20 Most Recent Mitsubishi WD-52525 52" Rear Projection HDTV - Page 2 Questions & Answers


The ballast for the bulb is the culprit. That is the circuit board directly wired to the bulb. You can get a replacement on line at:
TV Parts Universal TV Stands DLP Chips ShopJimmy It's not difficult to change it yourself .

Mitsubishi... | Answered on Aug 08, 2015


No, but you can replace it.

Mitsubishi... | Answered on Jun 26, 2015


Unplug for a few should correct!

Mitsubishi... | Answered on Apr 03, 2015


There are two 1000uf 16V capacitors on the PWB that cause that problem code 34 lamp abnormality. If you need more info let me know.

Mitsubishi... | Answered on Mar 13, 2015


how are you hooking it up.are you using hdmi on both ends? computer and tv? if you are using an aadapter then you will have to have additional audio cables, as the adapters dont carry the audio

Mitsubishi... | Answered on Feb 15, 2015


Seems to be the inverter board that controls the bulbs! With the TV on if you shine a torch at the screen can you see a faint picture? If so it is the inverter board that needs replacing!

Mitsubishi... | Answered on Jan 04, 2015


Yes, there are three. The chassis fan, the exhaust fan and the fan for DMD.
The chassis fan is going to be mounted behind an intake air filter on the right side of the cabinet from the rear view. I am providing you the service manual.
http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=8&ved=0CFEQFjAH&url=http%3A%2F%2Fwww.audiolabga.com%2Fpdf%2FV26_Service_Manual.pdf&ei=QvWSVLjJJ8zIsAS2uYCQDQ&usg=AFQjCNF_iOS8W7HmGSRahWfnp68A4bOLCA&sig2=T8zMoyPLMAheVvkDZTFASg

Mitsubishi... | Answered on Dec 18, 2014


i unplugged the tv , turned the lamp switch to off . I left it unplugged for a few hours . I then plugged the tv back in , hit the reset button , located on the front bottom left . I waited for the timer light to stop blinking , then turned the lamp switch to the on position . I turned the power on to the tv . i heard the fan kick on , this time there was not a dragging sound . the screen lit up and i have not had a problem since yesterday . i think that the problem started because the tv had been left on for too long , I know that what i have done is only a temperary fix . but as long as I dont forget to turn the tv off , i should not have a problem

Mitsubishi... | Answered on Dec 13, 2014


We contacted Mitsu today in Irvine. Sounds to us like they're aware of a widespread problem with this model. Told us to get a Mitsu Tech to diagnose and fax to them the outcome and someone would contact us back within two days. Seems like so many are having the same problem and all about 2.5 to 3 yrs. old. I paid $3,500.00 for mine. I'm not going down without a fight with Mitsubishi. Thought they were #1 in the Big Screen world. CLASS ACTION LAWSUIT OR RECALL BY Mitsu should be in order....They know there is a problem with the power supply module.

Mitsubishi... | Answered on Nov 27, 2014


Dead pixels can not be repaired.
The model# WD-52525 you provided is for a DLP TV.
If you are seeing white dots on the screen it is due to a bad DMD chip or light engine. Unfortunately, it is not a cheap fix.

Good luck
www.aaatvservice.com

Mitsubishi... | Answered on Aug 16, 2014


error code 37 is either the dmd fan or the lamp fan. you can see the dmd fan with the cover off. you cannot set the lamp fan as it is under the light engine. I guess the easiest thing to do is get a lamp fan 299P282010 and a dmd fan 299P283010 and change them both.

Mitsubishi... | Answered on May 31, 2014


Hi Terrence
Probably bad connections in the lamp base.
Heat damaged or corroded or Over temperature sensor tripped.
When it goes out next, Bump it or Tap it to see if its mechanical contact problem. That will help diagnose where the problem is
Good Luck

Mitsubishi... | Answered on May 20, 2014

Not finding what you are looking for?
Mitsubishi WD-52525 52" Rear Projection HDTV Logo

1,606 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76100 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

WD Mitsubishi

  • WD Mitsubishi

Most Popular Question

bulb goes out after few minutes

  • Televison & Video
Loading...