20 Most Recent Canon IMAGERUNNER 6570 Copier Questions & Answers


hi this is srinivas
sir
canon 6570 when machine is switch ON error E000004-0103 and sometimes E000004-010 appears , what is the reason?pls giv me a solution.
thank u

Canon... | Answered on Dec 15, 2018


Its on the rear bottom right, I believe there is two screws, remove the panel and take out the bottle and empty it. After replacing the waste toner case or removing the waste toner from the case, clear the toner counter in service mode as follows:

To get into service mode, hit additional functions[*] 2&8 follow by additional functions[*] again. [Select [COPIER> Counter> MISC> WST-TNR], press "C" (Clear key) to clear the counter, and turn the power OFF/ON.

You can also change the detection level as follows:

The waste toner detection timing is determined by the total page counts specified in service mode below:

1. Page counts until the warning message is indicated
2. Page counts between the warning message and E013 indication
Field Remedy

Follow the steps below if you want to change these page counts:
1. Page counts until the warning message is indicated
In service mode [COPIER> Adjust> MISC> WT-FL-LM], select any number from "0" through "4".
0: 80,000 / 1: 140,000 / 2: 210,000 (default) / 3: 320,000 / 4: 460,000

2. Page counts between the warning message and E013 indication
In service mode [COPIER> Adjust> MISC> WT-ER-LV], select any number from "0" though "3".
0: 1 / 1: 20,000 / 2: 40,000 (default) / 3: 60,000

Canon... | Answered on Oct 10, 2017


sir
canon 6570 error code E000121-0001

Canon... | Answered on Sep 03, 2017


how to solve this problem for e 121..even i try change the fan ,dc con ,power supply board,reader controlled board and main con also same...ps help

Canon... | Answered on Apr 03, 2017


1-the scanning lamp is not coming on
2-seperation is not working properly
3-the HVT for the seperation is not working

Canon... | Answered on Aug 15, 2016


Additional Function>Communication Settings>TX Settings on left>Edit Standard Send Settings>File Format>Select PDF or Tiff>OK>Done>Done>Done

Canon... | Answered on Oct 09, 2015


A E00100 means you have a laser problem. You may have a bad laser? Also, I would make sure the cover for the Primary charge is on correctly. There is a lever that gets pushed in to turn the laser "ON"

Canon... | Answered on Jun 01, 2015


code for changing LTR to A4
*28*
copier
option
then goto CST
change reading from 18 to 6 in both

it done

Canon... | Answered on Jul 23, 2014


check the pre-transfer corona assembly, there's some problem with the shutter

Canon... | Answered on Jun 23, 2014


that was feeding motor problem, in the motor chek the fuse or replace the motor

Canon... | Answered on Jun 11, 2014


At power-on, the connection of the
developing hopper toner sensor is not
detected.

Canon... | Answered on May 03, 2014

Not finding what you are looking for?
Office Equipment & Supplies Logo

214 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

old marine
old marine

Level 3 Expert

2250 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Canon Office Equipment & Supplies

  • Canon Office Equipment & Supplies

Most Popular Question

get code e000020 02b1 das anybody know

  • Office Equipment & Supplies
Loading...