20 Most Recent SkyScan 86709 Atomic Wall Clock Questions & Answers


I just changed the batteries yesterday. It was hard to open the battery compartment with bare hands/finders. I used flat screw driver to poke into the notch in the center of the transmitter. Or you can try poke into any **** around the compartment. It works!

SkyScan 86709... | Answered on Jun 05, 2019


link below will tell you how to set clock. scroll down about half way.

http://www.skyscan.info/content/manuals/15-model-28500.html

SkyScan 86709... | Answered on Mar 20, 2017


I just fooled around with the settings on the back of the clock and now I think I have it. It may or may not work.

SkyScan 86709... | Answered on Nov 02, 2016


When was the last time it was serviced? The movement probably needs a good cleaning and/or oiling.

http://usedclockparts.com/8-clock-movement-repairs/39-how-to-easily-clean-and-or-fix-your-clock-movement

SkyScan 86709... | Answered on Oct 03, 2016


You may need to try to repair or replace the quartz movement, this link will help you out.

http://usedclockparts.com/14-clocks/clock-videos/126-quartz-battery-operated-clock-movement-repair

SkyScan 86709... | Answered on Oct 03, 2016


You need new SioScan Temperature Transmitter 433 MHz. Take a look on amazon La Crosse Technology TX6U Wireless Temperature Sensor for 433 MHz units.... Hope this was helpful. cheers
temperature-transmitter-uh3jsoynacgcqh0wcsujgpyu-3-0.jpg

SkyScan 86709... | Answered on Apr 06, 2016


Simple, the instructions state that when changing the batteries on the outside temp. sensor, you must also change the batteries on the main clock unit. I had same problem when I changed the sensor batteries until I pulled the batteries from the clock and it reset fine. ( Sensor batteries first, then clock batteries. ) The clock will reset to atomic time overnight so don't worry if it doesn't read correctly at first.

SkyScan 86709... | Answered on Nov 04, 2015


I don't know about your atomic sync problem. But here is how you can set the time zone:

Push the Time button once. This will change the Month/Day window to Alarm 1. Push the up button until the desired time zone is reached. Push the Time button twice more to return back to Month/Day display.

SkyScan 86709... | Answered on Aug 15, 2015


Depending on which country you are in (the UK won't reset for a couple of weeks yet), your clock will automatically reset when it receives the adjusted time signal. If your clock is not receiving the signal, try moving it near a window and away from any electrical interference, or it is possible that your battery is getting low and has not got enough power to receive the signal.

SkyScan 86709... | Answered on Mar 09, 2015


Try temporarily locating it in a different location until it picks up a signal, usually around a window.

SkyScan 86709... | Answered on Mar 04, 2015


There should be a button labeled "C/F" to change the temperature. I don't own that brand, so I'm not sure if it's on the transmitter or on the receiver unit. Here is a link to the owners manual:

Model 86709 SkyScan Atomic Clocks

SkyScan 86709... | Answered on Oct 28, 2014

Not finding what you are looking for?
SkyScan 86709 Atomic Wall Clock Logo

269 questions posted

Ask a Question

Usually answered in minutes!

Top SkyScan Home Experts

The Knight
The Knight

Level 3 Expert

76100 Answers

...

Level 2 Expert

93 Answers

Dave Robertson

Level 1 Expert

36 Answers

Are you a SkyScan Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

SkyScan Home

  • SkyScan Home

Most Popular Question

temperature transmitter

  • Home
Loading...