20 Most Recent Toshiba e-Studio162 Copier Questions & Answers


Hi:

Try either 123456 or toshiba as those are the usual default passwords.

Good Luck

andrew

Toshiba... | Answered on Aug 09, 2011


try restarting the pc then un insatall it then restart and unplug the machine and wait for the program to prompt for you to switch on the machine hope thathelps you

Toshiba... | Answered on Mar 21, 2011


Probably the ADF roller is worn out, try clean the roller. Otherwise u need to replace it.

Toshiba... | Answered on Jun 28, 2010


Please dont try with setup wizard , please connect the usb cable between computer and printer then turn on the copier at that time new hardware found will appear, then you have to select YES THIS TIME ONLY. you have to select the driver location

Toshiba... | Answered on May 27, 2010


Hi

This normally means the waste tanks are full and it needs to be serviced. The printer will not normally work at all until this is done.

Taking to a computer repair centre as long as they are reputable should resolve the issue (until the next time)

Thanks

Taz

Toshiba... | Answered on Oct 23, 2009


Hi:

That error is referring to the fuser unit not reaching it's correct temp. within a specified period of time. You can try clearing this error with the procedure I will give you, but if it comes back then a service tech should look at it.

With the machine on and the error displayed press these keys in this order quickly. # * Clr * This will put you in a service mode. At this point key is 14 and press Start. Shut off the copier and try turning it back on and check to see if the error has gone away.

Andrew

Toshiba... | Answered on Aug 09, 2009



* ( with head)2 & 8 simultaneuosly*(with head) you can enter the service mode

Toshiba... | Answered on Jul 16, 2009


hello Josh. I can tell you "bulletproof verbatum" from the service manual what this error code means.But for me to merely try to help you{as I am} , I will be penalized by this website "FIXYA" since unless you are a trained Canon technician the info I provide will not truly "fixya".But I would rather lose my rating than let you potentially be screwed by a the local copier dude.Just please give me a decent rating/vote when you get a chance to comment on thr quality of my help for you. This code has to do with the fusing unit, a common component on all copiers. The fusing unit is responsible for providing extreme heat and pressure to to the paper and potential image as it reaches the exit of the copier. The heat and pressure "bond" the toner to the paper. The temperature can approach 380* F and therefore must be controlled in redundant ways to insure safety. Your machine has among the redundant systems two "active" temperature sensing devices called thermistors.They each monitor the temperature of the "fusing "unit, and are located in different areas to better monitor the temp. They also compare each other's temp to once again insure safety. Your code means that the "non contact" thermistor and the end {contact} thermistor had a difference of temperature readings of 80*c for more than 500 milliseconds.This is abnormal and not possible if all is well. One or both are bad. The code can be reset, but if the problem is genuine and not a fluke then it will return. To reset the code. Press "additional functions" then the 2&8 simaltaneaously, the additional functions again. New screen. Press "function'. Press clear.....ERR. THen ok at the bottom. Power off an dhope for the best.Good luck.

Toshiba... | Answered on Apr 14, 2009


how can I reset the Toshiba estusio162 without calling for maintenance

Toshiba... | Answered on Oct 01, 2008


press button C & 8 at the same time to show u the error no. its the error no that will let u know the fault type.

Toshiba... | Answered on Sep 29, 2008


Do you have the Ga-1170 kit?

Toshiba... | Answered on Feb 14, 2008

Not finding what you are looking for?
Toshiba e-Studio162 Copier Logo

Popular Tags

24 questions posted

Ask a Question

Usually answered in minutes!

Top Toshiba Office Equipment & Supplies Experts

didi2005

Level 3 Expert

727 Answers

jasbo
jasbo

Level 3 Expert

2239 Answers

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Are you a Toshiba Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Toshiba Office Equipment & Supplies

  • Toshiba Office Equipment & Supplies

Most Popular Question

error code h4 00

  • Office Equipment & Supplies
Loading...