Toshiba 36A50 36" TV - Answered Questions & Fixed issues


It is the fault with some components related with its horizontal scan output section circuit. Just check the circuit part; and check the components I've marked in red here by its horizontal scan output circuit. Beware; you're going to touch the most dangerous part of its circuit. Keep it in mind always.

24780559-dmive0z32bcpzrsafcaw1enm-4-0.jpg If you wish to see the circuit diagram in full; visit
http://schematicscom.blogspot.com/

Toshiba 36A50... | Answered on Aug 18, 2016 | 85 views


038,017,082,053,091 are the codes to check. If you wish to get more details, check this site. Pull up previous posts there. Setup code list and setup proceedings to many popular brand remote controls are given. Three digit, four digit, five digits and two-digit code list are there. Check the site with patience. Surely you'll get a solution to your problem. Search the site by 'Timeslide' option. It will make search easy. Or, type in the brand name to your device into its search box, and press "Enter"

Toshiba 36A50... | Answered on Apr 08, 2013 | 33 views


Ok, The vertical Ic is IC301 Ta8427K And Capacitors around IC chroma 2.2 uf 50 volts. You will see small red capacitor ( with C302....4 or 5 ) reference. Replaced others capacitors on vertical section 220 uf 35 V or 100uf 35V. I hope this can help you. Or if do you have any picture chasis, send to me and I will show you where are the problem., Thank you

Toshiba 36A50... | Answered on Aug 04, 2012 | 601 views


tv turns its self off i unplug it plug it back in it will flash on not showing picture it u can her it flash on and right back of some times it will not flash in back of tv and i can hit power it will flash and go off every now and then it will come on show picture after being unplugged and plugged back but then shuts off

Toshiba 36A50... | Answered on Jul 22, 2012 | 54 views


hi,
Hi check is there is any dry soldering in the vertical scanning stage or in the power supply stage. of your tv. If the soldering of the vertical ic is dry( improper spldering contact coused by years of use) then this can happen.Thats why it disappears some time when there is a proper contact comes. You can confirm is it dry soldering by shaking the tv while its working. If the line comes and go off then there is dry soldering in the vertical scanning section. To rectify this you have to oppen your tv And have to resolder the points in the vertical section. Have added the picture, how a dry soldering point looks.



ajin_g_53.jpg
ok

Toshiba 36A50... | Answered on Aug 22, 2011 | 79 views


Try website like Remotes.com to buy the tv original remote to used.U will used the tv original remote to turn to channel 3 with ease.After u have the tv original remote push the menu button go into Closed Captioning functions turn off like TEXT 1,2,3...The big black box will not appear on the screen again.Tv used it manually control buttons up and down channels trying to get to channel 3.U will never get it to tv channel 3 because tv channel 3 was not save on it memory list of on the tv turn manually channels buttons programming memory.Tv have a manual button said MEMU button on it tv front bazel frame?Yes.Might could used the Menu button on the tv frame to get in to turn off TEXT 1,2,3...to stop the big black box to show up on the tv screen again.

Toshiba 36A50... | Answered on Aug 17, 2011 | 390 views


Maybe the problem of your television is loose PCB connection, ethier it is cold solder.It is need to resolder first then if did not work.It is time to replace a leak capacitor at vertical section of the crt board.

Toshiba 36A50... | Answered on Jul 04, 2011 | 24 views


Yes...this TV may be repaired. The line you describe is in the center and is horizontal across the TV. You will need to resolder the vertical IC pins. This vertical IC is mounted on a large heatsink. Under the board you will see there are 5 or 7 pins that will have rings around them. Resolder these. And you should replace two or three capacitors that are next to this IC. A bad cap will overheat an IC and separate the solder grounds. If you can find my expertise page on this website, you will see the repair in more detail. Thanks for asking and show a few hands of support.

