20 Most Recent Canon ImageRunner 3320N Copier Questions & Answers


take out a internal report on A4 .if it ok then the problem is from optics and u have to clean it .if the report is also faded then the laser unit is dirty so u have to take it out if ur a rep and clean it with simple white cloth for dust on mirrors

Canon... | Answered on Jul 31, 2011


it may be because of dirty laser unit or the iptics.try cleaning the optics and then the fuser.charging can also be a problem .check DP unit for toner layer .

Canon... | Answered on Jul 30, 2011


THIS IS A HIGH VOLTAGE ERROR.FOR RECTIFYING THIS FIRST BRING BACK THE VALUES OF DEVELOP IN SERVICE MODE BACK TO NORMAL.CLEAN THE DRUM UNIT.

Canon... | Answered on Jul 22, 2011


YOUR MACHINE HARDIDSK HAS CRASHED .TRY PRESSING 1 & 9 AND THEN POWER ON THE MACHINE WITH 1&9 PRESSED .iT WILL DE FRAGMENT THE HARD DRIVE BUT EVENTUALLY U HAVE A TO GET A NEW ONE OTHERWISE THE ERROR WILL COME AGAIN

Canon... | Answered on May 23, 2011


FUSER UNIT STUCKED REMOVE & CLEAN IT OR FIXING MOTOR REPLACED

Canon... | Answered on May 12, 2011


Do you have the install disk? If not, you can go to hp.com. Drivers and downloads. If there are any updates for windows 7, they'll be there. if you have already done this, then answer me back exactly what happens.

Let me know

Canon... | Answered on Jan 11, 2011


Hey!On the panel should be a button with a (123)on it!Press that and it will give you the meter reading!!Good Luck!

Canon... | Answered on Nov 12, 2010


it is in the copier settings. one is actually set up to automaticly do doublesided copies as a default. while the other one is only set up to do singlesided copies

first while on the main copy screen change the setting how you want the copier setup ..... double sided printing, black and white, or how ever you want your defaults to be set up

then you will need to goto the additional functions button and under copy settings you will need scroll down to the second page.

there you will want to hit the standard setting button then click the store button, then click yes... now it will default to the double sided copies.....


hopefully this will fix the problem if not get back to me

Canon... | Answered on Jun 18, 2010


you need to place new toner on top of toner unit, press it until cliks and you pull the plastick "track" out do not tear it.

Canon... | Answered on May 14, 2010


try to set the toner a few times more, this error code is developer trouble.So it could be that toner isnt recognized, not properly inserted, or you have some tape leftovers on toner, or you have broken developer unit, or ...

Canon... | Answered on May 06, 2010


you push in on the front top where the stop strip was and it will pop up unless you have yet to add toner to the developing hoppper then you would fallow the directions on the toner box

Canon... | Answered on Mar 24, 2010


Try canonusa.com and look under image runners for your model. Hope this helps.

Canon... | Answered on Dec 18, 2009


replace the black drum

Canon... | Answered on Oct 12, 2009

Not finding what you are looking for?
Office Equipment & Supplies Logo

35 questions posted

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

old marine
old marine

Level 3 Expert

2250 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Canon Office Equipment & Supplies

  • Canon Office Equipment & Supplies

Most Popular Question

canon 3320 machine error code 000064

  • Office Equipment & Supplies
Loading...