Top 20 Breville WC15XL Compact Wine Cooler Questions & Answers


HOW TO USE

First you place the Wine Cooler on a flat, dry surface, making sure that the timer is in the "off" position.

Remove the chill cells from the freezer and place around the inside of the cooler.

Thirdly, place the bottle inside the cooler and then pour cold tap water inside, until it just covers the top of the chill cells.

You can then plug the unit in, or if it has batteries you don't need to.

Finally, you set the control dial to the desired time. The following are recommendations for different types of beverages:

Sparkling Wine, Champagne and Dessert Wine.....9 minutes

Dry Wines, Sauvignon Blanc, Riesling.....6 minutes

Chardonnay, Rose'....5 minutes

Light Red Wines, Pinot Noir....3.8 minutes

Full Bodied Reds, Shiraz, Grenache, Cab Sauvignon, Merlot....3 minutes


If you choose to chill a beverage without the timer, you just turn the control to the left and when you are done you turn it to the off position.

In addition to wine, the cooler can also chill beer and soft drinks. The only limitation is that the bottle diameter can be no more than 3.75 inches.

Should you wish to chill two or more consecutive bottles, the cells will remain cold enough for you to to do so.

While not in use, the cooler can also be used on the table with ice to keep your beverages cold (much like a regular ice bucket).

The power cord is removable, which makes for an easy clean-up.

The unit comes with a manufacturer's One-Year Limited Warranty.

Breville WC15XL... | 2,087 views | 14 helpful votes


Please check if this is the model you have and maybe this can help. good luck. d066f00e-d454-4535-8840-331d35e2a9ef.pdf

Breville... | 99 views | 0 helpful votes


I'm not exactly sure what you mean by a washing machine hookup. Most washing machines hookups have two hose bibbs (faucets that a hose can screw on to), one for hot and one for cold. Refrigerators have a 1/4 inch flexible line, either copper or plastic. So, I'm assuming that you mean you have a hose bibb for the water supply and you want to connect it to the quarter inch line on the fridge.

The best approach would be to remove the hose bibb and connect to the line that is feeding it. Assuming that it is a 1/2" rigid copper pipe you can get adaptors at a plumbing store or at a store like Home Depot to step it down to 1/4", then connect to the fridge line with a compression fitting. If your hose bibb is threaded, you would start at the wall with the same size threaded connection and see what your local store has available in the line of adaptors. Best would be if you can find a single adaptor that will go from 1/2" to 1/4". You may need one to go from 1/2" to 3/8" and another to go from 3/8" to 1/4".

A second approach that would be a jury rig type of thing (say if you can't get the hose bibb off) would be to get a hose end connector to attach to the faucet and step it down with clamps and tubing. Use adaptors that fit inside tubing of successively smaller sizes (2 steps will probably do it) ending with 1/4" plastic that you can attach to your fridge with a compression union. (they make 3/8" to 1/4" compression unions, so you would only need to end with a 3/8 inch tube making the connection with the adaptor/union.

Modify this according to what you have in the house (say if you have 5/8" water lines instead of 1/2").

If I'm not understanding your problem correctly, please clarify.

Breville... | 74 views | 1 helpful votes


A sensor tube ( looks like a wire ) in front, at air inlet, is the temperature sensor and many times this sensor is poorly cared for and even broken off by people. It's my guess, this sensor may be the problem for it controls compressor cycling on and off.

Refrigerators | 412 views | 1 helpful votes


id use silicone spray it wont smell so long...

Refrigerators | 80 views | 1 helpful votes


will need to sand down to metal no rust then primer then repaint --or spray or wire on a rust away product most auto or home stores carry it

Refrigerators | 395 views | 1 helpful votes


The unit wont work with just ice bottles. It needs water to run down the pads to create the evaporative effect. The tank should have a drain somewhere. Look down the bottom of the machine for a plug or tap that can be removed / unscrewed to drain the water out.

Refrigerators | 240 views | 1 helpful votes


Frostless freezers will go into a defrost cycle periodically and the frost that accumulates in the freezer section melts and runs into a pan under the refrigerator section, through a drain hose. If this hose clogs with crud (common) the melt water can't drain and leaks into refrigerator section (or it was designed this way so as to prevent refreezing.) As the drain is clogged, thd water builds up until it overflows to floor level.

You need to locate the drain in bottom of the refrigerator section (usually near the back where its hidden from view) and clear it out. (Use care as its usually only a vinly hose and can be punctured or slipped off its connection).

Refrigerators | 407 views | 1 helpful votes


Request the diagrams directly from Igloo.

Refrigerators | 254 views | 1 helpful votes


no power -no relay -no thermostat --no freon --burnt up compressor

Refrigerators | 45 views | 0 helpful votes


P1 is usually the code for a temperature probe error - the refrigeration should now operate on a time cycle until the temp probe is replaced

Refrigerators | 252 views | 1 helpful votes


Need a little more info, but it should have a removable container that hold the ice. That comes out. If it is too jammed up with ice to move it, you will have to carefully chip away at some of it, or let it thaw. Once you are able, take the container out and empty it completely dry it out. If that doesn't do it, there is a problem with the mechanism.

Refrigerators | 330 views | 2 helpful votes


short -seized--thermal safety fail electrical circuit problem

Refrigerators | 312 views | 1 helpful votes


Fixya does not sell refrigerator compressors.

Refrigerators | 24 views | 0 helpful votes


Call out an engineer. You can't diagnose and fix yourself. Just make sure the condenser coils are clean of dust first.

* refrigerator
* freezer

Refrigerators | 34 views | 0 helpful votes


AP5 doesn't appear to be a GE Model number. The Google search query for this information is

make model specs

and you will get information like this

GEĀ® 17.9 Cu. Ft. Stainless Top-Freezer Refrigerator ' GTS18SBSSS ...


https://products.geappliances.com/appliance/gea-specs/GTS18SBSSS

Product Dimensions (WxHxD) (in.) 29 1/2 in x 66 5/8 in x 32 1/8 in. Energy Guide - Click for this product's energy information. About this ProductAbout this Missing: AP5

https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&ei=EfwtXfiMEdHOtQaclLc4&q=GEA+AP5+refrigerator+specs

Or you could ask the tenant to measure the existing one, or it is a good excuse to visit the property and inspect.

Refrigerators | 41 views | 0 helpful votes

Not finding what you are looking for?
Breville WC15XL Compact Wine Cooler Logo

11 questions posted

Ask a Question

Usually answered in minutes!

Top Breville Refrigerators Experts

Marvin
Marvin

Level 3 Expert

85160 Answers

Brad Brown

Level 3 Expert

18072 Answers

Gil Shultz

Level 3 Expert

3388 Answers

Are you a Breville Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Breville Refrigerators

  • Breville Refrigerators

Most Popular Question

use breville wc15xl wine chiller

  • Refrigerators
Loading...