20 Most Recent Samsung CLX-3175FW Multifunction Laser Color Printer Questions & Answers


REPLACE FUSER OR THERMOSTAT ON FUSER

Samsung... | Answered on Aug 08, 2016


Have you turned the printer off then tiurn it back on. If you have a paper jam, after you remove the paper, you must restart it for it to clear.
Otherwise, if there is paper still in the printer, turn off the printer remove all 4 toner cartridges and the waste cartridge. Once you do that you may be able to see the paper. You may be able to take one more thing out to where you can see the paper better, I am not sure.
Kevin

Samsung... | Answered on Jul 03, 2016


Dear Andy
the genuine cart. can solve the problem. also you can replace the toner chip with a fresh chip. as this chip kept the toner use and paper counts etc. so try it.
thanks.

Samsung... | Answered on Mar 31, 2015


Dear
The developer clean blades must be cleaned. Also the ITB cleaning blade to be cleaned. If the waste toner drive shaft broken.

Thanks.

Samsung... | Answered on Mar 04, 2015


if you fill them your self, like i do, it will say "TONER EMPTY" then it will say STOP.
if you press the right arrow, it will say "CONTINUE" then press ok.
This way you should be able to print using the refilled cartiridges, but every time you open the fuser cover, or the printer gets turned on and off, it will ask you the same quiestion.
if you accidently press STOP, dont worry, just turn it off and turn it on again, and it will ask you it again.

Incase you need toenr powder, refill supermarket supply the powder, if you email them, they will give you a link to the requred toner powder.
it costs about £26 inc shipping uk, to refill the printer.

Hope this helps.

Jake

Samsung... | Answered on Jan 15, 2015


re install the printer drivers or
reset the printer by eject the power and data cable for a one minite

Samsung... | Answered on Nov 27, 2014


Reinstall software. You do not have to
uninstall the original software, re instalation will roll over it.
Brad

Samsung... | Answered on Nov 26, 2014


sensor failure #a3-3311

Samsung... | Answered on Oct 04, 2014


When you find out, please share the answer.

Samsung... | Answered on Jul 09, 2014


your printer papper seting is change the correct size of your papper

Samsung... | Answered on May 06, 2014


Try changing the left margin size in the page setup. Decrease the left margin size.

You could also try printing in Landscape instead of Portrait just to see if it captures the left margin.

Samsung... | Answered on Mar 21, 2014


First Take out the transfer belt out again and refix and put the connectors properly.
Next check the driver settings.
Check the toners are present and working by installing a samsung smart panel software.
then u print .
If the same thing exists. take assistance of service center. it may be HVPS problem.

Samsung... | Answered on Mar 05, 2014


replace it , its having some kind of hardware problems

Samsung... | Answered on Nov 11, 2013


I'm having the very same problem. Did you happen to find a solution?

Samsung... | Answered on Sep 17, 2013

Not finding what you are looking for?
Samsung CLX-3175FW Multifunction Laser Color Printer Logo

Popular Tags

118 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

jasbo
jasbo

Level 3 Expert

2239 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Samsung Office Equipment & Supplies

  • Samsung Office Equipment & Supplies

Most Popular Question

replaced new black toner into clx3175fw

  • Office Equipment & Supplies
Loading...