20 Most Recent Xerox Phaser® 8550, 8560, 8560MFP Extended Capacity Maintenance Kit, 30,000 Yield, Part Number 108R0... Maintenance / Upgrade Kit Questions & Answers


You will probably have to replace the ink loader

Xerox Phaser®... | Answered on Jan 11, 2015


13,266.44 The Printhead reservoir heater took too long to reach setpoint temp.

Initial Actions:
Check that all system grounds are secured
Check the ambient room temperature
Check the fan operation and vents
If the problem persists, and you are trained on servicing this printer, then you can test the Printhead Reservoir temperature in the Service Diagnostics Reservoir Temperature test. It is either the Printhead itself or the wiring from the Printhead to its Electronics Module. This can be a very costly repair both in parts and labor.

Xerox Phaser®... | Answered on Dec 04, 2014


Your Administrator Guide book should have these instructions listed for you. It should be on the CD's that came with the printer.

If you have lost/misplaced them, you can download the guides from the Xerox.com website.
The steps below are what I did from my laptop as a Repair Technician:
1. Connect a crossover cable between the PC and system. To print an Event Log or Runtime Log:
2. Verify the system is Ready.
3. Use the system's control panel to enable AutoIP:
a. Select the system Setup menu.
b. Select the Connection Setup menu.
c. Select the Network Setup menu. 5. The page should now print.
d. Select the TCP/IP Setup menu.
e. Set AutoIP to On.
f. Exit the menu so the system is Ready.
4.
NOTE: To print the Connection Setup or Configuration page, select the system Setup
menu.
Reset the system to cause AutoIP to assign a new IP address (cycle power or select
Restart system from the Shutdown menu).
5. After the system's IP address is set, test communication by sending the "PING" com-
mand.
6. If the test fails, install a different cable and retest.

Xerox Phaser®... | Answered on Dec 04, 2014


19,003.48: Scale and offset error is too large. The voltages measured have more than a 20% error from their expected values. Something is wrong with the Electronics Module or the Wave Amplifier.
To prevent these discharges, a Grounding Clip (P/N 650442700) was added between the Y-Axis Motor mount and the Pick Clutch. Check that this clip is installed and contacts the metallic portion of the Pick Clutch.
Note
The Grounding Clip is factory installed in later versions of 8500/8550
models and in all 8560 models.

Xerox Phaser®... | Answered on Oct 21, 2014


This should be in the advanced tab in printing properties.

I’m happy to help further over the phone at https://www.6ya.com/expert/eric_7148ad2a373711a3

Xerox Phaser®... | Answered on Oct 16, 2013


I would try to download a new driver from the Xerox website and set that one to default.

I’m happy to help further over the phone at https://www.6ya.com/expert/eric_7148ad2a373711a3

Xerox Phaser®... | Answered on Oct 16, 2013


Warning to FixYa readers -DO NOT CALL THE FAKE TECH SUPPORT NUMBERS POSTED ALL OVER THIS SITE. These phony support numbers send you to criminal call centers where they will install malware, steal ID and/or extort money from you . Please only ever use the support contacts from the official company website {edited by Expert}

Xerox Office... | Answered on Nov 07, 2019

Not finding what you are looking for?
Xerox Phaser® 8550, 8560, 8560MFP Extended Capacity Maintenance Kit, 30,000 Yield, Part Number 108R0... Maintenance / Upgrade Kit Logo

9 questions posted

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Xerox Office Equipment & Supplies

  • Xerox Office Equipment & Supplies

Most Popular Question

error code 09 037 45 1010814 mean

  • Office Equipment & Supplies
Loading...