20 Most Recent Mitsubishi WD-52525 52" Rear Projection HDTV - Page 3 Questions & Answers


no you cannot substitute a 680uf 16v 105c in place of a 1000uf
if you want to put a better capacitor in place of the old 1000uf 16v 105c , then use a 1000uf 25v or 35v 105c
the voltage rating will allow the cap to better handle the circuit

Mitsubishi... | Answered on May 04, 2014


The lamp housing has some screws you need to loosen, did you do that?

Mitsubishi... | Answered on Apr 18, 2014


What does the TV do when you try to turn it on?

Did you put the lamp door back on before you tried to turn the set on?

Mitsubishi... | Answered on Apr 18, 2014


Right next to the other controls on the TV, it is recessed so you will need a paper clip or ball point pen to press it.

Mitsubishi... | Answered on Apr 18, 2014


The monitor link is not a standard DVI connection, it was used to connect a Mitsubishi HD set top box. You can connect your cable DVR using component video cables and get HD that way, up to 1080i but not 1080p

Mitsubishi... | Answered on Apr 18, 2014


You might want to try a One for All remote and use its code search function to find the code you need. If you do not have instructions, you may be able to obtain them from the One for All site

Mitsubishi... | Answered on Apr 08, 2014


sounds like you have the pip(pic in pic) button on; try pressing the pip on remote to see if it removes split screen.

Mitsubishi... | Answered on Mar 01, 2014


The pop was a high voltage arc of electricity that blew some vital components on the main circuit board. The unit is of no use now. Repairs are far more than replacing the TV.

Mitsubishi... | Answered on Feb 27, 2014


Ballasts were sometimes problems with this set, but I also ran into problems with lamp thermal sensor. It's a small rectangular device sort of cream color and about 1/8th X 3/16th X 3/4 inch in size with lead coming out of one end. Also check safety interlock switch, which is actuated by lamp access cover being properly closed.

Mitsubishi... | Answered on Jan 02, 2014


see if there is dust inside blocking it.

Mitsubishi... | Answered on Dec 29, 2013


you have a bad dlp chip hear a link for you so it will help you to unstay.
how the light eng http://www.youtube.com/watch?v=eyAykjZ3zs4

Mitsubishi... | Answered on Dec 24, 2013


DO YOU HEAR THE BALLEST POWER UP AT ALL IT MAYBE BAD OR DI YOU PUT THE DOOR BACK ON THE LAMP ?

Mitsubishi... | Answered on Nov 25, 2013


NO THE LAMP DO NOT HAVE ENY THING TO DO WITH THE SOUND IF THE LAMP WAS BAD IT WILL NOT RUN AT ALL

Mitsubishi... | Answered on Nov 25, 2013

Not finding what you are looking for?
Mitsubishi WD-52525 52" Rear Projection HDTV Logo

1,606 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76099 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

WD Mitsubishi

  • WD Mitsubishi

Most Popular Question

bulb goes out after few minutes

  • Televison & Video
Loading...