20 Most Recent Linksys WRT120N Router Questions & Answers


Hi,

I see that you are looking for the security Key settings, to be able to get your security key settings fir the Router you will need to get your Routers IP address.

Step 1. click the stat button on the lower left side of your Desktop screen, click all programs and look for Accessories, then click command promp this should show a black screen with a blinking cursor type in ipconfig then press enter this will show you information about your networks ip address, Look for Default gateway something like this 192.168.2.1 this varies on the router that you have.

Step 2. Enter the IP address on the address Bar of your browser then press enter this should show you the Routers settings page that is where you can see your routers settings for the security key.

to see your security key in windows you will need to check in device manager and click open Network and sharing center.

Upper right hand side you should see Manage wireless networks, click on Manager wireless networks it will show you a list of wireless Routers that you laptop has connected to, in the list look for the Router that you are connecting to and double left click on it it show you a window click on security this will show yout the settings for your windows security but the security will be encrypted as dots, the above instructions will show you how to get the security key from the router to be able to enter it in your windows settings and make the security key on the Router and your windows the same .

I hope that I have answered your question about getting your security Key :)

Linksys WRT120N... | Answered on Jun 04, 2019


I think you can try upgrading the firmware on your router,

Connect the computer to the router.
Download the latest firmware.
Open the setup page of the router and upgrade the firmware.
After upgrading the firmware, reset the router and reconfigure it manually.

See How to upgrade firmware on Linksys router.

Watch video: Linksys router setup

Linksys WRT120N... | Answered on Oct 25, 2018


Are you trying to install Linksys router?
You don't need to run the CD.
You can do it manually.
Connect your netbook to the router and open the setup page of the router.
Change the settings manually and you are done.
See Linksys router setup

Linksys WRT120N... | Answered on Oct 05, 2018


SSID

log into router and check what it is and if it is broadcasted.

Linksys WRT120N... | Answered on Oct 04, 2016


Linksys WRT120N Router installation


Linksys WRT120N... | Answered on Jun 30, 2016


I need to know what the wep key is

Linksys WRT120N... | Answered on Jun 29, 2016


In win 8.1 and 7 go to control panel and select the following in sequence.

1. Network and Sharing Center
2. Click on your Network Name (Shown in Blue)
3. When the WFI status window opens up select wireless properties.
4. Click on the security tab
5. When the panel opens up select "Show Characters" to display your network key.
Print or write out the key and save it in a safe place so you don't have to go through this again.

Linksys WRT120N... | Answered on Dec 19, 2014


You will need to check the setting of your wireless router.
Do you have any computer connected to the network?
Using one computer connected to the network, you can open the router page and check the wireless router settings.

Check this link for Linksys WRT120N router setup and troubleshooting

Linksys WRT120N... | Answered on Nov 24, 2014


Please reset the router by pressing the reset button on the router for 30 seconds.
This will require router to reconfigure the setings.

Linksys WRT120N... | Answered on Jun 19, 2014


Hello Friend,
Connect you computer directly to the cable coming with the internet.
Type cmd in the start menu and when you reach the command box
Type config in the box
This will display the ipV4 address which should be the internet gateway.
if this is 192.168.1.1 then we have to change the router ip ti 192.168.1.2
please follow this link how to change rotuter ip adress
http://ui.linksys.com/files/WRT160N/v3/3.0.00/index.htm
In the mid of this page router ip should be done to 192.168.1.2
please contact me if this still does not work.
amitawasthi104@gmail.com

Linksys WRT120N... | Answered on Jun 19, 2014


Please go to this link and download the software.
http://support.linksys.com/en-us/support/routers/WRT120N

Linksys WRT120N... | Answered on Jun 18, 2014


The setup software can be downloaded from here: http://support.linksys.com/en-us/support/routers/WRT120N/download . The drivers will be included in the download.

Linksys WRT120N... | Answered on May 05, 2014


The device can only support IPV4.

Linksys WRT120N... | Answered on Feb 24, 2014

Not finding what you are looking for?
Linksys WRT120N Router Logo

317 questions posted

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Mike

Level 3 Expert

4363 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

WRT Linksys

  • WRT Linksys

Most Popular Question

ro connect hp printer deskjet 3050

  • Computers & Internet
Loading...