20 Most Recent Panasonic PV-C1320 13 in. TV/VCR Combo Questions & Answers


Some of the older units in the cable band will not receive channels abover about channel 46---if this is the case nothing can be done.

Panasonic... | Answered on Jul 17, 2012


To exit the self-demo mode, with the TV on, press and hold Play/Repeat for 5 seconds (possibly a bit more). If you press and hold the button again, you will go into the demo mode. Panasonic has the manual at their support site: http://www2.panasonic.com/consumer-electronics/support/Televisions/TV-Combos/Operating-Instructions/model.PV-C1320.O . The direct link to the manual is http://service.us.panasonic.com/OPERMANPDF/PVC1320.PDF .

I hope this helps.

Cindy Wells

Panasonic... | Answered on Jun 12, 2011


Here are some Panasonic codes that Comcast lists on their website: 21062, 20035, 20162, 20225,


20614, 20616, 21035

(but the code depends on which remote you have, check Comcast's website for more info)
http://www.comcast.com/corporate/customers/customer_support/remotes.html

You can also try to manually search for the code:

Turn the TV on
Press TV or AUX
Press and hold "Setup" until TV/AUX blinks twice
Enter 9911 and press "Power" using the Comcast remote
Press "Channel Up" until device powers off
Press "Setup" to lock in that code

Please let me know if you found this helpful.

Have a great day!

Panasonic... | Answered on Mar 16, 2011


Hello
Universal remote codes for Panasonic TV/VCR combo are:-
0374 0381
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Panasonic... | Answered on Mar 04, 2011


Try website Remotes.com to buy an exact remote to the origginal.

Panasonic... | Answered on Aug 21, 2010


used converted box vedio ouptu to vcr pv-c1320 vedio input used VCR LINE...
Wach tv...

Panasonic... | Answered on Sep 17, 2009


There should be a TV/AV button located with the front control buttons, press this & it should switch over to the AV source ie. your camera input.

Panasonic... | Answered on Sep 02, 2009


Yes it can you will need a 2 or 3 prong rca jack

Panasonic... | Answered on Aug 28, 2009


You should be able to just connect a coax cable to the output of the VCR to the antenna in on the TV. Then select channel 3 on the TV.

Panasonic... | Answered on Aug 20, 2009


The only thing that you are able to program without the remote is the language, channels, and time by pressing and holding the play and FF button for five seconds until the tv turns off, turn it on again and you will get what i just mentioned...

Panasonic... | Answered on Jun 04, 2009


Here's a link to order the original Panasonic service manual for this model (PV-C1320) from a major parts distributor:

Panasonic PV-C1320 Replacement Part Service Manual

Panasonic... | Answered on Feb 05, 2009


if your are using a cable box,all of your channels will be control only on the cable box.so, what you are going to do is use the remote control of the cable box.

Panasonic... | Answered on Nov 07, 2007


go to channel 1 if there is no audio/video switch or you can use the rf mudulator

Panasonic... | Answered on Nov 07, 2007


Here's the link for the user manual if you need it; http://service.us.panasonic.com/OPERMANPDF/PVC1320.PDF Check page 39. 120vac - power on = approx 69W I wouldnt get an inverter too close to that figure, but a 200w inverter should do - just check the inverter specifications to verify if the rating is actual power output - many inverter manufacturers are a little creative with their model names etc, but the real info has to be somewhere on the box. If in doubt then the best way is to evaluate your battery system capacity and usual recharging input, and match the current drawn by an inverter to half that figure, see what power inverter size you can manage. if you buy bigger, you get more watts per dollar usually, and you may want any surplus capacity later for another item. Also running inverters up towards their maximum often will shorten their life dramatically. Hope this helps :)

Panasonic... | Answered on Jun 27, 2007


it happened to me too. the only way to fix it or take the vhs from the vcr is to open it.

Panasonic... | Answered on Jun 27, 2007

Not finding what you are looking for?
Panasonic PV-C1320 13 in. TV/VCR Combo Logo

24 questions posted

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

512 Answers

The Knight
The Knight

Level 3 Expert

76140 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Panasonic Televison & Video

  • Panasonic Televison & Video

Most Popular Question

turn off

  • Televison & Video
Loading...