20 Most Recent Weiser Lock GED1460X3BR Lifetime Polished Brass PowerBolt Powerbolt Touchpa Questions & Answers


Directions should be included with the replacement.

Weiser Lock... | Answered on Jul 29, 2016


Not sure on a Weiser but on mine there are small Allen screws on each side of the cover that have to be removed that allow the cover to be removed.

Weiser Lock... | Answered on Jan 31, 2015


The installation instructions:

http://www.weiserlock.com/PDFs/instructions/Electronics/Powerbolt.pdf

A note about PDF files: If you cannot view a given file, you need to first install Adobe Reader. You can get the free download here:
http://get.adobe.com/reader/

Weiser Lock... | Answered on Sep 10, 2012


At any hardware store. take the threaded part with you to get the right one.

Weiser Lock... | Answered on Apr 12, 2012


Weiser has a one year warranty against electronic problems and a lifetime warranty for mechanical and finish problems with their locks. Contact them from this link:

http://www.weiserlock.com/en/Products/SmartSeries/Powerbolt.aspx

Good luck!

Weiser Lock... | Answered on Nov 06, 2011


The Weiser brand and Kwikset brand Powerbolt are identical (Black & Decker), so these instructions will work just fine for you:

http://www.kwikset.com/Customer-Support/Product-FAQs/Faq/50160000000HhhEAAS.aspx

Notice that the above is a .PDF file type. That means that you need to have Adobe Reader or similar installed on your computer to view it. So if you are unable to view the file, download (for free) and install Adobe Reader first. You can get it here:

http://get.adobe.com/reader/

Good luck--and please provide feedback if this helps!

Weiser Lock... | Answered on Nov 06, 2011


How do I change the access code (and delete my old code) on my Powerbolt 1000?
The steps below are to change your access code to a new code. This will also remove any previous codes stored in the Powerbolt's memory.

pb1000programbutton.jpg

  1. Manually put the bolt in the extended (lock) position. Press the PROGRAM button once, enter your new 4 - 8 digit code and then press the LOCK button.
  2. Press the PROGRAM button twice, enter the same new code and then press the LOCK button once.
  3. Press the PROGRAM button three times, enter the same new code and then press LOCK once.
If your old code still remains in the unit, you will need to perform a hard reset of the unit. To perform a hard reset of the unit, remove all four batteries and leave them out for 1 hour. After the hour has passed, you may re-enter the batteries.

Weiser Lock... | Answered on Jun 23, 2011


Here's a link which tells you how to remove the cover, and reprogram the lock codes:

http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

Weiser Lock... | Answered on Mar 05, 2011


Here's a link which tells you how to remove the cover, and reprogram the lock codes:

http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

Weiser Lock... | Answered on Mar 05, 2011


Try this:
Here is a link to the Frequently asked question page for your lock:

http://www.weiserlock.com/Support/Faq/50160000000HhmZAAS.aspx

I have installed your Powerbolt, but when I push the Lock Button, it unlocks? What should I do?
First remove the cover on the inside of the Powerbolt unit. On the right hand side under the batteries, you will notice that is says "Door Direction Jumper". If the cap is mounted on Prongs 1 & 2, carefully remove it and move it over so that it mounts Prongs 2 & 3. A is right handed, B is left handed.

Here's a link which tells you how to remove the cover, and reprogram the lock codes:

http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

Weiser Lock... | Answered on Mar 05, 2011


see this page - http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

Weiser Lock... | Answered on Dec 26, 2010


Sounds like the lock was instaled wrong. If the lock has been there for some time then the lock has gon bad and needs to be replaced.

Good Luck

Weiser Lock... | Answered on Dec 01, 2010


not enough information
photos may help but might be faster to buy new lock

be safe

Weiser Lock... | Answered on Jun 08, 2019


Recut from another key.

If no keys, a locksmith will put in a new cylinder in with a set of three matching keys. My whole hotel in the UK was fitted with Weiser locks.

See the link
weiser lock cylinder replacement Google Search

Weiser Lock... | Answered on Feb 21, 2018


I'd try a new battery to "rule out" that as a problem, sometimes the contacts need a "turn" of the battery to make good contact.

Weiser Lock... | Answered on Feb 11, 2018

Not finding what you are looking for?
Weiser Lock GED1460X3BR Lifetime Polished Brass PowerBolt Powerbolt Touchpa Logo

17 questions posted

Ask a Question

Usually answered in minutes!

Top Weiser Lock Locks & Locksmithing Experts

Azam Ali

Level 1 Expert

31 Answers

Scoee Scoffer

Level 2 Expert

162 Answers

Cindy Wells

Level 3 Expert

6029 Answers

Are you a Weiser Lock Lock and Locksmithing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Weiser Lock Locks & Locksmithing

  • Weiser Lock Locks & Locksmithing

Most Popular Question

need reset code

  • Locks & Locksmithing
Loading...