20 Most Recent Alba DVD-108 DVD Player Questions & Answers


help me guys with alba dvd59 remote codes

Alba DVD-108 DVD... | Answered on Mar 06, 2019


Read the Manual that comes with the equipment, in detail. the answer is there.

Alba DVD-108 DVD... | Answered on Aug 01, 2017


the codes in the book are
0768 0770 0831 0881 1097 1115 1165

Alba DVD-108 DVD... | Answered on Jul 22, 2015


It depends on your connections for one thing. I did find this piece of information on the DVD player:
"One thing they do not state (in the manual) is that if you are playing it through your Scart socket to your TV. Your TV's Scart socket must be PAL60 compliant".

If they both have HDMI sockets I would get a HDMI cable and connect via that. You will also get a better picture than a scart.

If you are using a scart the connector can also become faulty either inside or a faulty pin so check that too.

Alba DVD-108 DVD... | Answered on Dec 29, 2014


9,7,3,5 in DVD mode then press 0. Worked for me!

Alba DVD-108 DVD... | Answered on Jun 03, 2011


These are the panasonic codes from the book. 2017 1990 1986 1925 1910 1909 1908 1907 1905 1762 1490 1462 1362 1011 1010 0824 0703 0632 0503 0490 hope these help

Alba DVD-108 DVD... | Answered on May 07, 2011


just change the mother board

Alba DVD-108 DVD... | Answered on Dec 27, 2010


you should use only original dvd cassettes or dvd lens might got affected so give it to service

Alba DVD-108 DVD... | Answered on Dec 25, 2010


The code depends on TWO factors... the equipment you are trying to program, and the type of remote.
Here is some useful info:
http://www.videohelp.com/dvdhacks/alba-dvd108/1310

Alba DVD-108 DVD... | Answered on Sep 26, 2010


Hi.

If something is rattling and the unit does not power up, then there is definitively an internal fault.

If there is no power at all, no lights or sign of life, then it is likely the power cord attachment to PSU board , or faulty PSU board. The rattling noise in that case can only be heard if shaking the unit, and it is cause by a part that detached from internal circuit. The part probably caused a short and consequential PSU failure.

More commonly the unit will be powering up, and you hear noise from the internal DVD drive. In that case there is either a disk stuck inside the player, or there is a mechanical failure concerning the DVD drive.

If there is a disk stuck inside the DVD, try ejecting the disk, follow instructions detailed here:DVD player system won't...

Either than that,any other internal fault that makes rattling noise can only be repaired disassembling the unit.

If the rattling noise is coming from the DVD drive, and there is no disk inside, then the DVD drive must get replaced.

If the unit is less than one year old, call the number listed on user guide to get it repaired. If the unit is not under warranty cover anymore, the repair may result more expensive than getting a new Alba or similar brand player.

Alba DVD-108 DVD... | Answered on Jan 24, 2010


remotes are really not worth trying to fix unless its a small hardware problem this sounds to me like a Shock Damage issue wich are normally very difficult i recommend you spend 5$ on a nice new Universal remote or even go buy a used one for a buck at goodwill ;)

Alba DVD-108 DVD... | Answered on Jan 04, 2010


i opened it manually after a lot of fiddling about

Alba DVD-108 DVD... | Answered on Dec 30, 2009

Not finding what you are looking for?
Alba DVD-108 DVD Player Logo

51 questions posted

Ask a Question

Usually answered in minutes!

Top Alba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76140 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

512 Answers

Ekse

Level 3 Expert

13434 Answers

Are you an Alba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Alba Televison & Video

  • Alba Televison & Video

Most Popular Question

connect tv nothing screen from dvds

  • Televison & Video
Loading...