20 Most Recent Rival Food Slicer Questions & Answers


If you need the grey plastic type, I can't help; but, if you need the metal type, I probably can. I normally stock recycled threaded shafts and thumb nuts for old Rival and Magic Hostess metal-framed (not folding plastic) slicers. I also have new rubbers suction cup feet and friction-reducing blade washers.


need-blade-retaining-nut-1da0kn30pxowr0ebacrfmmyb-4-0.jpg

Rival Food... | Answered on Jun 02, 2016


If you still have this problem, please provide details of the problem. Rival 1030 and 1101 series slicers had design changes over their run and several thickness mechanisms were used. Please describe; can you see the working parts or are they enclosed? Is the adjusting handle a crank like used on old-fashioned pencil sharpeners or more like those used on a manual can opener?

Rival Food... | Answered on Jun 24, 2015


If you still need these parts, contact lallin@juno.com. As of 11/25/14 I have both available - the parts are recycled, not new, but perfectly serviceable.

Rival Food... | Answered on Nov 25, 2014


If you still need this blade, contact lallin@juno.com as of 11/25/14 I have a recycled one in stock. Also have new suction cup feet, blade-washers and rubber motor dampers (where motor touches frame).

Rival Food... | Answered on Nov 25, 2014


Welcome..!!!!!

Rival Food... | Answered on Nov 25, 2014


Rival changed methods of blade attachment over the years, even within the same model designation. If what you need is the one or both of the pieces illustrated below, I often have salvaged parts. Ask for Threaded Shaft or Thumb Nut (two styles, interchangeable) or both,
. rival-electric-food-slicer-model-vtdpjfyeb3b45iy5l4cxbybs-3-0.jpg rival-electric-food-slicer-model-vtdpjfyeb3b45iy5l4cxbybs-3-3.jpg

Rival Food... | Answered on Oct 21, 2014


New blades have been unavailable for years.
In most cases, I can have your Rival 1005 thru 1030 or 1101 blade professionally sharpened and returned to you for less than the cost of a used blade. mailto:lallin@juno.com

Rival Food... | Answered on Sep 05, 2013


Still available on eBay or by contacting direct. mailto:lallin@juno.com

f828512d-b543-496c-8b93-f735deedb345.jpg


rival-food-slicer-parts-irggf4xa05cvmm0earr131af-5-2.jpg

Rival Food... | Answered on Sep 05, 2013


I'm a little late 8-(, but, if you still need one, I can provide a recycled one.

I also have newly-made replacment rubber suction cup feet, friction-reducing blade washers (go between blade and blade head) and rubber bumpers (alll three varieties) that attache to the foot on the slicer motor to reduce noise.

lallin@juno.com

Rival Food... | Answered on Mar 30, 2013

Not finding what you are looking for?
Rival Food Slicer Logo

38 questions posted

Ask a Question

Usually answered in minutes!

Top Rival Kitchen Appliances - Others Experts

Thomas F. Schneider

Level 3 Expert

2715 Answers

Vish Iyer
Vish Iyer

Level 2 Expert

75 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Are you a Rival Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Rival Kitchen Appliances - Others

  • Rival Kitchen Appliances - Others

Most Popular Question

need blade retaining nut

  • Kitchen Appliances - Others
Loading...