset Brz Sgl Cyl Deadbolt Logo

15 questions posted

Ask a Question

Usually answered in minutes!

Top Kwikset Measuring Tools & Sensors Experts

Vuk B

Level 3 Expert

717 Answers

Brad Brown

Level 3 Expert

18108 Answers

Tom Chichester

Level 3 Expert

54158 Answers

Are you a Kwikset Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kwikset Measuring Tools & Sensors

  • Kwikset Measuring Tools & Sensors

Most Popular Question

installing deadbolt in steel door need

  • Measuring Tools & Sensors