20 Most Recent
Questions & Answers
Tally t8024 error message "set drum cartridge"
The 'Set Drum" error indicated the printer is not detecting the drum cartridge
located in the printer
I would recommend
doing the follwoing;
- Ensure the drum cartridge locates correctly in the printer. Remove it and re-seat if necessary.
- Ensure the top cover (the one that opens upwards to change the drum) shuts correctly, this cover pushes the drum into the printer.
If the above actions do not fix the problem, I am afraid the covers will need to come of the printer
. There is a gear mechanism located on the left side of the printer that operates when the top cover closes.
This gear mechanism
will need to be aligned
with the alignment
marks, it sounds like the gears will have slipped and the timing is slightly
on Feb 18, 2011
I CLEARED A PAPER JAM ON T8024 AND RESTARTED THE
Check the following possibilities that may causing the error message.
1. Some times more paper may be taken in the paper feed area, check for any other paper jam in other area of the printer.
2. Remove all the printer drives, ports and uninstall the printer software and once again reinstall it by following steps given below
Start - Control Panel - Add and Remove Programs - Remove the program in the list called Tally Laser printer.
By now you have uninstall the software and now reinstall the software with the available cd given at the time of printer purchase and start printing.
on May 11, 2010
Tally T8006 Network set up
You can access the the NETWORK men on the T8006 by powering the pritner ON holding down TRAY
You should then be able to change your IP Get method and network settings.
Exit the menu by pressing the UP Arrow untill you see RESET on the display, then wait wilst the pritner restarts and it should have saved the new network settings.
on Oct 02, 2009
Not finding what you are looking for?