20 Most Recent Pioneer PD-F1007 301-Disc CD Changer Questions & Answers


HI, the Optical lens assembly has failed. either the attached motor has failed or, the lens has burned out.

this assembly will need to be replaced as a whole by the manufacturer in this case. the replacement parts are not available for consumer purchase.

Contact pioneer for a repair ticket asap.

Pioneer PD-F1007... | Answered on Aug 22, 2018


Try this:1. Remove the cover (2 screws on each side & 3 in the back).

2. Find a small white arm (more or less cylindrical, about 1" diameter, & about 3/4" long) and a longer (4-5"?) thin black arm in the center of the unit. These parts load/unload CDs to/from the playing area. You should see that a little knob on the white piece has jumped out of its track in the black piece.

3. Carefully put the knob on the white piece back in its track in the black piece. That should do it.

Pioneer PD-F1007... | Answered on Dec 13, 2011


1. Remove the cover (2 screws on each side & 3 in the back).

2. Find a small white arm (more or less cylindrical, about 1" diameter, & about 3/4" long) and a longer (4-5"?) thin black arm in the center of the unit. These parts load/unload CDs to/from the playing area. You should see that a little knob on the white piece has jumped out of its track in the black piece.

3. Carefully put the knob on the white piece back in its track in the black piece. That should do it.

Pioneer PD-F1007... | Answered on Dec 13, 2011


I found a fix in another thread. I tried it last night, and it worked. Nothing was broken; a moving plastic piece had just jumped out of its track. Here's the fix:

1. Remove the cover (2 screws on each side & 3 in the back).

2. Find a small white arm (more or less cylindrical, about 1" diameter, & about 3/4" long) and a longer (4-5"?) thin black arm in the center of the unit. These parts load/unload CDs to/from the playing area. You should see that a little knob on the white piece has jumped out of its track in the black piece.

3. Carefully put the knob on the white piece back in its track in the black piece. That should do it.

Pioneer PD-F1007... | Answered on Dec 13, 2011


You can download on
http://www.pioneerelectronics.com/pio/pe/vgn/images/portal/cit_11221/49439PRB1300A_200012292224475600.pdf

are the same commands

Rate my answer an give points.

Is important for people who share their knowledge, know your comments.
If the answer is helpful, rate my answers

Pioneer PD-F1007... | Answered on Sep 20, 2011


Problem with the power relay. The only option is - get in touch with a electronic technician who will better diagnose the parts and replace them.

Pioneer PD-F1007... | Answered on Mar 05, 2011


hit the thingymajiggermabob inside of it with a hammer than it shall work if not get a new one problem solved

Pioneer PD-F1007... | Answered on Dec 20, 2010


get a new one problem solved

Pioneer PD-F1007... | Answered on Dec 20, 2010


http://www.pioneer.eu/eur/support/manuals/PD-F1007/index.html

Pioneer PD-F1007... | Answered on Oct 24, 2010


if you email me yam_man_dan@yahoo.com (put pioneer pdf in title) will sed you service manual with realignment instructions plus disassembley instructions regards yammandan

Pioneer PD-F1007... | Answered on Aug 19, 2010


Hi Nick,

If you still have this problem I would contact Bruce Wentworth in the USA, listed below are his details.

Regards
Alan Hood
ami-man
UK

Bruce Wentworth A&B Jukebox Repair 56 Old County Rd. Plaistow NH 03865. A&B Jukebox Repair specializes in the repair of Rowe circuit boards in Rowe ...
www.abjukeboxrepair.com/

Pioneer PD-F1007... | Answered on Mar 26, 2010


According to the manual: U1= "The disc may not be loaded properly in the rack." Countermeasures: Reload disc Check for foreign object on disc Check for foreign object on rack

Pioneer PD-F1007... | Answered on Aug 11, 2009


HI.This will occur when the optical assembly becomes unstable. this ((Whole One Piece)), assembly incorporates the spin/load motor, optics housing /arm, tracking device and tracking rail. This is connected to the loading dock assembly. This 'NO Disc', code is the result of a failed or burned out lens. It is possible that you have a dirty lens cap. you can try using a cleaning disk in this case to confirm actual lens failure. if the cleaning doesn't restore normal reading capabilities, this will confirm my diagnosis.

You will need to have the optical assembly replaced in this case. once replaced, your unit will be able to read and track once more.

Pioneer PD-F1007... | Answered on Jul 26, 2009

Not finding what you are looking for?
Pioneer PD-F1007 301-Disc CD Changer Logo

29 questions posted

Ask a Question

Usually answered in minutes!

Top Pioneer Car Audio & Video Experts

The Knight
The Knight

Level 3 Expert

76100 Answers

Marvin
Marvin

Level 3 Expert

85160 Answers

xxxxxx xxx

Level 3 Expert

5013 Answers

Are you a Pioneer Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Pioneer Car Audio & Video

  • Pioneer Car Audio & Video

Most Popular Question

pioneer 301 cd player

  • Car Audio & Video
Loading...