20 Most Recent Midland LXT310 2-Way Radio Questions & Answers


Check the batteries? Old, new, upside down?

Midland LXT310... | Answered on Oct 02, 2016


empty channel? no frequency on that channelposition?

Midland LXT310... | Answered on May 05, 2015


Are you on the same channels? Are you on a repeater setting? What are your squelch settings?Are your batteries fully charged? Power is needed on transmit, not so much on receive

Midland LXT310... | Answered on Feb 22, 2015


Typically you can expect the AA batteries to last about 18 hours using the 5-5-90 rule. (5% of the time your are transmitting, 5% receiving, and 90% standby) If you transmit/receive more than this the time the radio would go would be shorter.

Best regards.

Midland LXT310... | Answered on Jun 06, 2014


Here you can download the manual for your radios. http://www.midlandradio.com/Resource_/OwnerManual/53/LXT410.pdf Hope this helps.

Midland LXT310... | Answered on Mar 20, 2014


From the Midland.com site. Just click the link.
LXT480

Midland LXT310... | Answered on Nov 25, 2013


Scanning is interrupted when you key the other unit's mike. For example, if the non-scanning unit is set to channel 13 and keyed scanning will stop at channel 13 on the other unit to establish communication between the two.

Midland LXT310... | Answered on Nov 07, 2013


You have to remove the belt clip, then the battery cover. There is a locking tab at the top of the belt clip.

a701bd47-3485-4e4f-bddf-ea25e31601d6.png
To remove the belt clip, press the LOCK TAB down , then gently pull the belt clip up toward the top of the radio.

Then remove the battery cover, press near the seam and slide the cover down:
d1a4b2c3-3493-4e95-b89f-1919308134a0.png

Replace the batteries, observing polarity.
Slide the cover back on until it locks in place.
To install the belt clip, slide the clip down into the slot on the back
of the radio until the belt clip lock clicks.

Hope this helps! If you need more help, please ask!

Midland LXT310... | Answered on Oct 18, 2013


I had problems removing mine also. 1st remove the clip. With the back of the radio facing you push down firmly with your thumb and slide it off. At 1st I didn't think mine removed but after some extra force I was able.

Midland LXT310... | Answered on Oct 17, 2013


Hi,

Have you tried opening the battery compartment on the rear of the radio?.

Peter

Midland LXT310... | Answered on Mar 18, 2013


  • Hi, to turn the radio up or down just press the up or down arrow while in standby mode (listening) or while receiving. Let me know if you have any other questions.

  • Hope this helps.

Midland LXT310... | Answered on Nov 12, 2011

Not finding what you are looking for?
Midland LXT310 2-Way Radio Logo

42 questions posted

Ask a Question

Usually answered in minutes!

Top Midland Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1655 Answers

Gene Pitts

Level 2 Expert

159 Answers

Brad Brown

Level 3 Expert

18108 Answers

Are you a Midland Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Midland Radio Communications

  • Midland Radio Communications

Most Popular Question

oops misplaced manual

  • Radio Communications
Loading...