20 Most Recent DISH Network 32 Ir 137180 Remote 5900 3100 4100 Questions & Answers


I would try changing the batteries. If that doesn't do the trick then you either need to reprogram the remote or just call Dish and they will issue you a new remote.

DISH Network 32... | Answered on May 07, 2014


Anthony Stewart,

I hope this has been resolved for you by now, but if not I would be happy to help! Below I have listed the steps to program the remote to both the TV and Receiver. If you have any other questions, let me know!

Addressing Remote to Receiver:

1.) Go to System Info screen.
2.) Hold down the SAT button until all mode lights light up.
3.) Enter a number between 1 and 15 using the numeric keypad on the remote.
4.) Press the pound (#) button.
5.) Once the SAT button blinks three times, press record.
6.) Test remote and see if it works.

Addressing Remote to TV:

1.) Press and hold the clear TV button until all mode lights light up.
2.) Release and TV light will be blinking.
3.) Enter code and press #. The TV button should flash 3 times.
4.) Try functions (Volume, Power, etc..) and see if it is working.
5.) If no function, repeat steps 1-4 with another code.

DISH Network 32... | Answered on Aug 25, 2012


hanque,

I would need more information on if you're trying to program it to the TV or the receiver to provide you a specific answer, but to get you started I do have some information you could use.

To program your remote to your receiver you can find the instructions at this link based on your receiver: http://www.dishnetwork.com/SupportSection/remote-setup

To program your remote to the TV or other equipment you can find the codes at this link: http://www.dishnetwork.com/SupportSection/apps/remotecodes.aspx.

If you can provide more information on what you're looking to address I can definitely assist you further. You can reach me here or at thomas.faust@dishnetwork.com!

Tommy Faust
DISH Network

DISH Network 32... | Answered on Oct 18, 2011


It sounds like the remote would need to be address to the receiver. This needs to be done from the main TV location, and I have listed the steps below!

Addressing Remote to Receiver:

1.) Go to System Info screen.
2.) Hold down the SAT button until all mode lights light up.
3.) Enter a number between 1 and 15 using the numeric keypad on the remote.
4.) Press the pound (#) button.
5.) Once the SAT button blinks three times, press record.
6.) Test remote and see if works.

Hope that helps!

Tommy Faust
DISH Network

DISH Network 32... | Answered on Jul 07, 2011


Have you tried unplugging the receiver for 10 seconds? Also, do the other functions on this remote work properly? You can also try reprogramming the remote by pressing the system info button on the front of the receiver and pressing the "SAT" button you should hear three tones confirming it worked. If you need further assistance e-mail me at daniel.busa@dishnetwork.com

Daniel Busa
DISH Network
Customer Service

DISH Network 32... | Answered on Jun 29, 2011


Hello, this sounds like you have a problem with your DISH remote. If you are, here are some steps to get it working. The first set of steps is to get it working with the tv, the second for getting it working on your receiver.

TV:
1. Hold down the Clear TV button until all lights at the top of the remote light up
2. Press the red TV POWER button
3. Press and release the up arrow on the remote about once a second until the tv turns off.
4. When it turns off, press the # (Pound) button
5. Try powering the tv on/off, and try the volume. If one or more of these functions do not work, start over at step 1 again.

RECEIVER:
1. Go to System Info Screen
2. Press and release the SAT button on the remote one time
3. Press the black and red record button 3 times.
4. The number next to the remote address should change.


Becki Barned
DISH Network Customer Service

DISH Network 32... | Answered on Feb 16, 2011


trifonas_ger

If you are trying to use your Samsung TV remote, it will not work with our DISH receiver. Some universal remotes can be programmed to the receiver but you may not get full functionality with the universal remote. Our remotes are designed to allow for functionality for the TV if programmed to the DISH remote (volume, on/off). I hope this helps.

Ray Calo
DISH Network

DISH Network 32... | Answered on Feb 05, 2011


Hey there! This is Becki Barned with Dish Network customer service. This is no problem!!! First, make sure that you are in front of the receiver for this process, then try these simple steps. Hope this helps!!!!! http://www.dishnetwork.com/SupportSection/remote-control

DISH Network 32... | Answered on Dec 25, 2010


The most common way is unplug the power cable for 5 minutes.

DISH Network... | Answered on Jul 07, 2014


Open the unit and trace the power cord connection from the wall plg wire to the FIRST connected control inside the unit. Voila!

Home Security | Answered on Oct 09, 2019


Adjust the distance to the chime on the B U M setting. Go into the duffilator chip settings control and twist clockwise until this disappears. Shouldn't take more than a 1/2 turn or so.

Home Security | Answered on Oct 09, 2019


Use the right code number.

Home Security | Answered on Oct 09, 2019


Go to a locksmith. Bring lots of money.

Home Security | Answered on Oct 09, 2019


Be sure the safe door is held in tightly enough for the sensor to register it is in the right position for the lock to engage when you are pressing the "close" key sequence.

Home Security | Answered on Oct 09, 2019


It's admin and no password

Home Security | Answered on Oct 08, 2019


Red plus 12v
yellow video output
screen bare wire 0v and video earth

Home Security | Answered on Oct 08, 2019


Did you reset it? If not try a reset this will usually fix the issues with those types of doorbells.

The reset option is under the face plate.

Home Security | Answered on Oct 07, 2019

Not finding what you are looking for?
DISH Network 32 Ir 137180 Remote 5900 3100 4100 Logo

15 questions posted

Ask a Question

Usually answered in minutes!

Top DISH Network Home Security Experts

Brad Brown

Level 3 Expert

18108 Answers

Marvin
Marvin

Level 3 Expert

85178 Answers

Lawrence Oravetz

Level 3 Expert

10543 Answers

Are you a DISH Network Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

DISH Network Home Security

  • DISH Network Home Security

Most Popular Question

remote doesn 39 t work won 39 t

  • Home Security
Loading...