20 Most Recent Apex Digital LD3249 LCD TV Questions & Answers


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Apex Digital... | Answered on Sep 15, 2016


Hi,
The Unisar DH900 input uses a 3.5mm stereo audio jack for input, whatever you need on the other end depends on to what you are connecting it to, here are the I/O specs for the Unisar DH900, it should come with various adapters to suit most eventualities, http://www.yourhearing.net/pdf/HC-DH900.pdf

Apex Digital... | Answered on Jan 21, 2016


check that screws are not concealed by a removable plastic cover

Apex Digital... | Answered on Aug 31, 2015


Sounds like main board fault. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy Pull up older posts. Surf the site with patience.
http://electronicshelponline.blogspot.com/

Apex Digital... | Answered on May 08, 2014


Check whether those channels have been skipped. If skipped, get tem back. Refer its user manual for details.

Apex Digital... | Answered on Jan 25, 2013


The digital volume control section circuit has the fault. You have to check its main digital board. Might need replacement.

Apex Digital... | Answered on Nov 27, 2012


A nasty short somewhere or wrong voltage to set---do not keep plugging it in and tripping the breaker--in fact do not plug in at all until a technician examines it(tell him/her what the issue is).

To answer the question here: Dead short on or across the AC voltage line inside the set most likely of primary side of power supply.

Apex Digital... | Answered on Nov 04, 2012


Google the model of the remote with "manual" or codes.

Apex Digital... | Answered on Mar 27, 2012


need to get in to bios and tweek your EUID. Your computer isnt recognizing your HDMI TV.

Apex Digital... | Answered on Jan 27, 2012


It will be marked Var audio out if you have it.

Apex Digital... | Answered on Jan 25, 2012


The Comcast Universal remote codes for Apex Digital are:
0748
0765
0767

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Apex Digital... | Answered on Jul 02, 2011

Not finding what you are looking for?
Apex Digital LD3249 LCD TV Logo

64 questions posted

Ask a Question

Usually answered in minutes!

Top Apex Digital Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76060 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you an Apex Digital Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Apex Digital Televison & Video

  • Apex Digital Televison & Video

Most Popular Question

picture keeps flipping in all modes

  • Televison & Video
Loading...