20 Most Recent
Questions & Answers
Need to turn it off to tow vehicle behind motor
Usually, On a pioneer stereo, the button that you press to change
sources (Tuner, CD, etc etc).. if you hold it in, the unit will turn
Look for a button that says Power, or PWR near it with a
Square and little line coming from the square, that means you need to
hold that button to perform that function. Hope this helps.
on May 09, 2010
The face opens up but there it doesnt light up or play music
You need the ribbon cable kit that pioneer sels to repair it. Kit is sometimes on ebay for around 25.00.
They usually don't include the second ribbon cable and you DO need that too.
You can go to
Monday - Friday: 7:00am - 4:30pm PST
Closed on Saturdays, Sundays and major holidays.
tell them you want the kit that comes with a new bezel and the left hand (smaller) ribbon cable also.
They should be able to look up part #'s and give you a price right there.
You will then need to have them installed or install them yourself. It's not impossible, bit it's not that easy either. If you are good with small mechanisms, and delicate things, you will be ok. I think the kit even comes with instructions.
You will need to remove the unit from the car.
REplacing both the cables will bring your unit back to life. It retailed for over 600$ in it's day. A nice radio for sure. Kinda like a transformer. ;-0
on Jun 13, 2009
I cant find the fuse
hi there should be a fuse in the power loom. there are no fuses on the unit itself. sounds like you have a faulty unit
on Nov 25, 2008
For most Pioneer single CD players, you can set the clock using the following steps:
1.Press and hold the SOURCE button until the unit shuts off.
2.Press and hold SOURCE again until the clock appears. With some models you will press and hold the FUNCTION or AUDIO button instead of the SOURCE button.
3.Press the left or right arrow to select the segment of time you wish to adjust.
4.Press the up or down arrows to increase or decrease the numbers in the blinking segment.
5.Once the clock is set correctly, press the SOURCE button to exit.
on Feb 20, 2008
Unit opens and closes on its own
I think I got the second half of the solution for this problem. Please look at post "Unit powers down when motorized face opens" for a solution. Seems like we need to buy the ribbon that connects to the face plate to fix this problem.
on Feb 08, 2008
the flexible pcb in the unit is broken and you will need to replace it, the pioneer part number for the replacement is CNP 6869 this is a replacement kit
on Dec 07, 2007
Do you'll sale part's for a pioneer stereo model RX-1220
Hi Michael Baldwin; here in Fixya, no parts of any kind are sold, we simply suggest solutions
In your case, I suggest you, search by model through the Internet, the part or pieces you need or contact an Official Pioneer Service
I hope you can find what you are looking for
Regards Franco Dosil
Hola Michael Baldwin; ac? en Fixya, no se venden piezas de ning?n tipo, simplemente sugerimos soluciones
En tu caso, te sugiero, busques por modelo a trav?s de Internet, la o las piezas que necesites o contactate con un Service Oficial de Pioneer
Espero puedas encontrar lo que buscas
Saludos Franco Dosil
2 days ago
Not finding what you are looking for?