20 Most Recent Breville WC15XL Compact Wine Cooler Questions & Answers


HOW TO USE

First you place the Wine Cooler on a flat, dry surface, making sure that the timer is in the "off" position.

Remove the chill cells from the freezer and place around the inside of the cooler.

Thirdly, place the bottle inside the cooler and then pour cold tap water inside, until it just covers the top of the chill cells.

You can then plug the unit in, or if it has batteries you don't need to.

Finally, you set the control dial to the desired time. The following are recommendations for different types of beverages:

Sparkling Wine, Champagne and Dessert Wine.....9 minutes

Dry Wines, Sauvignon Blanc, Riesling.....6 minutes

Chardonnay, Rose'....5 minutes

Light Red Wines, Pinot Noir....3.8 minutes

Full Bodied Reds, Shiraz, Grenache, Cab Sauvignon, Merlot....3 minutes


If you choose to chill a beverage without the timer, you just turn the control to the left and when you are done you turn it to the off position.

In addition to wine, the cooler can also chill beer and soft drinks. The only limitation is that the bottle diameter can be no more than 3.75 inches.

Should you wish to chill two or more consecutive bottles, the cells will remain cold enough for you to to do so.

While not in use, the cooler can also be used on the table with ice to keep your beverages cold (much like a regular ice bucket).

The power cord is removable, which makes for an easy clean-up.

The unit comes with a manufacturer's One-Year Limited Warranty.

Breville WC15XL... | Answered on Apr 10, 2009


Please check if this is the model you have and maybe this can help. good luck. d066f00e-d454-4535-8840-331d35e2a9ef.pdf

Breville... | Answered on May 09, 2017


I'm not exactly sure what you mean by a washing machine hookup. Most washing machines hookups have two hose bibbs (faucets that a hose can screw on to), one for hot and one for cold. Refrigerators have a 1/4 inch flexible line, either copper or plastic. So, I'm assuming that you mean you have a hose bibb for the water supply and you want to connect it to the quarter inch line on the fridge.

The best approach would be to remove the hose bibb and connect to the line that is feeding it. Assuming that it is a 1/2" rigid copper pipe you can get adaptors at a plumbing store or at a store like Home Depot to step it down to 1/4", then connect to the fridge line with a compression fitting. If your hose bibb is threaded, you would start at the wall with the same size threaded connection and see what your local store has available in the line of adaptors. Best would be if you can find a single adaptor that will go from 1/2" to 1/4". You may need one to go from 1/2" to 3/8" and another to go from 3/8" to 1/4".

A second approach that would be a jury rig type of thing (say if you can't get the hose bibb off) would be to get a hose end connector to attach to the faucet and step it down with clamps and tubing. Use adaptors that fit inside tubing of successively smaller sizes (2 steps will probably do it) ending with 1/4" plastic that you can attach to your fridge with a compression union. (they make 3/8" to 1/4" compression unions, so you would only need to end with a 3/8 inch tube making the connection with the adaptor/union.

Modify this according to what you have in the house (say if you have 5/8" water lines instead of 1/2").

If I'm not understanding your problem correctly, please clarify.

Breville... | Answered on Aug 03, 2009


MOST HAVE A PAN UNDER THEM TO CATCH IT THEN THE FAN EVAPORATES IT BUT YOU HAVE TO DETERMINE WHERE IT COMES FROM . WE CAN NOT AS WE ARE NOT THERE POSSIBLY WHEN IT AUTO DEFROSTS .

Refrigerators | Answered 3 hours ago


Ohm out compressor leads to check for a short. If it checks out good you may need to put a hard start kit on it which is like a capacitor with extra boost to help start the compressor. Sometimes this is needed when a compressor is getting older and worn. Also make sure you have the proper voltage going to your contactor. I personally think that you may have a bad compressor. Hopefully it ohm's out good. I hope this helps.

Refrigerators | Answered 4 hours ago


you thermostat is not working any more
you would have to chance it

Refrigerators | Answered 8 hours ago


Evaporator (cooling coil) fan motor is not operating or a component failure in the defrost system which comprises the defrost timer, defrost heater, or the defrost safety termination thermostat.

Refrigerators | Answered 17 hours ago


Hi, if there are no screws in the underside of the bottom edge of the control panel, you should see two little lots in the underside of the bottom edge. Just use a flat blade screw driver and insert it into the slot. Twist the screws driver and the control panel should release.
I hope this helps you. please let me know if I can assist you further.

Vic

Refrigerators | Answered 20 hours ago


Most likely doesn’t have one. Check owners manual

Refrigerators | Answered Yesterday


Quite possibly. where was it located when you took the board out?

Refrigerators | Answered Yesterday

Not finding what you are looking for?
Breville WC15XL Compact Wine Cooler Logo

11 questions posted

Ask a Question

Usually answered in minutes!

Top Breville Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4655 Answers

Marvin
Marvin

Level 3 Expert

83850 Answers

Brad Brown

Level 3 Expert

17816 Answers

Are you a Breville Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Breville Refrigerators

  • Breville Refrigerators

Most Popular Question

use breville wc15xl wine chiller

  • Refrigerators
Loading...