20 Most Recent Citizen Skyhawk Eco-Drive JR306059F Wrist Watch Questions & Answers


This problem may be due to your analog hands being improperly zeroed. To find out, try this: 1. Put the watch in chronograph mode by rotating the crowon in its normal position to "chr" 2. Pull out the crown two clicks. This should cause all of the hands to point to zero. If you do this and your minute hand points to 1 o'clock, or five minutes, you will know that this is the problem. If this is the problem, you can can correct it by zeroing the hands as follows: 1. Put the watch in chronograph mode by rotating the crowon in its normal position to "chr" 2. Pull out the crown two clicks. This should cause all of the hands to point to zero, or close to it. You should also notice the letters "HR" in the lefthand digital display. This allows you to move the hour hand by rotating the crown. If the hour hand is not pointing at 12 o'clock, rotate it so that it does. 3. Push the top button once. The letters "MIN" should appear in the lefthand digital display. This allows you to move the minute hand on the large dial, and the minute and hour hands on the small UTC dial. Rotate the crown so that the minute hand points directly to 12 o'clock. 4. Push the top button again. The letters "SEC" should appear in the lefthand digital display. Rotate the crown to point the second hand directly at 12 o'clock. 5. Push the crown back into its normal position. Set the digiatl time and date in your tie zone, and your analog hands should match the digital read-out. If the zeroing of the hands is not the problem, I don't know what is wrong with the watch.

Citizen Skyhawk... | Answered on Jun 24, 2019


I just had this problem. Put it to the chronograph, pull out the crown to the 3rd position, press the A+B buttons at the same time until everything on the display comes on.

Push the crown back in and the watch will be totally reset. Should be fine after that.

Citizen Skyhawk... | Answered on Jan 29, 2019


The hands are driven by the digital. It seems to me you have the wrong digital city. Please review the setting instructions for your Skyhawk at: http://www.citizenwatch.com/

BTW, I love my Titinimum Skyhawk

Citizen Skyhawk... | Answered on Dec 23, 2015


Did you register the watch with Citizen UK? because they can give support, after you registered. I don't think they mind if you bought the watch outside the UK, as long as it is not on a list with stolen watches.
http://www.citizenwatch.com/en-us/

Citizen Skyhawk... | Answered on May 11, 2014

Not finding what you are looking for?
Citizen Skyhawk Eco-Drive JR306059F Wrist Watch Logo

194 questions posted

Ask a Question

Usually answered in minutes!

Top Citizen Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

841 Answers

Ekse

Level 3 Expert

13434 Answers

Felipe Valera...

Level 1 Expert

7 Answers

Are you a Citizen Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Skyhawk Citizen

  • Skyhawk Citizen

Most Popular Question

analog clock not in sync digital clock

  • Watches
Loading...