20 Most Recent Kenmore 22422 Top Load Washer Questions & Answers


You most likely have a broken coupler between the motor and gearcase.
You can buy the part for about $10 or have someone come out and replace it for about $150-200.
If you will post the complete model number from the the washer so I can see which style cabinet you have, I will try to walk you through the repair. It isn't very complicated if you are handy with home repairs.
With the age of the machine it probably just needs a coupler, but it could also have a problem in the transmission or basket drive that has caused the failure.

Kenmore 22422... | Answered on Aug 14, 2019


The movie

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Kenmore 22422... | Answered on Apr 14, 2018


The washer could be stuck the seating .

Kenmore 22422... | Answered on Feb 03, 2018


Drain Pump is the most likely thing. Although could be leaking hose, or cracked tub, or leaking tub seal

Kenmore 22422... | Answered on Nov 13, 2017


Could be a tub seal leaking (not likely), or water pump leaking (very common), cracked outer tub, leaking hose. You would really need to take washer cabinet off machine to be able to see where it's actually leaking.

Kenmore 22422... | Answered on Oct 01, 2017


Fill setting has to be adjusted and the belt is slipping on the spin cycle and not generating enough centrifugal force to get the water out.

Kenmore 22422... | Answered on Aug 25, 2017


needs new brushes on the motor.....

cheers

Kenmore 22422... | Answered on Aug 18, 2017


sounds like the contacts in the timer are burned or siezed

Kenmore 22422... | Answered on Mar 24, 2017


does the motor hum? It is either a bad motor, clogged pump, or a bad timer

If you need further help, reach me via phone at https://www.6ya.com/expert/steven_a67ead41eb5fc62a

Kenmore 22422... | Answered on Jul 04, 2016


First, see the Sears parts site for your washer:
http://www.searspartsdirect.com/partsdirect/index.action

Enter your model number (###.######) and you'll see a list of major sub-components with diagrams and parts.

Newer model Whirlpool / Kenmore washers use a Lid Switch as a safety device. Unless the switch senses that the lid on the washer is closed, the washer will neither agitate nor spin.

Older models only used the switch during the spin cycle.

Try to bypass the Lid Switch by removing the Console and jumping the two outermost pins on the switch.

Following is a description of how to release the console for access to the pins.

http://www.american-appliance.com/catalog/newsdesk_info.php?newsPath=16&newsdesk_id=137

This is a Whirlpool PDF on how these washers operate. It has a diagram on jumping the switch as well as a detailed section on how the transmission works.

https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/f7e2147fa98b28cf85257122007475cb/$FILE/L-55.pdf



It also has a troubleshooting guide.

To bypass the switch, you only have to disconnect the power to the washer, tilt the console back, unplug the switch and using an short piece of insulated wire, jump the two outermost contacts on the connector coming from the console and plug the washer back in.

Following is a description of how to gain access to the console and how to remove the cabinet if necessary.

http://www.american-appliance.com/catalog/newsdesk_info.php?newsPath=16&newsdesk_id=131&osCsid=913ba652cd504fb162f87d892bcb427b

With the jumper in place, try to re-start the washer.

If it works, the Lid Switch is a relatively inexpensive part.

Kenmore 22422... | Answered on Mar 17, 2016


ABDULLAH,CHECK POWER OUTLET MAKE SURE HAVE POWER, MAKE SURE SWITCH ON TOP DOOR IS NOT STUCK,, TOMORROW, CALL SEARS REPAIR CUSTOMER SERVICE FOR MORE HELP!!

Kenmore 22422... | Answered on Jan 24, 2016


it sounds like faulty timer its were the big dial is at ,you may need to call service to repair it sorry its no easy fix.

Kenmore 22422... | Answered on Oct 28, 2015


Hi,
If you are having a problem with your top load washer then check out this tip...

Washing Machine2_bing.gif does not Pump or Spin
http://www.fixya.com/support/r4617986-washing_machine_not_pump_or_spin

If you are having problems with your front load washing machine2_bing.gif then checkout this tip...

Front Load Washing Machine2_bing.gif not draining and or not spinning
http://www.fixya.com/support/r4784376-front_load_washing_machine_not_draining

heatman101

Kenmore 22422... | Answered on Aug 06, 2015


water level switches are bad

Kenmore 22422... | Answered on Jul 16, 2015


Dear Whitworth,

please rate this solution if it meets ur needs, else choose fixya...

The agitator's movement back and forth is important for the cleaning of your laundry. If it doesn't function properly, your clothes won't be as clean as possible. If your agitator does not move, moves only in one direction or its movement is very weak, you will probably need to remove the agitator. Furthermore, in order to inspect the tub for leaks, the clutch assembly, the splines, or to remove the spin drum, you will have to remove the agitator.

The agitator is fastened to the agitator shaft and its movement is driven either by splines or a simple clutch assembly. The splines are usually plastic or rubber nubs on a cylinder that fits over the agitator shaft. If the nubs wear down, the shaft will not turn properly or it will turn weakly. If the agitator is moving in only one direction, the likely cause is the clutch assembly. The clutch has dogs that depress and pop up with each turn. If those dogs are worn, they will not engage properly and the agitator will turn only in one direction.
Various makes and models differ in how the agitator is removed. In some newer models, the agitator just lifts straight up and out. However, in most models you will have to do some combination of the following steps. First remove the fabric softener dispenser, if any. It should either lift or screw off. Next remove the cap. It may lift off, screw off or failing that, it may need to be pried off.
Beneath the cap some agitators are secured in place by a bolt. Use a socket wrench with an extension to remove that bolt. Some Maytags may have a screw near to the bottom of the agitator post that must be removed. Now try to lift the agitator straight up, possibly with a little back and forth rocking motion. Use caution when pulling, the agitator may come loose suddenly and hit you in the face or send you flying backward.
If the agitator is particularly stubborn, you can loop some rope under one side of the agitator at the bottom and then up over a broom handle. Now loop it again under the other side of the agitator and back up to the broom. Brace one end of the broom handle against the top of the washer and lift up on the other end. Double check that you have removed anything that may be securing the agitator in place. Do not use too much force or you may damage the washer cabinet, agitator or injure yourself.
Click here to order replacement parts.


please rate this solution if it meets ur needs, else choose fixya..Thank you.

Kenmore 22422... | Answered on Apr 10, 2015


If the washer doesn't reach its proper spin speed, the clothes may be too wet at the end of a cycle. Check to be sure the load is properly balanced and run a spin cycle again. If the clothes are still wet, you may have a worn clutch.

Kenmore 22422... | Answered on Mar 01, 2015

Not finding what you are looking for?
Kenmore 22422 Top Load Washer Logo

1,909 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

fordexpert

Level 3 Expert

5692 Answers

Harvey Mahal

Level 2 Expert

39 Answers

Kristen Denison
Kristen Denison

Level 1 Expert

13 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kenmore Washing Machines

  • Kenmore Washing Machines

Most Popular Question

troubleshoot kenmore washing machine

  • Washing Machines
Loading...