20 Most Recent Biostar G41M7 Motherboard Intel Pentium Dual Core E5300 Processor Bundle (G41M7 WBX80571E5300) Questions & Answers


check memory ram....

Biostar G41M7... | Answered on Mar 26, 2019


Restart your computer
During the boot process you will see on the screen to press a certain key to enter setup usually the Delete or F2 key
this will vary depending on your computer and operating system

Press and hold that key during the boot up process to enter BIOS using the arrow keys load failsafe defaults or load optimized defaults press escape then press f10 to save to cmos to restart


this will reset cmos
hope this helps

Biostar G41M7... | Answered on Sep 20, 2012


You might have some viruses and malware.

Start your PC and press F8 several times until the boot menu comes up. Then select "Safe Mode with Networking". Now get some or ALL of the FREE programs below..

Download, Install and Run Malwarebytes Anti-Malware:
http://majorgeeks.com/download.php?det=5756
When Installing choose the non-pro version.

Download, Unzip, Install and Run TDSSKiller:
http://majorgeeks.com/Kaspersky_TDSSKiller_d6895.html

Download, Install and Run Super Anti-Spyware:
http://majorgeeks.com/SUPERAntiSpyware_d5116.html

If you have an outdated Anti-virus program then Download, Install and Run Avira Anti-Virus:
http://majorgeeks.com/Avira_AntiVir_Personal_-_FREE_Antivirus_d955.html
Make sure to select ALL of the "threat categories" when you install or configure Avira...

You should be in pretty good shape if you run and install all of these programs.

Biostar G41M7... | Answered on Jul 01, 2012


usually that signals a memory failure of some kind, try pulling some of your ram chips and trying different configurations.

Biostar G41M7... | Answered on Sep 06, 2011


http://www.biostar.com.tw/app/en/mb/content.php?S_ID=421 click here, go to the manual tab, download the manual and it should show you where the connection are and what pins is for which.

Biostar G41M7... | Answered on Jan 31, 2011


One bad lead can cause a computer to continue on a cycle or to shutdown or fail to detect your hard drive

Test all leads that attach to your hard drive including electrical extensions,IDE,SATA

the leads from your motherboard to your hard drive make sure they have a secure connection and are not faulty or just replace them there probably old and faulty

hope this helps

Biostar G41M7... | Answered on Dec 05, 2010


Biostar motherboards have a 1 year warranty and require proof of purchase.

http://www.biostar-usa.com/app/en-us/support/rma.php

Biostar... | Answered on Aug 19, 2019


if you have an internet access... use windows update

Biostar... | Answered on Mar 26, 2019


Try another mobo or another set of ram figure out which is bad

Biostar... | Answered on Mar 18, 2019


Find drivers with 3Dp chip Software

http://www.3dpchip.com/3dpchip/sub/chip_eng.html

Biostar... | Answered on Jul 17, 2017


Not sure how u shorted it out installing ram. Theres only 1 way the put it in and there should have been NO power on the board at the time. AND I'd like to know how you think the board is shorted out. What is happening? It's a very rare occurrence and there are other easy fix issues that might make a person think the board is fried. Let me know your answers to these questions so I can help further.

Biostar... | Answered on Apr 13, 2017


clone the bios from the website of biostar

Biostar... | Answered on Jan 29, 2016


No, Biostar advertises that you should use low voltage memory on this board. My experience that when 1.5 volt memory is installed in a 1.35 volt system, it is not reliable. (Intermittent Crashes.)
You would have to increase the memory voltage, this is only possible on full blown gaming motherboards designed for overclocking the memory.
A j1900NH2 supports S states, but it does not support memory overclocking.

Biostar... | Answered on Dec 22, 2015


No, Biostar advertises that you should use low voltage memory on this board. My experience that when 1.5 volt memory is installed in a 1.35 volt system, it is not reliable. (Intermittent Crashes.)

Biostar... | Answered on Dec 22, 2015


many things enter into your problem . memory size is the biggest no doubt .

Biostar... | Answered on Aug 17, 2015


See the manual:

ftp://ftp.biostar-usa.com/manuals/M7VIG%20400/M7VIG400manual.pdf

Page nr. 9 you cane see JPANEL1 pin assignement.

Biostar... | Answered on Mar 30, 2015

Not finding what you are looking for?
Biostar G41M7 Motherboard  Intel Pentium Dual Core E5300 Processor Bundle (G41M7 WBX80571E5300) Logo

10 questions posted

Ask a Question

Usually answered in minutes!

Top Biostar Computers & Internet Experts

Jayburt

Level 2 Expert

89 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Biostar Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Biostar Computers & Internet

  • Biostar Computers & Internet

Most Popular Question

find port connect atx style

  • Computers & Internet
Loading...