20 Most Recent Hitachi P42A202 42 in. Plasma TV - Page 6 Questions & Answers


According to the specifications, https://www.cnet.com/products/hitachi-l32a403/specs/ , the Hitachi L32A403 has a digital (ATSC) and an analog (NTSC) tuner. Check if the input/source is set to TV. The signal strength information will only be available if you are using the digital tuner. This TV has an Input button on the TV and on the original remote. (It's the second from the bottom on the side of the TV, between the power and menu buttons. On the remote, the Input button is above and to the right of the arrow/Select keys. The Menu button is on the left side of the remote in that same line.) Press the Input button and then use the arrow keys to highlight the desired input; press Select to go to the input. On the TV the Channel Up/Down buttons are the same as the Up/Down arrows on the remote in this menu. The Volume keys will work as Left/Right.

Make sure to set the Channel Source to Air before attempting to scan for channels and check the signal strength. The Channel sub-menu is at the bottom of the list on the On-Screen Menu, after you press that button. However, this menu is not available if the input isn't TV. See the manual here: https://www.searspartsdirect.com/partsdirect/user-manuals/l32a403-hitachi-parts-manual .

Since digital signals are either enough to be seen by the tuner or give no signal, make sure that you use the best antenna appropriate for the distance and frequencies being broadcast in your area. Point the antenna in the correct direction. See http://www.antennaweb.org or http://www.tvfool.com for information on the stations near you. Antennaweb gives a very conservative list even though it assumes an external antenna.

I hope this helps.

Cindy Wells

Hitachi... | Answered on Nov 06, 2018


as we do not know you or where you live we can not determine that for you check with any local tv retailer as to your needs

Hitachi... | Answered on Nov 05, 2018


Consult user manual.

Hitachi... | Answered on Nov 03, 2018


Universal remotes need to be coded in to whatever appliance you are wanting it to operate. Check the instructions on what codes to use for your Hitachi. Otherwise look on Ebay. There are hundreds of remotes at reasonable prices or check with Hitachi parts for a genuine remote.

Hitachi... | Answered on Oct 30, 2018


Have you got an led light on TV? if you do try another socket and control switches on the TV.

If no led light then try another wall socket and fuse in plug.

Hitachi LE55S606 Owner Manual

Hitachi... | Answered on Oct 16, 2018


Have you tried DVD lens cleaner, more than one DVD, Menu down scroll down to Setup scroll down to reset?

Hitachi L26D103 Operating Manual Quick Guide For Menu Operation

Hitachi... | Answered on Oct 16, 2018


To check for updates, navigate to Settings > System > System update, and then select Check now. The TV responds either
with a message saying that your TV is up to date, or with a message saying that an update is available.

To determine your current Roku TV software version, go to Settings > System > About, and then press OK or navigate to
the right.
Hitachi 55R7 Owner Manual

Hitachi... | Answered on Oct 16, 2018


You can change input using inputs button on remote or the TV button to bring it back to the correct live TV source. Here is your manual: Hitachi 51F59 Operating Manual

Hitachi... | Answered on Oct 16, 2018


hello

Four Digit Universal Remote Code for Hitachi are:-

0088 0059 0142 0060 0072 0004 0009 0091 0001 0012 0061 0137 0139 0141 0179 0227

Three Digit universal remote code for Hitachi are:-

001/ 004/ 009/ 013/ 059/ 061/ 079/ 088/ 091/ 137/ 139/ 140/ 141/ 142/ 143/ 144/ 145/ 146/ 179/ 210

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.

Hitachi... | Answered on Oct 15, 2018


Open internal fuse or power supply failure

Hitachi... | Answered on Oct 13, 2018


Go On Google and search your questions and Then get your answer easily. If you're thinking Factory effex coupon code factory effex Promo Codes Discount 2018 about purchasing a T-shirt so come on our site and collect the Best Discounted Deals on your Shopping.

Hitachi... | Answered on Oct 10, 2018


Can you please press the following:

1. Menu button
2. Type in "4,7,2,5" in on remote this should access engineer mode
3. Scroll down to "Diagnostics"
4. Press ok
5. Scroll down to "Factory Reset"

If not you will need to find service menu code for this TV model will help in order to find this.

Hitachi... | Answered on Oct 06, 2018


Order the service manual directly from Hitachi.

Hitachi... | Answered on Oct 04, 2018


Have you tried this another wall socket?
Can you try holding on control power button on the TV while plugging the TV in mains socket as well.

Hitachi... | Answered on Oct 02, 2018


The world with the arrow going through it on remote control for your internet portal on picture of remote below once on the portal. There will be some applications on the top right of screen one will say "Market" press ok on this application for any downloadable applications. If application is not listed these are subject to change and alternatives such as amazon fire stick or similar would work in its place.
https://duckduckgo.com/?q=hitachi+remote&t=ffab&iax=images&ia=images&iai=http%3A%2F%2Fwww.grrpicturehosting.co.uk%2FSixBit_2%2FJanuary2015%2F162722-01.jpg

Hitachi... | Answered on Oct 02, 2018


This TV does not have HDMI sockets located on the TV you would need a converter from RCA to HDMI which are quite expensive around £70 an example is below
https://www.amazon.com/HDMI-converter-composite-video-audio/dp/B074MCX7VX

Hitachi... | Answered on Oct 02, 2018

Not finding what you are looking for?
Hitachi P42A202 42 in. Plasma TV Logo

Popular Tags

11 questions posted

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2337 Answers

The Knight
The Knight

Level 3 Expert

76115 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Hitachi Televison & Video

  • Hitachi Televison & Video

Most Popular Question

hitachi plasma 50 tv model p42a202 s

  • Televison & Video
Loading...