20 Most Recent DISH Network ES190482 Remote 40.0 ES190482 - Page 5 Questions & Answers


To whom it may concern,

Assuming that you mean to "hook up" your tv to your dish services, you mean that you'd like your remote to be capable of controlling your tv.. then here are the instructions. Otherwise provide more information.

1.) Point the remote towards the desired device you'd like to control.

2.) Press and hold the "tv" button at the top right hand side of your remote until all the top buttons begin flashing red.

3.) Press the small red power button at the top of the remote one time.

4.) Slowly and repeatedly press the down key on the directional pad until your device powers off.

5.) Once the device powers down, at the bottom right hand side of the remote underneath the keypad.. press the # key.
The "tv" button will flash red three times, and then your remote is linked to the box.

dish guy
como-puedo-programar-un-control-remoto-odifhgr5ijpooifpd2tmdw21-2-0.jpg

If you need further help, I’m available over the phone at https://www.6ya.com/expert/brian_142c5ec89a7a3fda

DISH Network... | Answered on Jul 23, 2016


. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts.
http://electronicshelponline.blogspot.com/
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name to your device, in the "Search box at the top right of the display window" to see the set-up codes to your device, with different brand remote controls.

DISH Network... | Answered on Jul 23, 2016


If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts.
http://electronicshelponline.blogspot.com/
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name to your device, in the "Search box at the top right of the display window" to see the set-up codes to your device, with different brand remote controls.
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.

DISH Network... | Answered on Jul 23, 2016


That's the way CC usually works. You can verify this by turning mute on and off.

DISH Network... | Answered on Jul 23, 2016


Is the remote capable of controlling other items check the handbook for the dish system for TV control set up if possible

DISH Network... | Answered on Jul 23, 2016


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

DISH Network... | Answered on Jul 23, 2016


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

DISH Network... | Answered on Jul 23, 2016


You can easily buy a replacement remote from amazon for dish tv. $20 or under. You can try best buy as well. I know they carry directv remotes.

DISH Network... | Answered on Jul 23, 2016


On you remote control look for INPUT or SOURCE, cycle though until you get it back. Very often it will be listed as the name of the cable or satellite source.

DISH Network... | Answered on Jul 23, 2016


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.

DISH Network... | Answered on Jun 23, 2016


0271,0280,0217. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts.
http://electronicshelponline.blogspot.com/
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name to your device, in the "Search box at the top right of the display window" to see the set-up codes to your device, with different brand remote controls.
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.

DISH Network... | Answered on Mar 05, 2016


do not think that can be done thru DISH

DISH Network... | Answered on Mar 03, 2016


If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts.
http://electronicshelponline.blogspot.com/
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name to your device, in the "Search box at the top right of the display window" to see the set-up codes to your device, with different brand remote controls.
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.

DISH Network... | Answered on Feb 23, 2016


This conversation with Dish Support fixed my problem...
Genne Rose (ID: N1D): Hi, my name is Genne Rose (ID: N1D). How may I help you? Daniel Jacobs: My remote won't pair with my Dish DVR Genne Rose (ID: N1D): I apologize for the inconvenience. It will be my pleasure to help you with your issue today. Genne Rose (ID: N1D): Thank you very much for letting me know your concern. We appreciate your time and effort in contacting us regarding this matter. Rest assured, I will help you all throughout this chat session. Genne Rose (ID: N1D): Thank you for providing your account information and PIN when launching the chat. I have your account loaded and have verified your information. Genne Rose (ID: N1D): The following steps will walk you through the process of addressing the remote to your Hopper.

