20 Most Recent GE 25 in. Nautilus GSC3400J Free-standing Dishwasher Questions & Answers


change you water inlet valve your water level is to low remove kick plate look to the left front thats where you.ll find the water valve remove the power plug from the water valve then take some pliars and remove the black hose by removing the clamp reverse prossess

GE 25 in.... | Answered on Jan 15, 2014


We just bought a used version of the GE Nautilus and we were able to get a generic "fits most portable dishwashers" adapter and it worked great. We went to Fred Meyer (which I believe is a Kroger company in the NW) and it was the only one they had. It only cost $3.99. The brand is Plumb Craft by Waxman and the model number is 76-127. Dishwasher Faucet Aerator. Hope this helps!

Good Luck!

GE 25 in.... | Answered on Dec 18, 2013


nothing it needs a switching kit or drain solenoid kit rather

GE 25 in.... | Answered on Feb 28, 2013


if the dishwasher has not been used for a few weeks, the water in the sump that goes into the pump will evaporate causing the pump to freeze up. usually you can turn the fins inside the motor to free it up. make sure the dishwasher is not on when you do this.

GE 25 in.... | Answered on Feb 16, 2013


Hello Wes. Begin by installing a new o ring. Take off the old one and take it to a hardware store to get the correct replacement. Also pick up a little tube of O ring lube.

GE 25 in.... | Answered on Jan 25, 2013


check water level is ok. check its heating. open door when in operation and check if spray arms are rotating. if not, take them out, run water into centre hole and check water comes out of jets. note the spray arms only rotate with water coming out of angled jets at end

GE 25 in.... | Answered on Oct 04, 2012


The water supply may be turned off

The water control valve may be malfunctioning

GE 25 in.... | Answered on Sep 08, 2012


GE has a kit available for the undercounter installation of this dishwasher, I recommend the purchase of this kit to simplify your install.

GE kit # WD35M34

Good Luck !

GE 25 in.... | Answered on Sep 21, 2011


Hi and welcome to FixYa, I am Kelly
This is usually caused by the plastic float in the bottom of the unit being stuck OR a failed float micro-switch.

The parts you need to look at are items 302, 305, 306, 307, 308 and 490 this link:
http://www.appliancepartspros.com/partsearch/model.aspx?model_id=5224401&diagram_id=26124425#d26124425

Check the stem from the BOTTOM. It should slide up and down freely. Listen for the microswitch to CLICK as you lift it up and down. No click = bad switch. If it is sticky you will have to remove the float and clean the whole assembly.

Concentrate your efforts in this area and I am sure you will resolve the issue.

Thanks for choosing FixYa,
Kelly

GE 25 in.... | Answered on Sep 11, 2011


Cloudy or gritty dishes are due to hard water deposits. Starting in summer 2010, many states have passed laws that prohibit phosphates in dishwasher detergent. The phosphates were good at removing hard water deposits. After the law changed, detergents don't work very well anymore. So I created a product that solves the problem. It's all-natural, contains no phosphate, and it works great! It's a powder. You add 1-2 tablespoons to each wash cycle and you use a lot less of your normal detergent. So your cost per wash does not increase. See my website at www.CitriClean.net

GE 25 in.... | Answered on May 07, 2011

Not finding what you are looking for?
GE 25 in. Nautilus GSC3400J Free-standing Dishwasher Logo

124 questions posted

Ask a Question

Usually answered in minutes!

Top GE Dishwashers Experts

Mike

Level 3 Expert

4357 Answers

Archie Ferrarini
Archie Ferrarini

Level 3 Expert

869 Answers

Vitally Alcher

Level 3 Expert

1645 Answers

Are you a GE Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

GE Dishwashers

  • GE Dishwashers

Most Popular Question

ge nautilus dishwasher not drain all

  • Dishwashers
Loading...