20 Most Recent Canon NP 7130 Black and White Copier Questions & Answers


Hello,

Enter in service mode and do an cartridge adjustment. Maybe the toner is not uniformly distributed in cartridge. Also you can search on internet for service manual, this may help you a lot.

All the best !

Canon NP 7130... | Answered on Dec 03, 2017


Clean the rollers to stop miss feed and jamb.

Canon NP 7130... | Answered on Aug 09, 2016


urflower, try blowing unit out with compressed air.

Canon NP 7130... | Answered on Aug 09, 2016


Henry, try blowing it all out with compressed air to clear jamb.

Canon NP 7130... | Answered on Aug 09, 2016


Try removing the developer and reseat it.

Canon NP 7130... | Answered on Dec 16, 2015


I found a service manual for this model. If still need it let me know.

Canon NP 7130... | Answered on Nov 25, 2014


If its giving blank copies there was a ploblem with the laser shutter on these. If so it needs to be taken to authorized Canon repair facility for repair. Maybe still under warranty.

Canon NP 7130... | Answered on Sep 09, 2014


Try with WD 40. Roller must be hot

Canon NP 7130... | Answered on Sep 07, 2014


check cartridge setting how-
check all spring on correct place
check ITR spring touch point
check printer to cartridge touch point

Canon NP 7130... | Answered on Apr 01, 2014


Could be the drum or the fuser causing your problem. To replace drum you need to open the machine by hitting the gray release latch on eft ide of machine to clamshell it open. Inside you will see th toner cartridge/ dv unit on the far right and immediately to the eft of that is the drum unit. You need to release the dv unit by turning a lever before removing the drum unit. Should probably call a tech to do this for you so you dont scratch or damage the drum. Drum life on that model is about 30,000 prints. Whats the meter reading on that copier?

Canon NP 7130... | Answered on Jul 01, 2013


E261
0000 The intervals of zero-cross signals deviate from the tolerance range while
the fixing heater is supplied with power.

Main cause The wiring is faulty (short circuit, open circuit). The main power supply
PCB is faulty. The DC controller PCB is faulty.

Making Corrections
1. Connectors
Are the connector J205 on the main power supply PCB and the connector
J308B on the DC controller PCB securely connected? (zero-cross signal:
J205-7 <-> J308B-1)
NO: Connect the connectors securely.

2. Main power supply PCB, Main controller PCB
Try replacing the main power supply PCB. Is the problem corrected?
YES: End.
NO: Replace the DC controller PCB.

Canon NP 7130... | Answered on Apr 29, 2013


Verify and clean the paper feed rollers and the paper fee drive mechanism.

Canon NP 7130... | Answered on Feb 17, 2013

Not finding what you are looking for?
Canon NP 7130 Black and White Copier Logo

136 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

old marine
old marine

Level 3 Expert

2256 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Canon Office Equipment & Supplies

  • Canon Office Equipment & Supplies

Most Popular Question

doesn 39 t feed paper shows p

  • Office Equipment & Supplies
Loading...