20 Most Recent Kenwood KDC-C719 10-Disc CD Changer - Page 5 Questions & Answers


push and hold botton with red light at top left corner for ten second ubit should reset

Kenwood Car... | Answered on Mar 05, 2019


turb power on and push reset for 10 second

Kenwood Car... | Answered on Mar 05, 2019


best way to get you have go on kendwood site and talk to tech support

Kenwood Car... | Answered on Mar 05, 2019


disconnect all the speaker wires and power up back the unit and then press reset button at top left corner for ten second..

Kenwood Car... | Answered on Mar 05, 2019


That error is normally a shorted speaker wire but starting the car won't cause that. Possible problem could be the dimmer wire was used as a ground by mistake. Lights come on when the car starts. Another is too high of voltage. Car rests at 12 volts but is around 14 when running. Was there a plastic piece on the red or yellow wire that got cut off during the install? They have a resistor inside that keeps the voltage down.

Kenwood Car... | Answered on Mar 03, 2019


kenwood cd player pinout points-ue4hlgd00wn3h2txlnime0ky-5-0.gif
Hi, this picture resembles the harness(connecting plug) looking in from the back of the harness. The red wire goes into the A+ point. the black wire goes into the Gnd point. The yellow wire goes into the B+ point. if you not sure how to read this picture please ask the help of an installer. Cheers.

Kenwood Car... | Answered on Mar 03, 2019


YOU SHOUL CHECK YOU BATTERY AND GROUND AND REMOTE SOURCE MAKE SURE THEY ARE CONNECT PROPERLY

Kenwood Car... | Answered on Mar 02, 2019


Hi Dalitso, the sound output ic, or the ic that drives the sound to the speakers for this model is TB2931HQ. Cheers.

Kenwood Car... | Answered on Mar 02, 2019


USUALLY THERE IS NO CODE BUT IF U PURCHASE USE YOU HAVE GET CODE

OR TURN KEY AND PUSH RESET BUTTON FOR TEN SECOND THEN TURN OFF AND TRY TURN ON

Kenwood Car... | Answered on Feb 19, 2019


VIDEO CARD READER OF UNIT IS BAD YOU HAVE TO FIND A TECH SUPPORT WITH KENWOOD TO FIX

Kenwood Car... | Answered on Feb 19, 2019


UNPLUNG THE UNIT WAIT TEN SECOND THE PLUG BACK IN

Kenwood Car... | Answered on Feb 19, 2019


Contact Kenwood directly and request the wiring diagram.

Kenwood Car... | Answered on Feb 13, 2019


Going in the clock menu setting and follow the steps to set clock

Kenwood Car... | Answered on Feb 12, 2019

Not finding what you are looking for?
Kenwood KDC-C719 10-Disc CD Changer Logo

Popular Tags

6 questions posted

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5013 Answers

Marvin
Marvin

Level 3 Expert

85160 Answers

Mike Duncan
Mike Duncan

Level 2 Expert

219 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kenwood Car Audio & Video

  • Kenwood Car Audio & Video

Most Popular Question

just got car kenwood 10disc cd

  • Car Audio & Video
Loading...