20 Most Recent Hitachi P42A202 42 in. Plasma TV - Page 5 Questions & Answers


That is a good a guess as any.

Hitachi... | Answered on Dec 15, 2018


All URCs do not contain all possible codes.

Hitachi... | Answered on Dec 02, 2018


http://www.hitachi-america.us/products/consumer/tv/

Hitachi... | Answered on Nov 21, 2018


Hello this seems like main board issue with this TV and that a repair might be possible but may not be cheap.
Sites: National Organization Of Installation and Service Engineers Noiseuk or https://www.tvparts.co.uk/index.php?route=account/login

Hitachi... | Answered on Nov 08, 2018


Hello this could be software depends on model and serial number of this to be able to obtain it but is 50/50 chance on this being hardware instead. I can advise on obtaining this from 0345 604 0105 if purchased at Argos. If hardware then please use local repair if none found here are two https://www.tvparts.co.uk/index.php?route=account/login or National Organization Of Installation and Service Engineers Noiseuk

Hitachi... | Answered on Nov 08, 2018


According to the specifications, https://www.cnet.com/products/hitachi-l32a403/specs/ , the Hitachi L32A403 has a digital (ATSC) and an analog (NTSC) tuner. Check if the input/source is set to TV. The signal strength information will only be available if you are using the digital tuner. This TV has an Input button on the TV and on the original remote. (It's the second from the bottom on the side of the TV, between the power and menu buttons. On the remote, the Input button is above and to the right of the arrow/Select keys. The Menu button is on the left side of the remote in that same line.) Press the Input button and then use the arrow keys to highlight the desired input; press Select to go to the input. On the TV the Channel Up/Down buttons are the same as the Up/Down arrows on the remote in this menu. The Volume keys will work as Left/Right.

Make sure to set the Channel Source to Air before attempting to scan for channels and check the signal strength. The Channel sub-menu is at the bottom of the list on the On-Screen Menu, after you press that button. However, this menu is not available if the input isn't TV. See the manual here: https://www.searspartsdirect.com/partsdirect/user-manuals/l32a403-hitachi-parts-manual .

Since digital signals are either enough to be seen by the tuner or give no signal, make sure that you use the best antenna appropriate for the distance and frequencies being broadcast in your area. Point the antenna in the correct direction. See http://www.antennaweb.org or http://www.tvfool.com for information on the stations near you. Antennaweb gives a very conservative list even though it assumes an external antenna.

I hope this helps.

Cindy Wells

Hitachi... | Answered on Nov 06, 2018

Not finding what you are looking for?
Hitachi P42A202 42 in. Plasma TV Logo

Popular Tags

11 questions posted

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2337 Answers

The Knight
The Knight

Level 3 Expert

76115 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Hitachi Televison & Video

  • Hitachi Televison & Video

Most Popular Question

hitachi plasma 50 tv model p42a202 s

  • Televison & Video
Loading...