20 Most Recent Brother HL 1440 Laser Printer Questions & Answers


the first thing to check on the brother is the corona wire strip, its the blue slider on the drum cartridge, it should be locked to the side if it is not it will cause such a line

Brother HL 1440... | Answered on Aug 23, 2019


I recieved a new printer for Christmas, therefore do not need my old brother. Thanks for your response.

Brother HL 1440... | Answered on Jul 24, 2019


If you need brother printer tech support usa, then dial brother printers support phone number 1866-877-0191 anytime. For More Visit Us Here: https://goo.gl/73VrU3

slide5-ymukdlto0iojz4nd3se3t5yk-4-0.jpg

Brother HL 1440... | Answered on Apr 03, 2019


For sure u can increase the darkness and there are settings to increase but u need to browse through the menu to locate the darkness increasing options. The mannual should definitely help.

Thanks

Brother HL 1440... | Answered on Feb 16, 2018


Hello,

You must reset the drum counter. Check the link where you find how to reset the drum counter http://support.brother.com/g/b/faqend.aspx?c=us_ot&lang=en&prod=hl2280dw_us&faqid=faq00002837_000

Best wishes !

Brother HL 1440... | Answered on Jan 11, 2018


depends on what alarm is on for ? if its on for say ? out of paper or out of ink then no its not going to print , even if it really has paper and ink , but it thinks it is out it still wont try , paper out switches in the tray do get bent/broken and some mfg wont allow u to use non mfg ink/toner it just gives a fault

Brother HL 1440... | Answered on Aug 25, 2016


Check the back of the printer. Open up the back door. There is a barely visible 2nd door which you need to open. Check to see if there is a paper jam behind this 2nd door. Often this is the problem and clearing this back paper jam will clear the red alarm light.

Brother HL 1440... | Answered on Nov 06, 2015


To print card stock you must us the manual slot in the front of the printer and feed one at a time. Also open the back flap door so the card stock can exit out the back instead of trying to bend around for the try. That will give you the staight paper path that your thick stock needs.

Brother HL 1440... | Answered on Sep 13, 2015


http://download.brother.com/welcome/doc002127/ZLe_UG_eng.pdf
The manual will tell you that when the Drum light is on, that indicates Drum Life near end. Prepare to purchase a new drum very soon. I have added the link for the manual because it has the error codes listed. Good luck and make sure you read the pages on Replacing Drum before you begin.

Brother HL 1440... | Answered on Mar 01, 2015


You can set the Toner Save setting in the printer properties tab of your printer in the Windows or MAC environment. Your user manual does show where they are located. http://download.brother.com/welcome/doc002127/ZLe_UG_eng.pdf You can try this link to download the user manual from the Brother's website. It is a free PDF download.

Brother HL 1440... | Answered on Mar 01, 2015


remove drum assy. and remove toner unit off drum then blow out the drum only. This should clear problem.

Brother HL 1440... | Answered on Jan 06, 2015


you might try this:

Brother HL 1440... | Answered on Dec 30, 2014


The drum unit needs to be replaced as it has reached maximum prints for the drum.
The drum unit is the carriage part that the toner unit sits in before it is put in the machine.

Brother HL 1440... | Answered on Aug 31, 2014


Three Horizontal lines indicates a 'Light Burnt Drum'. The drum units are light sensitive. If they are left in the light too long they will be affected and it will show as black horizontal bars. The number of bars really depends on the circumference of the drum some are 2 some are 3 some can be 5 etc.

Solving this you can only replace the drum unit. Check with your local remanufacturing outlet to source a replacement drum unit at a price WAY better than buying new.

Brother HL 1440... | Answered on Aug 20, 2014


sounds you have a noisy scanner ... try disassembling the laser unit and clean the mirror bearing and the axle
but don't expect too much from it ... often is a waste of time....

Brother HL 1440... | Answered on Jul 21, 2014

Not finding what you are looking for?
Brother HL 1440 Laser Printer Logo

553 questions posted

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

James Cagle
James Cagle

Level 2 Expert

481 Answers

Jim Keysor

Level 2 Expert

331 Answers

ctnozil

Level 2 Expert

270 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

HL Brother

  • HL Brother

Most Popular Question

printer stopped printing in

  • Office Equipment & Supplies
Loading...