20 Most Recent
Questions & Answers
Kyocera Mita 1635 Copier Printing Very Light Copies
Is one side lighter then the other side of the copy? Meaning uneven copy darkness? If so, I believe the problem is that one or both sides of the drum cartridge and the developer are not connected correctly. The two parts need to be close togather to make a nice dark copy. This model has a very wierd drum unit and has a defect that one or both side of the drum unit locking tabs break and you get very light or blank copies. It's some what coastly to replace the whole unit... That would be a worse case.... If it is just on one side you might be able to push on the cover on the side that is light. If the copies come out better. One side is broken..I would fold up some paper and make a wedge to push the catridges closer. Good Luck
on Apr 09, 2018
this is a fuser error. go into service mode( in the copier standby press 10871087 on the keypad) and go to u163 fuser error reset. If this does not work you might have to consult a service centre.
on Jul 27, 2016
How to add powder?
Don't Worry, It's simple ! You Just have to do is:
1)Buy a toner Bottle, its dust and be careful with it.
2) Pull out the toner Cartridge (You know where it is?)
3) There is a small cover with a screws , open it and remove all dust inside.
4) Fill with new ink and screw up the cover,
5) put cartridge back on printer and start.
Enjoy ! write back if any problems.
on Jun 30, 2014
Not finding what you are looking for?