20 Most Recent Ademco Honeywell Ademco 944TSP-WH 3/4" Recessed Contact with Terminals and 3/8" Magnet (White) Questions & Answers


It has been my experience that open ckt on keypad usually means that there is a problem with the wires or the connection to the keypad or control panel. if that is ok then it's the keypad or the control panel. good luck.

Ademco Honeywell... | Answered on Apr 22, 2016


it's a dry contact there is no positive and negitive, it doesn't matter which wire goes which terminal

Ademco Honeywell... | Answered on Jan 06, 2014


Best bet would be to try and contact the prior owner and ask for it! Should have left such instructions for you as part of the sale/exchange. Just try asking if it's possible to do so.

Ademco Home... | Answered on Oct 09, 2019


learn the two into the Code Encryptor receiver by pressing and releasing the black button on the receiver. The red light on the receiver should come on. press and release the closed padlock button 3 times, the red light on the receiver should go off

Ademco Home... | Answered on Oct 24, 2018


Within 30 seconds of power up press *and # simultaneously. Display should say 20, if you press *20 1234 then *99 to exit programming. Your system should be disarmed and your install code should now be 1234. You can then use this code to change the master code.

Ademco Home... | Answered on Dec 08, 2017


You will need to add an Alarmnet wireless communicator device and subscribe to Total connect to interact with a smart phone.

Ademco Home... | Answered on Jul 03, 2017


multiple low battery ones in sequence , mean a remote low battery. There is usually only one reporting zone on the remote (panic). That would be why only one zone shows alarm.

Ademco Home... | Answered on Jun 08, 2017


It should (If installed correctly) be hard wired to a fused unswitched outlet fairly local to the control panel, if that is the case remove the fuse and then the wire to the control panel.

If not you may find it is wired directly to your fuse box, a wall socket or even a ceiling rose. an electrician will easily be able to trace it's source.
An indication as to where it is wired can be obtained by switching/pulling each fuse/mcb in turn untill the control panel powers down.

Ademco Home... | Answered on Feb 24, 2017

Not finding what you are looking for?
Ademco Honeywell Ademco 944TSP-WH 3/4" Recessed Contact with Terminals and 3/8" Magnet (White) Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Ademco Home Security Experts

Vincent Migliore
Vincent Migliore

Level 1 Expert

36 Answers

Roy McCracken

Level 2 Expert

59 Answers

oooga boooga
oooga boooga

Level 1 Expert

8 Answers

Are you an Ademco Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Ademco Home Security

  • Ademco Home Security

Most Popular Question

vista 40 system touch pad screen says

  • Home Security
Loading...