20 Most Recent Schlage BE365-CAM BE365CAM619 Satin Nickel Electronic Security Camelot Elec Questions & Answers


"How can I program my electronic keypad lock when the instructions with the Programming Code have been lost?"
The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.

Complete installation & programming instructions can be found here:

http://consumer.schlage.com/Project%20Documents/P515-858.pdf

Notice that the above is a .pdf filetype. That means that you need to have Adobe Reader or similar installed on your computer to view it. So if you are unable to view the file, download (for free) and install Adobe Reader first. You can get it here:

http://get.adobe.com/reader/

Videos for installing and programming can be found on this page:

http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Scroll down and find them under the heading Electronic Security--Keypad deadbolt 365

Good luck--and please provide feedback if this helps!

Schlage... | Answered on Nov 10, 2011


The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.

Complete installation & programming instructions can be found here:

http://consumer.schlage.com/Project%20Documents/P515-858.pdf

Notice that the above is a .pdf filetype. That means that you need to have Adobe Reader or similar installed on your computer to view it. So if you are unable to view the file, download (for free) and install Adobe Reader first. You can get it here:

http://get.adobe.com/reader/

Videos for installing and programming can be found on this page:

http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Scroll down and find them under the heading Electronic Security--Keypad deadbolt 365

Good luck--and please provide feedback if this helps!

Schlage... | Answered on Nov 08, 2011


BE-365 installation & programming PDF: http://consumer.schlage.com/Project%20Documents/P515-858.pdf

How can I program my electronic keypad lock when the instructions with the programming code have been lost?
The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.
This number is the programming code referenced in the information for changing the entry code.

Complete installation & programming instructions can be found here:

http://consumer.schlage.com/Project%20Documents/P515-858.pdf

Notice that the above is a .pdf filetype. That means that you need to have Adobe Reader or similar installed on your computer to view it. So if you are unable to view the file, download (for free) and install Adobe Reader first. You can get it here:

http://get.adobe.com/reader/

Videos for installing and programming can be found on this page:

http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Scroll down and find them under the heading Electronic Security--Keypad deadbolt 365

Good luck--and please provide feedback if this helps!

Schlage... | Answered on Nov 08, 2011


The lock has what is called the "turnlock" feature. When enabled, you have to only push the Schlage button, then manually turn the dial. When disabled, you have to enter the user code, then turn the dial.

To enable/disable this feature, enter your Programming Code--press the Schlage button--Press 7.

Each time you do this, you toggle between enabled and disabled.

Complete installation & programming instructions can be found here:

http://consumer.schlage.com/Project%20Documents/P515-858.pdf

Notice that the above is a .pdf filetype. That means that you need to have Adobe Reader or similar installed on your computer to view it. So if you are unable to view the file, download (for free) and install Adobe Reader first. You can get it here:

http://get.adobe.com/reader/

Videos for installing and programming can be found on this page:

http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Scroll down and find them under the heading Electronic Security... 365

Good luck--and please provide feedback if this helps!

Schlage... | Answered on Nov 08, 2011


The lock has what is called the "turnlock" feature. When enabled, you have to only push the Schlage button, then manually turn the "dial". When disabled, you have to enter the user code, then turn the dial. So either way, you still have to turn the dial.

To enable/disable this feature, enter your Programming Code --press Schlage button--press 7

Each time you do this, you toggle between enabled and disabled.


This link will take you to the page for programming information:

http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Then scroll down to this heading on that page:

Electronic Security-Keypad Deadbolt 365

There's a wealth of info under that heading. You will be able to see a PDF file of the original print instructions, as well as a video of how to install the lock. This installation video (second item down) will be useful to allow you to disassemble it and view the sticker. This is also a great time to change the 9-volt battery! Batteries should be replace about every three years.
The seventh item under that same header is a video which walks you through how to reprogram the keypad to your new code, using that programming code that you found on the backside of the keypad.
A note about the PDF files: If you cannot view a given file, you need to first install Adobe reader. You can get the free download from here:

http://get.adobe.com/reader/

Good luck--and please provide feedback if this helps!

Schlage... | Answered on Nov 08, 2011


This link will take you to the page that you need to get started:

http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Then scroll down to this heading on that page:

Electronic Security-Keypad Deadbolt 365

There's a wealth of info under that heading. You will be able to see a PDF file of the original print instructions, as well as a video of how to install the lock. This installation video (second item down) will be useful to allow you to disassemble it and view the sticker. This is also a great time to change the 9-volt battery! Batteries should be replace about every three years.
The seventh item under that same header is a video which walks you through how to reprogram the keypad to your new code, using that programming code that you found on the backside of the keypad.
A note about the PDF files: If you cannot view a given file, you need to first install Adobe reader. You can get the free download from here:

http://get.adobe.com/reader/

If you continue to have problems, contact their Customer Support.

Good luck--and please provide feedback if this helps!

Schlage... | Answered on Nov 08, 2011


This link will take you to the page that you need to get started:

http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Then scroll down to this heading on that page:

Electronic Security-Keypad Deadbolt 365

There's a wealth of info under that heading. You will be able to see a PDF file of the original print instructions, as well as a video of how to install the lock. This installation video (second item down) will be useful to allow you to disassemble it and view the sticker. This is also a great time to change the 9-volt battery! Batteries should be replace about every three years.
The seventh item under that same header is a video which walks you through how to reprogram the keypad to your new code, using that programming code that you found on the backside of the keypad.
A note about the PDF files: If you cannot view a given file, you need to first install Adobe reader. You can get the free download from here:

http://get.adobe.com/reader/

Good luck--and please provide feedback if this helps!

