20 Most Recent Rustoleum Rust-Oleum Epoxy Shield Professional Semi-gloss Dunes Tan Floor Coating Kit 203846 Questions & Answers


You're probably already done with your project by now, but you should wait at least 24 hours, lightly sand, and wipe surface with acetone and a microfiber towel before applying a second coat.

Rustoleum... | Answered on Mar 17, 2015


There is no effective long term way to store tubes of silicon. Even unopened tubes have a finite shelf life. I have found the most effective way to store opened tubes for medium lenght time, is to allow a bit of excess to flow over the tip, and allow it to form a plug. In a few months, this plug may extend the full length of the nozzle, but you can push this out with a piece of steel rod (from the tip end). I keep my tubes of silicone and caulking in a cool dry place. I've never tried the bucket of water method, so I don't know how successful that would be.

Adhesives,... | Answered on Jan 02, 2019


First start the cleaning process, clean all dirt and debris from the concrete driveway surface. Use concrete caulking or concrete sealer to fill the crack. With the help of troweler fill the crack properly and make smooth surface. Now let the driveway be dry. Now coat the concrete driveway with concrete sealer oil-based polyurethane to make the driveway water-resistant. Finally you can use colored concrete patching compound to match with the previous driveway color.

Adhesives,... | Answered on Sep 21, 2018


On pre-mixed buckets, a lot of dry-wallers add just a little water and whip it up when tape and texturing. It flows of the blade better. But, if you're just repairing a few holes, dings and gouges, then no real need............unless it's really thickened up on you.
If you have a partial bucket and are not going to use it for a while, you may want to flick some water on the surface and lay Saran wrap on the surface, then cap the bucket.

Adhesives,... | Answered on Mar 12, 2018


The best product that will not harm the poster or window is silicone caulk. There are also some crystal clear adhesives made from silicone now available.

Adhesives,... | Answered on Nov 19, 2017

Tip

How to get superglue off fingers


Through necessity when nothing else was available, I found that acetone / nail polish remover dissolves or at least softens superglue.
After the back of a folded tube burst, hands covered in the stuff, I tried various products.
Hand soap, dishwasher, Handy Andy and Methlylated spirits have little effect.
Laquer thinners also helps a bit, although acetone seems best.
Pour full bottle into glass or metal container - not plastic, which will melt..
When rinsing hands in acetone, rub & scrub to remove stubborn bits still stuck.
Concentrate under fingernails, where skin and nail meet.
After removal, re-bottle actetone for future use.
Lanolin oil in skin will also be removed, so after acetone-bath, wash well with hand soap, rinse, treat skin if required with a moisturizer cream.
If your'e a guy, live with it - it'll give your hands a manly, rugged outdoor look! :)

on Oct 19, 2017 | Adhesives, Coatings & Sealants


If it's a mobile home he probably has it 2-12 pitch roof I would use roll roofing instead of shingles hope this helps

Adhesives,... | Answered on Mar 19, 2017


no this is overkill. the seem tape is only necessary for seems, screw holes can be covered by a coat of joint compound, and sanded smooth after it dries

Adhesives,... | Answered on Jul 27, 2015


They're not the same thing, spackle is used to fill in holes or indetations made from nails in drywall while joint compounds are used to join drywall panels together.

Adhesives,... | Answered on Jul 27, 2015


at least 2. I would suggest to look closely after the second coat dries. if you have a smooth transition than it is fine, if not, a third thin coat should make the finished product look better

Adhesives,... | Answered on Jul 27, 2015


Silicone-based caulk is often applied to the underside of bathroom sinks in order for the caulk to seal the gap between the sink and the wall, preventing moisture from getting underneath the sink.

Adhesives,... | Answered on Apr 20, 2015


It's a waterproof sealant used in household repairs and building.

Adhesives,... | Answered on Apr 16, 2015


You should coat your deck using a roller or a paitbrush I haven't seen anyone using an air brush. This could be because it can be hard to get into all the nooks and crannies in the wood using an air brush.

Adhesives,... | Answered on Mar 17, 2015


The time it takes for the joint compounds to dry depends on brand that your using. Generally 12 hours is enough, I like to let it dry over night.

Adhesives,... | Answered on Mar 16, 2015


GREAT STUFF Big Gap Filler Insulating Foam Sealant 16 oz. $4.96 at Home Depot. Comes in a spray can with straw.

Adhesives,... | Answered on Feb 02, 2015

Not finding what you are looking for?
Rustoleum Rust-Oleum Epoxy Shield Professional Semi-gloss Dunes Tan Floor Coating Kit 203846 Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Rustoleum Adhesives, Coatings & Sealants Experts

Andrew Taylor
Andrew Taylor

Level 3 Expert

29145 Answers

Frank

Level 2 Expert

139 Answers

blfrancis

Level 1 Expert

31 Answers

Are you a Rustoleum Adhesive, Coating and Sealant Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Rustoleum Adhesives, Coatings & Sealants

  • Rustoleum Adhesives, Coatings & Sealants

Most Popular Question

husband painted our garage last night

  • Adhesives, Coatings & Sealants
Loading...