20 Most Recent Kenwood KAC-9152D Car Audio Amplifier Questions & Answers


Power control wire - tells the amp to turn on, usually connected to the blue/white or blue wire when blue/white is not present on aftermarket radios. On factory systems you usually want to hook up this connector to an acc source on the car

Kenwood... | Answered on Oct 08, 2017


The manual only says the power indicator burns when the power is on.
25372094-ptmniwyvtjobac0k42nxowvq-3-0.png
I can't find anything about it also should flash. The only thing I can think of, it has detected an error, like a blown amp or a low impedance on a speaker terminal.
Here is the manual:
http://images.kenwood.eu/files/prod/29/5/KAC-9152D_9102D_8152D_8102D_(EN).pdf

Kenwood... | Answered on Jan 17, 2015


if you have a protection light that is on it means the amp is in protection mode and wont allow any power to the sub this usually happens when the sub or wiring shorts out or if there is an internal failure in the amp or if its overheating. check the wires and connections and test your sub on another amp.

Kenwood... | Answered on May 13, 2014


your ampifier is in protect mode, try to dettache the speaker and turn on it.if the green ligh on ,one of your speaker is deffective but still the red light on theres something wrong with your amp.

Kenwood... | Answered on Apr 13, 2014


the diagram is supplied with the camera.
if not, find the connectors that the camera uses to send the tv signal.
find the model number of camera and setup the power connections and route the signal cable to your tv or server or recorder.
setup the power cable and connect it to your power source.
provide more information about your setup.

Kenwood... | Answered on Nov 15, 2013


I have the Kenwood KAC-9152D Repair Owners Manual. This is my E-Mail address. canalv11@gmail.com send my a e-mail. & I will e-mail back 2 U w/the Manual ATTACHED

Kenwood... | Answered on Dec 21, 2011


Check your amp's fuse(s), it may be blown.

Kenwood... | Answered on Sep 26, 2011


make sure it's well ventilated. If there's no air flow, then there is no way of cooling down and to protect itself it will shut off. Make sure the speakers are wired correctly as per amp specs. too many subs or subs connected improperly can draw too much current and shut the amp off, but you will notice this when you turn up the volume to a certain point and the amp shuts down.

Kenwood... | Answered on Sep 26, 2011

Not finding what you are looking for?
Kenwood KAC-9152D Car Audio Amplifier Logo

Popular Tags

146 questions posted

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5013 Answers

Marvin
Marvin

Level 3 Expert

85160 Answers

Mike Duncan
Mike Duncan

Level 2 Expert

219 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kenwood Car Audio & Video

  • Kenwood Car Audio & Video

Most Popular Question

amoung many other people

  • Car Audio & Video
Loading...