20 Most Recent Pioneer DVR-3100 DVD DVD Recorder Questions & Answers


ensure that the aux 1 is set to ipod

Pioneer DVR-3100... | Answered on May 05, 2011


  1. You must be in the Disc Navigator (HDD)
  2. Highlight the title you want to erase.
  3. Select 'Erase' from the command menu panel.
  4. Select 'Yes' to confirm or 'No' to cancel, then press ENTER.
  • You can also Highlight the title you want to erase, press clear on the remote, and press ENTER.
Here is your manual: http://www.pioneer.com.sg/storefront/manual/DVR-530H.pdf

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Pioneer DVR-3100... | Answered on Feb 28, 2011


THe DVD is likely not finalized - or the recording medium is not an acceptable format on the other player.

Thanks!!

Pioneer DVR-3100... | Answered on Aug 24, 2010


Resetting the Recorder to Factory Settings
1. Make sure that the recorder is on
2. Press and hold the STOP button and STANDBY/ON button.
The recorder turns off with all settings reset.

Try this and let me know if it works.

Pioneer DVR-3100... | Answered on Mar 27, 2008


These are from the instruction manual:
If the recorder is on, switch it to standby
Press and hold STOP on the front panel for 3 seconds until the fron display shows unlock.

Pioneer DVR-3100... | Answered on Mar 27, 2008


I've seen this problem somewhere before, ran across it on a service call or something and I just can't remember where.. Just getting old I guess.. You should have a "Return" button on the remote. Press it and the "2"... That should allow you to access the unit again. What you've done basically is set the unit up as unit 2 and you could have as many as 3 identical units all operating from the same remote. So, Pioneer, in their infinite wisdom decided to make three specific designation points and allow you to switch the remote to access each one without disturbing the rest... If this doesn't solve the problem you might try calling Pioneer support, 800-421-1404 and they should clearly be able to help. Good Luck Bill

Pioneer DVR-3100... | Answered on Mar 27, 2008


Pioneer is not great about updates. Here is a link to the user manual. If has been purchased in the last year it should be up to date, and i would contact people where it was purchased.

https://www.pioneerelectronics.com/StaticFiles/Manuals/Home/BDP-31FD_OperatingInstructions0831.pdf

Pioneer... | Answered on Jul 17, 2019


Check out Amazon or ebay your bound to find it.

Pioneer... | Answered on Jul 10, 2019


first is to hear if sound is there when a DVD etc is connected to one of the rear audio and video inputs on the set.

Also check speakers in the set are in menu switched ON and not OFF.

If a cable box, sat box, receiver are in use check their settings for sound also==not a bad idea to unplug each unit and then after a few minutes plug each back (set , box, etc) to allow each to try to boot up.

Let me know what you find.

Pioneer... | Answered on Jul 02, 2019

Not finding what you are looking for?
Pioneer DVR-3100 DVD DVD Recorder Logo

Popular Tags

12 questions posted

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76100 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Marvin
Marvin

Level 3 Expert

85160 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Pioneer Televison & Video

  • Pioneer Televison & Video

Most Popular Question

play dvd recorded pioneer dvr 3100

  • Televison & Video
Loading...