20 Most Recent DISH Network ES190482 Remote 40.0 ES190482 - Page 10 Questions & Answers


Hi there Carol, my name is Kimberly and I form part of the Social Media Department with DISH. Please replace the batteries on the remote, and try readressing the remote to the receiver. Follow this link for detailed information on how to address your remote to the receiver http://www.mydish.com/support/remote-control?WT.svl=contentarea If you have additional questions please feel free to reach me at: kimberly.escobar@dish.com

Kimberly Escobar
Social Media Representative
DISH L.L.C

DISH Network... | Answered on Mar 27, 2014


Hi there, my name is Kimberly and I form part of the Social Media Department with DISH. It is a pleasure to help you today. Please reset the DISH receiver by unplugging it from the electrical outlet for 10 seconds. After 10 seconds,plug it back in, allow the receiver to power back on by itself and once you have programming on the screen, check if the issue persists. If so, disconnect the cable connecting from the DISH receiver to the TV,from the TV and check if you can connect it to a different port on the Tv. If issue persists please email me at:kimberly.escobar@dish.com for further assistance.

Kimberly Escobar
Social Media Representative
DISH L.L.C

DISH Network... | Answered on Mar 27, 2014


Hi there Dillon, my name is Kimberly and I form part of the Social Media Department with DISH. It is my pleasure to assist you today. Unplugging the receiver from the wall outlet for 10 seconds should resolve this problem. If the issue persists feel free to reach me at: kimberly.escobar@dish.com or to contact us directly at: 1800-333-3474

Kimberly Escobar
Social Media Representative
DISH L.L.C

DISH Network... | Answered on Mar 18, 2014


Hi there, my name is Kimberly and I form part of the Social Media Department with DISH. It is my pleasure to assist you today. Please make sure that the cable connecting from the receiver to the TV is tight (if necessary, disconnect it and plug it back into the receiver and tv) If this does not resolve the issue please send me your account information at: kimberly.escobar@dish.com for further assistance.

Kimberly Escobar
Social Media Representative
DISH L.L.C

DISH Network... | Answered on Mar 16, 2014


Hi Lara, my name is Kimberly and I form part of the Social Media Department with DISH. I regret the inconvenience you are experiencing with our receiver. Please unplug the box from the electrical outlet for 10 seconds, plug it back in and allow it to power back on by itself. After the receiver powers back on, it will acquire signal and download the guide, the issue should be resolved. If the issue persists then we would need to look into replacing the receiver. You can reach me at: kimberly.escobar@dish.com for further assistance.

Kimberly Escobar
Social Media Representative
DISH L.L.C

DISH Network... | Answered on Mar 16, 2014


Hi Justine, my name is Kimberly and I form part of the Social Media Department with DISH. I regret the inconvenience you are experiencing with our receiver. Please unplug the box from the electrical outlet for 10 seconds, plug it back in and allow it to power back on by itself. After the receiver powers back on, it will acquire signal and download the guide, the issue should be resolved. If the issue persists then we would need to look into replacing the receiver. You can reach me at: kimberly.escobar@dish.com for further assistance.

Kimberly Escobar
Social Media Representative
DISH L.L.C

DISH Network... | Answered on Mar 16, 2014


My first suspicion rests with the quality of the HDMI cable? Expensive isn't ALWAYS good, although "cheapies" can be the worst offenders. If you have a friend that'd volunteer a temporary swap, you could determine if this is your problem. Sony rarely exhibits this type of problem.

DISH Network... | Answered on Mar 16, 2014


Not sure about that on satBox and tv, but you might be missing some settings about how the device reacts to that tv in specific.

DISH Network... | Answered on Mar 11, 2014


Hi there Dillon Snoga, my name is Kimberly and I form part of the Social Media Department with DISH. It is my pleasure to help you today. Please reset the receiver by unplugging it from the wall outlet for 10 seconds, plug it back in, allow it to power back on by itself, allow it to acquire signal and download the guide. After this, you should have picture back on the screen. If issue persists feel free to reach me at: kimberly.escobar@dish.com

Kimberly Escobar
Social Media Representative
DISH L.L.C

DISH Network... | Answered on Mar 06, 2014


Hi there Stacey, my name is Kimberly and I form part of the Social Media Department with DISH. We do not promise that our remote will control all the functions of you TV. The codes used to program your DISH remote to the TV may be limited to some functions. You can try addressing your remote to the TV using different codes. I have listed the steps below to assist with programming the remote to your TV. If you have any other questions, let me know at Kimberly.escobar@dish.com!