• Please press and release the SYSTEM INFO button on the front panel of the receiver.
• Then press and release the SAT button. The SAT mode button should then light up with a series of beeps.
• Please verify the remote is now working by pressing the CANCEL button. Daniel Jacobs: yes -- the SAT light lights up Genne Rose (ID: N1D): Thank you. Genne Rose (ID: N1D): Great. Genne Rose (ID: N1D): Have you done that already? Are you finish? Daniel Jacobs: yes Genne Rose (ID: N1D): Thank you. Genne Rose (ID: N1D): Is it working now? Daniel Jacobs: no Genne Rose (ID: N1D): To check, using dish remote, please press and release SAT button, then GUIDE button. Daniel Jacobs: i had already tried that with no success Daniel Jacobs: that doesn't do anything Genne Rose (ID: N1D): I apologize for the inconvenience, Daniel. Genne Rose (ID: N1D): Can you try to reset your receiver by pressing the RESET button on the front panel of the Hopper? Daniel Jacobs: I've done that once, but I can try it again if you want Genne Rose (ID: N1D): Yes, please. Thank you. Daniel Jacobs: oKAY, It's resetting now Genne Rose (ID: N1D): Thank you. Genne Rose (ID: N1D): Right after the reset, please do that again, Daniel. Daniel Jacobs: Do what again? Genne Rose (ID: N1D): The instruction I have provided above on programming your dish remote to the receiver. Daniel Jacobs: you mean System Info followed by SAT button? Genne Rose (ID: N1D): Yes, Daniel. Daniel Jacobs: It's still "Acquiring Signal" .... Genne Rose (ID: N1D): can you try SAT then RECORD button instead? Daniel Jacobs: Should I wait until it's done "Acquiring Signal" ? Genne Rose (ID: N1D): Yes, Daniel. Genne Rose (ID: N1D): We have to finish first the reset before we can program the dish remote again. Daniel Jacobs: It's still "Acquiring Signal" ... Genne Rose (ID: N1D): Let's wait for it to be completed first. Daniel Jacobs: Okay it's back Genne Rose (ID: N1D): Great Daniel Jacobs: you want me to do SAT then RECORD? Genne Rose (ID: N1D): Yes, Daniel. Daniel Jacobs: I guess you mean SYS INFO and then SAT and RECORD? Genne Rose (ID: N1D): Yes, that is correct./ Daniel Jacobs: nothing happens. Just the SAT light coming on is all Genne Rose (ID: N1D): Alright. Thank you. Genne Rose (ID: N1D): Now, can you try to press and release SAT button then GUIDE button. Genne Rose (ID: N1D): Are you able to pull up GUIDE Menu ? Genne Rose (ID: N1D): Or press the Menu button? Daniel Jacobs: Nothing happens -- it's not paired Daniel Jacobs: The sys info screen says "No Remotes Connected" Genne Rose (ID: N1D): I'm sorry about that Genne Rose (ID: N1D): Alright. Genne Rose (ID: N1D): Can you do this? Genne Rose (ID: N1D): Let's deprogram your dish remote.1. Press and hold the SAT mode button until all mode buttons light up. 2. The SAT mode button will begin blinking. 3. Press and hold the RECALL and 0 (System Wizard) buttons at the same time for 3 seconds. 4. Press the SEARCH button. 5. Press the VOL + button. 6. Press the STOP button, then wait 5 seconds. 7. If de-linking is successful, 3 descending tones will be heard from the remote. Daniel Jacobs: I heard the descending tones Genne Rose (ID: N1D): Great. Daniel Jacobs: ok Genne Rose (ID: N1D): Now, can you check if the remote is now working on the receiver? Genne Rose (ID: N1D): try to press and release SAT button then GUIDE button or Menu button. Daniel Jacobs: It looks like it might be working Genne Rose (ID: N1D): Perfect! Genne Rose (ID: N1D): You did a great job, Daniel. Genne Rose (ID: N1D): Is it totally working now? Daniel Jacobs: Yeah, I think so -- I got the Guide on the screen Genne Rose (ID: N1D): Awesome! Daniel Jacobs: thanks Genne Rose (ID: N1D): It is perfectly working now. Genne Rose (ID: N1D): You're most welcome. Genne Rose (ID: N1D): Yapeeeeeeeeeeeeeeeeee !! Daniel Jacobs: right! Genne Rose (ID: N1D): Thank you so much for your patience and cooperation, Daniel. Genne Rose (ID: N1D): For future reference, you can also checkhttp://www.mydish.com/support to access quick and easy troubleshooting steps that will save you time in the future. Genne Rose (ID: N1D): I would like to tell you about DISH Perks. It is an exclusive program that provides DISH customers a lot of extras at no additional cost. You can visit www.mydish.com/perks to see a lineup of the latest freebies. Many perks are available for your benefit. Genne Rose (ID: N1D): Have we addressed all of your concerns today, Daniel? Daniel Jacobs: yes thx Genne Rose (ID: N1D): You're welcome. Genne Rose (ID: N1D): Is there anything else I can help you with today? Daniel Jacobs: no thanks Genne Rose (ID: N1D): Thank you for choosing Chat features and allowing DISH to help and for being big part of DISH. It's our pleasure to assist you today. Always keep in mind that DISH appreciates and value you. Have a great day! Take care and regards to you and your family! :) Happy Holidays! Genne Rose (ID: N1D) has disconnected.

DISH Network... | Answered on Dec 24, 2015


Codes are stored in the remote. If you can't find a code, the Dish remote may not have it.

DISH Network... | Answered on Dec 01, 2015


0139,0192. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts.
http://electronicshelponline.blogspot.com/
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name to your device, in the "Search box at the top right of the display window" to see the set-up codes to your device, with different brand remote controls.

DISH Network... | Answered on Oct 24, 2015

Not finding what you are looking for?
DISH Network ES190482 Remote 40.0 ES190482 Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

DISH Network Televison & Video

  • DISH Network Televison & Video

Most Popular Question

help dish remote 40 0 isnt fully

  • Televison & Video
Loading...