20 Most Recent Motorola Talkabout T5320 (14 Channels) 2-Way Radio Questions & Answers


Reprogram your Radio

Motorola... | Answered on Jul 11, 2016


Could be a sign of a bad battery. Static is a good indicator of a rechargeable battery nearing end of life.

Motorola... | Answered on Feb 16, 2016


With the radio on press the MENU button. The current channel will begin to flash. Use the + or - button to change the channel while it is flashing. Press the PTT button to lock in your selection.

Here is a link to the user guide: http://www.giantintl.com/ContentManage/manuals/Moto/T5300_T5400_User_Manual_E.pdf

Motorola... | Answered on Aug 04, 2009


Hi PC Bedwell, check the battery charge, it may be needing to be replaced, likewise, control the charger
I hope you can solve the problem
Regards Franco Dosil

Hola PC Bedwell, comprueba la carga de las bater?as, puede estar necesitando ser reemplazadas, de igual manera, controla el cargador
Espero puedas resolver el problema
Saludos Franco Dosil

Motorola Radio... | Answered Yesterday


Check your Private Line (aka interference eliminator code, tone code, PL, quiet call). It sounds like you have one radio set with a PL setting and the other one is open squelch (no private line). All settings for frequency and PL code need to be the same between the two radios.

We don't have a manual for the T3, but I am attaching one for the T5, which may be similar. http://www.motorola.com/web/Business/Products/Two-Way%20Radios%20-%20Unlicensed/_Documents/TLKR-T%20series/Static%20Files/T5%20Manual%20EU.pdf

Best regards.

Motorola Radio... | Answered on Aug 31, 2019


The CLS has preprogrammed frequencies. The Bao can be user programmed. If both are Uhf, the Bao must match the CLS unless one of the CLS frequencies is already in use in the Bao. So, are you already using CLS and adding radios? You need the actual frequency and tone code. If you do not understand, contact a dealer like us, local is even better! Channel 1 is only an indicator, not a frequency. radiodude365@yahoo.com

Motorola Radio... | Answered on Jun 16, 2019


Turn off your CTCSS or DTS functions. You will have to go into the set up menu for this.

Motorola Radio... | Answered on Jun 04, 2019


Long press P3 and check key sign will be goes OFF, now your keypad is unlock.

Motorola Radio... | Answered on May 31, 2019


You must have the RSS (radio service software) software and the correct cable. There is no resetting without these.

Motorola Radio... | Answered on Apr 15, 2019


Check your battery connections and/or batteries. It sounds like the radio is trying to perform the “power on” sequence, but doesn’t have enough power to actually power on. Use fresh from the package or other “known good” batteries, and clean the battery contacts with rubbing alcohol and a clean paper towel. If there is corrosion or other oxidation on the contacts, you may need to use an emery board and then the alcohol wipe. Beyond that, the radio is not really “user serviceable”. Is there any chance the malfunctioning radio was exposed to water?

Motorola Radio... | Answered on Mar 02, 2019

Not finding what you are looking for?
Motorola Talkabout T5320 (14 Channels) 2-Way Radio Logo

Popular Tags

7 questions posted

Ask a Question

Usually answered in minutes!

Top Motorola Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1655 Answers

Anthony Ward
Anthony Ward

Level 2 Expert

396 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Motorola Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Motorola Radio Communications

  • Motorola Radio Communications

Most Popular Question

change channel t5320 2way

  • Radio Communications
Loading...