20 Most Recent Hisense Refurbished 50"" 1080p LED-LCD HDTV -50K23DG Questions & Answers


Refer its user manual for details.

Hisense... | Answered on May 13, 2019


LCD & LED TV Repair - No Image & Blank Black ... - YouTube

? 5:56
https://www.youtube.com/watch?v=xUzCLgoSPGM
Sep 15, 2014 - Uploaded by ShopJimmy.com
LED & LCD TV How to Diagnose Symptom of No Image on the Screen CLICK HERE to BUY ... I have an LG ...

Hisense 50K360G has audio no video will not turn on logo ...

? 1:48
https://www.youtube.com/watch?v=xI3MpZukKm0
Nov 20, 2013 - Uploaded by After Hours Tv & Pc repair
Find the correct TV part for your TV and more at ShopJimmy.com Click Here: http://bit.ly/ShopJimmy6 Want to ...

All comments on LCD & LED TV Repair - No Image & Blank ...

https://www.youtube.com/all_comments?v=xUzCLgoSPGM
I have sound and picture but no backlight. .... how do you replace the back lighting on a led lg tv? ... I have a 42 inch LED LCD combo DVD TV made by RCA.

My LED TV has sound, but no picture. - Tom's Guide

www.tomsguide.com/answers/id-2771720/led-sound-picture.html
Dec 28, 2015 - Hi, I have an RCA 32" LED 1080p TV that is less than 2 years old, and it has already lost the video. I can hear sound, and I can see lights in the ...

53 HISENSE complaints and reviews @ Pixxed Consumer

hisense.pissedconsumer.com/



Hisense... | Answered on Dec 02, 2017


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Hisense... | Answered on Sep 28, 2016


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.

Hisense... | Answered on Aug 22, 2016


Hi check the links hope it will help you
If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience
http://electro-medical.blogspot.com/

LCD LED TV Repair No Image Blank Black Screen Flashlight Test How to Fix...

Hisense... | Answered on Mar 22, 2016


Hi, The part number for this inverter is: 167210, RSAG7.820.5463,
it will be printed on the board somewhere perhaps on a sticky label, have a good search around all the boards if you are unfamiliar with the set. If its any help start with the smaller Boards first, the largest will be Main AV and the Power Supply

Hisense... | Answered on Jan 13, 2016


Hi Michael
Your certainly doing all the right things. I wish more people on this site would give a great description like yours.
OK, so Process of Elimination.
An AC Multimeter would prove useful here.
Assuming your fairly technical and are aware of electric shocks.
Use the meter on AC scale to check for 110 or 240v AC inside your TV power supply section.
Does it get to the board? Does it get to the Switch Mode Power Supply?
Switch Mode power Supplies can be powered up by a normal AC type switch (ac wires to physical switch) or a Logic type switch. (Like on a computer Keyboard) This triggers the Switch Mode to turn on. Usually you get a high frequency zip sound.
Is the switch mode supply open on the PCB or is it in a Metal Enclosure? (perhaps has a separate fuse inside) the Electrolytic capacitors inside here are in a harsh environment so this is where they leak or bulge.
If the Switch Mode Supply doesn't come to life then you have the problem.
The other side of the Switch Mode Supply is lower DC voltages. Perhaps 12v or 5v. Use the multimeter to check.
A logic type switch usually stores a voltage in a capacitor on the secondary low voltage side of the Power Sup. When the logic switch discharges the cap it fires up the SM Power Supply. This is how computers boot up. So look for bad cams on low voltage side.
See where wires come in from switch to Power Supply.
Good Luck

Hisense... | Answered on Jul 03, 2015


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
https://homenol.blogspot.com/
https://remotesearch.blogspot.com/
https://electronicshelponline.blogspot.com/
https://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; [Exclude the model number], in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. See the site by a desktop. Mobile view has no search box. If you are viewing it by your mobile, see it in webview]

Hisense... | Answered Yesterday


$85/hr provide by Google, I am making a good salary from home $6580-$7065/week , which is amazing, under a year ago I was jobless in a horrible economy. I thank God every day I was blessed with these instructions and now it's my duty to pay it forward and share it with Everyone,
Here is I started,,,,,,,,.w­­­w­­­w­­­.­­­t­­­i­­­p­­­s­­­.­­­c­­­a­­­s­­­h­­­61­­­.­­­c­­­o­­­m

Hisense... | Answered Yesterday


HiSense would be a possible source.

Hisense... | Answered 2 days ago


check input or source if ok possible bad high voltage board

Hisense... | Answered 3 days ago


Write your answer...my hisense is turnin blue and red it flashes black on screen my email alfredmokgoth@gmail.com

Hisense... | Answered on Sep 12, 2019

Not finding what you are looking for?
Hisense Refurbished 50"" 1080p LED-LCD HDTV -50K23DG Logo

8 questions posted

Ask a Question

Usually answered in minutes!

Top Hisense Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76125 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Paul

Level 2 Expert

224 Answers

Are you a Hisense Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Hisense Televison & Video

  • Hisense Televison & Video

Most Popular Question

our hisense tv turning off self also

  • Televison & Video
Loading...