Stanley Utility Knife - Answered Questions & Fixed issues


In terms of functionality and features, Stanley FMHT10288 Retractable Knife is quite satisfying. The knife is considered as one of the best kitchen knives. The price remains in the lower range. So, as a budget friendly option, Stanley FMHT10288 Retractable Knife can be quite a fine choice for you indeed.

stanley-10-778l-fatmax-retractable-knife-vqugf4lgsewrsyjnp2d3onew-5-0.jpg

Stanley Utility... | Answered on Jun 06, 2018 | 643 views


You do not have to remove any screws. Extend the blade outward using the thumb slide on top of the knife. There is a small black pushbutton on the opposite side from the lock button. Depress the button on the side and using the other hand, grab the blade with your thumb and forefinger to pull the blade out. It may require a little wiggling. Now the new blade can be slide in and locked into place. The black pushbutton controls the locking mechanism that keeps the blade from pulling out.

Stanley Utility... | Answered on Jan 14, 2013 | 3,464 views


Hmmmmm.... that sounds really confusing.

Better yet... just watch this video! http://www.youtube.com/watch?v=B8Q1p-8jkyE

It's actually pretty easy! :)

Stanley Utility... | Answered on Feb 09, 2018 | 7,751 views


at the handel end it will pull apartthen slide the whats left of the old blade and put new won in its place just do it slowly so you dont forget how it goes

Stanley Utility... | Answered on Jul 31, 2012 | 1,492 views


Some models has 2 screws on the knife case.unscrew them and you can access to the blade.

Stanley Utility... | Answered on Jul 31, 2012 | 1,867 views


HI!Kindly pull the button on the end of the knife and then after you remove that you can now put the blade of your knife.

Stanley Utility... | Answered on Aug 21, 2011 | 759 views


This is the closest thing I can find. Click here.
Otherwise, write Stanley support and they'll answer you here.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Stanley Utility... | Answered on Jul 07, 2011 | 858 views


there is a little black button on the end where the blade comes out. With the blade in the out position,push in the button and pull out the blade. With button pushed insert new blade or turn the old one around to use the other end.let go of the button and you are ready to go.

Stanley Utility... | Answered on Jun 26, 2011 | 804 views


Hi.

See here the Stanley knife disassembly. If you have a 99E there may be an additional plastic part that is not shown in the diagram. The plastic tab is located at the back of the blade.

Stanley Utility... | Answered on Jun 04, 2011 | 1,837 views


the blade section pivots to swivel when doing that it allows you access to the blade storage area that holds up to 7 blades, if the extra blades arent in place perfectly the handle won't close properly, if your problem is with the blades themselves, make sure that the slot in the blade is aligned with the holder perfectly

Stanley Utility... | Answered on May 14, 2011 | 633 views


This knife is ****. To load... you have to push the slide all the way forward. Make sure the switch is set to unlock. PINCH THE BLADE WITH YOUR FINGERS AND WIGGLE IT INTO PLACE. Then you have to use every ounce of thumb power to relock the switch.

Once you are done, the blade will still come out in 9.9 / 10 times you cut something.

Stanley Utility... | Answered on May 28, 2011 | 1,989 views


At the back end of the knive (the curved end) press the black piece through the yellow rounded part and the yellow front and the black back will part, now slide the yellow part back to reviel the blade folder. Fit new blade then refit the yellow part on top of the black part and slide the yellow part foward to lock it back in.

Stanley Utility... | Answered on Jul 31, 2010 | 980 views


I was able to find the answer on another site. It is really simple when someone tells it to you. You push the blade all the way out then you can push the yellow button and it comes out.

Stanley Utility... | Answered on Sep 07, 2009 | 1,001 views


Slide the blade holder all the way out, press on the tab as shown in picture. Pull on blade with other hand. Blade slides right out.
10_12_2016_7_08_24_am.jpg

Stanley Cutter... | Answered on Jun 07, 2017 | 1,929 views


Use a third blade, preferable mounted to your utility handle, to part them. Handle only from the back side and give the utility knife a slight twist as soon as it is between the points of the new blades.

Cutter Tools | Answered on Aug 15, 2019 | 325 views


Manual bolt cutters usually have symmetrical V-edge cutting blades.
knife-edge-styles3-uipjjaq4o2dp2d2150uxp5lp-5-5.png
With the sharpening angle in the range of 20-30 degrees.

28bc-7-4-_tbi-_head_on_centre_cut_replacement_jaws-uipjjaq4o2dp2d2150uxp5lp-5-9.jpg
For comparison, the sharpening angle of the kitchen knife is less than 10 degrees.

With such a pretty blunt edge is impossible to cut your finger. But this is the best option for cutting thick metal rods or cables. Like this:
bolt-cutter_3-uipjjaq4o2dp2d2150uxp5lp-5-14.png
If it is interesting to read more information about bolt cutters, I recommend this review -
https://toolslaboratory.com/best-bolt-cutter-buyers-guide-2019

Cutter Tools | Answered on Jul 10, 2019 | 887 views


Take a look at this image of a basic pipecutter;
http://www.mccusainc.com/Tools/images/PVC-Pipe-Cutters-1.jpg

Cutter Tools | Answered on Jun 15, 2019 | 1,013 views


https://www.youtube.com/watch?v=26pv9PAyO1I Helpful video to show how it works. Once you get the hang of it becomes easier.

Cutter Tools | Answered on May 31, 2019 | 55 views


Have you tried www.ereplacementparts.com

Cutter Tools | Answered on Apr 24, 2019 | 777 views

Not finding what you are looking for?
Stanley  Utility Knife  Logo

49 questions posted

Ask a Question

Usually answered in minutes!

Top Stanley Cutter Tools Experts

JOHN LAPIER

Level 3 Expert

2591 Answers

Joseph Hoffmann

Level 3 Expert

1755 Answers

Joe Garcia
Joe Garcia

Level 2 Expert

206 Answers

Are you a Stanley Cutter Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...