Toshiba 36A50... | Answered on Mar 04, 2011 | 420 views


Sure I can. If you can just tell me what the problem is, I will be glad to help you :)

Toshiba 36A50... | Answered on Nov 16, 2010 | 17 views


The only common problem would be on the Toshiba Remote. Make sure you have the switch on the remote set to "TV' and not Audio, or Video. Beyond that, if you have a digital camera or a cell phone with a camera with a viewing display, point the remote at the camera and push any button. If it is sending IR, you will see the flashing from the remote on your camera/phone display.That will just confirm the remote is sending signals. The only other possibility is that your IR receiver on the TV is bad, This happens, but it's not very common. Hope this helps

Toshiba 36A50... | Answered on Sep 30, 2010 | 149 views


i had tht EXACT same tv in white and i used to play game systems on it. eventually i got bad joo joo and it stopped working :/

Toshiba 36A50... | Answered on Jun 12, 2010 | 111 views


According to timewarnercable.com, the codes for a toshiba tv are 074, 168, or 170. If none of these codes work, I suggest you try the code search function. To do this, follow the steps listed below. 1. Turn on the tv 2. Press "select" and "tv" together until the LED blinks twice. 3. Using the keypad on the remote, type in the digits 9-9-1. This will open the "code library." The LED should blink twice. 4. Press "power." 5. Press "channel up" key repeatedly until the tv switches off. 6. When the tv turns off, press "tv" on the remote to lock in the code. Your remote should now be programed to your tv. I hope this helps, and good luck! Sincerely, Der Strom

Toshiba 36A50... | Answered on Apr 27, 2010 | 464 views


try to replace filter capacitor from power supply and in horizontal section.

Toshiba 36A50... | Answered on Mar 29, 2010 | 278 views


The circuit boards need to be re soldered sounds like dry solder joint which breaks connection not a big job and shouldn't take to long.

Toshiba 36A50... | Answered on Jan 08, 2010 | 220 views


wash them

Toshiba 36A50... | Answered on Dec 12, 2009 | 113 views


Go to the time warner website, they should have accessory section there page, and there you find codes.

Toshiba 36A50... | Answered on Nov 20, 2009 | 179 views



This is an easy repair if you've ever soldered and would not be too costly for a repair shop to do it for you. The problem is a bad Vertical Output IC (usually mounted on an aluminum heat sink with the part on it labeled LA78?? or AN?? ) and 1 or 2 bad capacitors. Some times you can even fix the problem by re-soldering the contacts of the IC- To find the IC follow the 4 wires that come from the Yoke (which is a contained coil of wires slipped over the neck of the picture tube(s)) back to the board. 2 of the wires go to the horizontal o/p and 2 to the Vertical o/p the thinner gauge wires are for the vertical. Be sure to vote/rate me if this helped Thanks!

Toshiba 36A50... | Answered on Nov 06, 2009 | 207 views


bad Vertical Output IC (usually mounted on an aluminum heat sink with the part on it labeled LA78?? or AN?? ) and 1 or 2 bad capacitors. To find the IC follow the 4 wires that come from the Yoke (which is a contained coil of wires slipped over the neck of the picture tube(s)) back to the board. 2 of the wires go to the horizontal o/p and 2 to the Vertical o/p circuit area. the thinner gauge wires are for the vertical.

Toshiba 36A50... | Answered on Nov 06, 2009 | 199 views


It sounds like the set has been put into the text mode. This setting is in the CC or closed caption section of the menu. You should be able to access this with the menu button on the front of the set. Turn it off when you get to that section of the menu. This black box is where the "text" for CC would normally be written if your cable service provided it. Thanks

Toshiba 36A50... | Answered on Nov 01, 2009 | 82 views


this is a dry canaction problum in pcb do not slap tv.
* cont. tv tech. nr. at your home solve this problum in fuw mint. it is not expanciv but. if you slap tv then posibal spear damage in inside tv.set.and he is very expanciv.

Toshiba 36A50... | Answered on Oct 31, 2009 | 135 views

Not finding what you are looking for?
Toshiba 36A50 36" TV Logo

104 questions posted

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76099 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...