You can lookup the different codes here: http://www.mydish.com/support/apps/remotecodes.aspx?WT.svl=leftnav

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.

Kimberly Escobar
Social Media Representative
DISH L.L.C

DISH Network... | Answered on Mar 02, 2014


Contact the service provider to Dish. This is not the fault to your TV. They should make it clear. Gopakumar Gopalan Google

DISH Network... | Answered on Feb 24, 2014


I have listed the steps below to assist with programming the remote to your TV. If you have any other questions, let me know at Kimberly.escobar@dish.com!

Follow this link to obtain the code you need to address your remote to the tv: http://www.mydish.com/support/apps/remotecodes.aspx?WT.svl=leftnav

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.

Kimberly.Escobar
Social Media Representative
DISH L.L.C

DISH Network... | Answered on Feb 13, 2014


Hi there Patsy! My name is Kimberly and I form part of the Social Media Department with DISH. It is my pleasure to assist you today!
I have listed the steps below to assist with programming the remote to your TV. If you have any other questions, let me know at Kimberly.escobar@dish.com

Please follow this link to obtain the code you will need to address your remote to the Tv: http://www.mydish.com/support/apps/remotecodes.aspx?WT.svl=leftnav

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.

Kimberly Escobar
Social Media Representative
DISH L.L.C

DISH Network... | Answered on Feb 13, 2014


Hi there Janice, If you have a Hopper system and have deleted all of your recordings, you may recuperate them by pressing 'Menu' on your remote, selecting 'DVR' then 'My recordings' and 'Deleted Recordings' Once you are in the 'Deleted Recordings Screen' you have the option to select 'Restore' (this option will allow you to restore all Deleted Recordings) Unfortunately no other receiver has the capacity to restore deleted recordings.

Kimberly Escobar
Social Media Representative
DISH L.L.C

DISH Network... | Answered on Feb 12, 2014


Hi there Janice! My name is Kimberly and I form part of the Social Media Department with DISH. It is my pleasure to assist you. The procedure to Enable or Disable the Inactivity Standby Mode on your receiver will depend on the model of receiver you have. If you have a Hopper, you will need to press 'Menu' on your remote, select 'Settings', then 'Diagnostics, and at last 'Updates'. Once you are in the updates screen you will be able to Disable it Enable the hours. Be sure to select 'Save' once you have selected an option.
If you currently have a VIP 722 dvr, you will need to press 'Menu' > 'Preferences' and then 'Updates' Be sure to selecet the hours of Inactivity before the receiver goes into Stanby and select 'Save'. If you have any other model of receiver please email me at: kimberly.escobar@dish.com for further assistance.

Kimberly Escobar
Social Media Representative
DISH L.L.C

DISH Network... | Answered on Feb 12, 2014


Try to set it up with an other code to your device, and see the effect. With a universal remote control, we can't expect all the functions marked on it will work as it is. Just try to set it up with an other code to your device, and see which code give you the maximum functionality; and select it as. That's all we can do.
0018 0020 0041 0049 0050 0065 0101 0102 0107 0131 0139
0152 0161 0166 0177 0181 0195 0198 0209 0215 0314 0320
0379 0391 0408 0421 0634 0660 0667
These are the general setup codes to Sanyo brand TVs.
Try these codes. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier.
http://electrohelponline.blogspot.com/

DISH Network... | Answered on Feb 09, 2014

Not finding what you are looking for?
DISH Network ES190482 Remote 40.0 ES190482 Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

DISH Network Televison & Video

  • DISH Network Televison & Video

Most Popular Question

help dish remote 40 0 isnt fully

  • Televison & Video
Loading...