Schlage... | Answered on Nov 08, 2011


How can I program my electronic keypad lock when the instructions with the programming code have been lost?
The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.
This number is the programming code referenced in the information for changing the entry code.

This link will take you to the page that you need to get started:

http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Then scroll down to this heading on that page:

Electronic Security-Keypad Deadbolt 365

There's a wealth of info under that heading. You will be able to see a PDF file of the original print instructions, as well as a video of how to install the lock. This installation video (second item down) will be useful to allow you to disassemble it and view the sticker. This is also a great time to change the 9-volt battery! Batteries should be replace about every three years.
The seventh item under that same header is a video which walks you through how to reprogram the keypad to your new code, using that programming code that you found on the backside of the keypad.
A note about the PDF files: If you cannot view a given file, you need to first install Adobe reader. You can get the free download from here:

http://get.adobe.com/reader/

Good luck--and please provide feedback if this helps!

Schlage... | Answered on Nov 06, 2011


BE-365 installation & programming PDF: http://consumer.schlage.com/Project%20Documents/P515-858.pdf
A note about the PDF files: If you cannot view a given file, you need to first install Adobe reader. You can get the free download from here:

http://get.adobe.com/reader/

good luck.

Schlage... | Answered on Nov 06, 2011


First, change the battery. Complete installation instructions here:
http://consumer.schlage.com/Project%20Documents/P515-858.pdf

Schlage... | Answered on Nov 06, 2011


http://consumer.schlage.com/Project%20Documents/P515-858.pdf

Schlage... | Answered on Nov 06, 2011


How can I program my electronic keypad lock when the instructions with the programming code have been lost?The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.

This link will give you instructions for various models of Schlage locks:
http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx
There is a video on this page, showing how to change codes.

Good luck!

Schlage... | Answered on Mar 06, 2011


How can I program my electronic keypad lock when the instructions with the programming code have been lost?The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.

This link will give you instructions for various models of Schlage locks:
http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Good luck!

Schlage... | Answered on Mar 06, 2011


How can I program my electronic keypad lock when the instructions with the programming code have been lost?The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.

This link will give you instructions for various models of Schlage locks:
http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Good luck!

Schlage... | Answered on Mar 06, 2011


How can I program my electronic keypad lock when the instructions with the programming code have been lost?The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.

This link will give you instructions for various models of Schlage locks:
http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Good luck!

Schlage... | Answered on Mar 05, 2011


How can I program my electronic keypad lock when the instructions with the programming code have been lost?The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.

This link will give you instructions for various models of Schlage locks:
http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Good luck!

Schlage... | Answered on Mar 05, 2011


It sounds like its a defect in the mechinasm of the lock Did it ever work and before and how old is it I can tell you this SCHLAGE is a vary low grade look as compared to say a baldwin look set it cost 60% less and is mass produced So not knowing the age and knowing the quailty level i would say its not worth it to try to fix this If you have a warrenty thats still valid for it mabey but it will end up costing more then the thing is worth to repair if it can even be done sorry im just telling the truth good luck

Schlage... | Answered on Nov 24, 2010


I don't know if the deadbolt is the same as the BE-series lever-handle lock that I worked on, so this answer is about the lever-handle one:

I just had that same problem last week! The short answer is, "No, you can't replace the cylinder," but if you are willing to do some surgery on the lock and take it apart (take a picture just before you remove each piece!), you can put a tiny opening on the cam on the back of the cylinder so a 6-pin key can go all the way into the cylinder and then go through the back.

The cam comes off in a unique way: depress the tiny brass dot in it and then turn it about 1/4 turn (maybe a little more or less, I don't remember exactly) and it will come off. You can then rekey the cylinder to your key and, as I said, make that little hole in the cam. To make the hole, I used a Dremel rotary tool with a 1/16" diameter bit. To figure out exactly where to make the hole, I put some lipstick on the end of my key and pushed it all the way into the keyway before I took the cam off. (You could achieve the same thing by sharpening a straight piece of piano wire or spring steel wire, pushing it through to the back of the keyway and wiggling it a lot to make scratch marks.) Keep your hole as small as possible so you don't weaken the cam. Assemble everything back together and you can now use your 6-pin key.

I'm being a little flippant here. The mechanism inside that lock is pretty complicated. I'm a locksmith with over 40 years experience, and while it took me only a few minutes to make that hole and rekey the cylinder, it took me about an hour to figure out how all the pieces that connected to the motor fit back into the case so they would allow the outside handle to engage the lock when the motor activated, how the wires needed to be put back in around the edges and not bind against anything, and finally to get the cover back on.

Good luck!

Schlage Locks &... | Answered 2 days ago

Not finding what you are looking for?
Schlage BE365-CAM  BE365CAM619 Satin Nickel Electronic Security Camelot Elec Logo

22 questions posted

Ask a Question

Usually answered in minutes!

Top Schlage Locks & Locksmithing Experts

JOHN LAPIER

Level 3 Expert

2591 Answers

Mike

Level 3 Expert

4362 Answers

Cindy Wells

Level 3 Expert

6026 Answers

Are you a Schlage Lock and Locksmithing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Schlage Locks & Locksmithing

  • Schlage Locks & Locksmithing

Most Popular Question

need change security code asap but ive

  • Locks & Locksmithing
Loading...