20 Most Recent RCA F32650 32" TV Questions & Answers


If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
http://homenol.blogspot.com/
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/
Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts. ..

RCA F32650 32"... | Answered on Mar 08, 2017


Check and replace damaged component/s at its horizontal scan output section circuit. Check the LOT (Line Output Transformer) too for damage. Replace the horizontal scan output transistor. Check the input voltage to LOT. If the voltage is absent check the feeder resistor; if any. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
Type in this key phrase " my service table today " in the search box at the top right of the display window of the home page, to get gathered some pages which has the details of practical experiences to the author of that site.

RCA F32650 32"... | Answered on Apr 29, 2016


If they are part of your plan and you are paying for them, then this is an issue you take up with your cable provider.

RCA F32650 32"... | Answered on Aug 25, 2015


If the DVR has RCA-type connectors, yellow to yellow for picture, and white to white for sound. Tune tv to line input.
If the DVR supports outputting everything on coax, use a piece of coax cable, and tune tv to channel 3.
Your coax cable from wall has to go into DVR first, then out to tv.

RCA F32650 32"... | Answered on Sep 12, 2014


To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

RCA F32650 32"... | Answered on Sep 01, 2014


If it does not have any sleep timers set then it is malfunctioning and needs to be replaced.

RCA F32650 32"... | Answered on Aug 19, 2014


Check and replace the damaged component/s at its main board. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

RCA F32650 32"... | Answered on Aug 03, 2014


bad High voltage NPN power transistor
throw out the tv - get another one at a thrift store for $20 - I have seen sony wega at this price or free on craigslist

RCA F32650 32"... | Answered on Jul 27, 2014


The TV can be restored to factory settings for different functions. There may not be a single factory setting. Refer to manual at this site

http://www.retrevo.com/support/RCA-F32650-TVs-manual/id/402ag411/t/2/

It will depend on what function you want to reset to factory setting. For example Parental lock password etc.

RCA F32650 32"... | Answered on Jun 02, 2014


Short circuited component/s at its main board. Check the horizontal scan output transistor for short. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box.
http://electronicshelponline.blogspot.com/

RCA F32650 32"... | Answered on May 15, 2014


You're discussing about its SMPS transformer at its main power supply section circuit; I assume. It it sounds [like a buzzer]; check for any loose fitting with its ferrite core.

RCA F32650 32"... | Answered on May 09, 2014


ic circuit is the problem, see TV Tech.

RCA F32650 32"... | Answered on Nov 10, 2013

Not finding what you are looking for?
RCA F32650 32" TV Logo

237 questions posted

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76143 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Cindy Wells

Level 3 Expert

6046 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

RCA Televison & Video

  • RCA Televison & Video

Most Popular Question

factory reset

  • Televison & Video
Loading...