Kenwood KDC-C719 10-Disc CD Changer - Answered Questions & Fixed issues

there is no reset button, the reset is to disconnect power to the unit and see if it starts up ok, you do say problem but if it is loading problem then resetting it will not fix it.

Kenwood KDC-C719... | Answered on Jun 16, 2019 | 372 views

• E-99: Changer malfunction, disc may be caught in machine or changer requires service.
Unfortunately the E99 code is not definitive. There may be a mechanical jam with the changer or a problem with the motor.

Kenwood KDC-C719... | Answered on Dec 25, 2014 | 245 views

i had this when i got one off ebay, take it apart (cover) usually 6 screws, the cartridge inserts may not be aligned inside (part cd sits in) if that is the case you need to remove it/them. it tokk me 40 mins of carefull prise and pull

Kenwood KDC-C719... | Answered on Jul 01, 2010 | 212 views

On the botton towards the right is a TINY TINY TINY sliding button.

Kenwood KDC-C719... | Answered on Oct 14, 2013 | 600 views

Hi Lisa, as you say, it is very likely that the Laser reader may be dirty or the reader's progress locked
Consult a specialized technical service
Regards Franco Dosil

Hola Lisa, por lo que comentas, es muy provable que pueda estar el lector Laser sucio o trabado el avance del lector
Consulta a un servicio tecnico especializado
Saludos Franco Dosil

Kenwood Car... | Answered 9 hours ago | 14 views

Hi Karen, you can download the manual from the internet to a USB memory and then print it or send it to print on the sheet size you like best and you would already have it on paper
I send you the link to download
Regards Franco Dosil

Hola Karen, puedes descargar el manual de internet a una memoria USB y luego lo imprimes o lo mandas a imprimir en el tama?o de hoja que mas te guste y ya lo tendrias en papel
te envio el link para que lo descargues
Saludos Franco Dosil

Kenwood Car... | Answered 9 hours ago | 14 views

Kenwood has the manual for the KDC-U346 available through the Car Electronics support page: . Enter the model number and click the search button. Click on the link to your model's support and scroll down to find the manuals. The current link to the KDC-U346 manual in English is . This manual covers several Kenwood models.

I hope this helps.

Cindy Wells

Kenwood Car... | Answered on Aug 16, 2019 | 19 views

try unpluging the unit for about five minutes then try again

Kenwood Car... | Answered on Jul 11, 2019 | 49 views

Go to and type in the model number and you will get a 100% free manual while online and also if liked you can purchase a copy for what ever price they may have for that product or you can print it all out for free to I do believe.. Hope this helped...

Kenwood Car... | Answered on Jun 29, 2019 | 23 views

According to the manual, the aux input for the mpv622 is an optional accessory. If it's installed, you select the aux input by pressing the [SRC] button. Select the AUX/AUX1 display. Then press the [DISP] button for two seconds. The selected input blinks. Press the ? or ? to change the input setting.

Kenwood Car... | Answered on Jun 24, 2019 | 49 views you can try this site and follow the instruction this may help u

Kenwood Car... | Answered on Jun 21, 2019 | 39 views

Hello Brian,
There is no reboot button on this unit. To reboot the receiver, simply unplug AC power for 30 minutes, then while plugging back in press and hold the power button for 5-10 seconds at the same time to reset.
Check all the speaker wiring for shorts, make sure they're also not touching the chassis of the receiver, or are not otherwise pinched or frayed. If all looks well, try disconnecting all the speakers and cycle the power off, then on again.
Try connecting the speakers one at a time until one of them shuts the Audio down. Check this speaker with a multi-meter and make sure it is reading between 4-8 ohms.
If not, the speaker may be blown and is causing the receiver to short out and therefore power the audio down.
If you still cannot get any audio through the system, then it likely has bad output transistors, or capacitor and is in need of service.
Here is a link to the Operating Manual Good Luck, JP

Kenwood Car... | Answered on Jun 16, 2019 | 30 views

Hello Francesco, I sent you the link to the service manual of your Kenwood XD-500, so that you follow the steps to get to the CD changer
I hope the information is usefull
Greetings Franco Dosil

Hola Francesco, te env?o el link del manual de servicio de tu Kenwood XD-500, para que sigas los pasos para llegar al cambiador de CD
espero te sirva la informacion
Saludos Franco Dosil

Kenwood Car... | Answered on Jun 15, 2019 | 70 views

dealer with vin or vehicle and proof of ownership

Kenwood Car... | Answered on Jun 13, 2019 | 34 views

Your Kenwood senses battery replacement as battery theft and forces you to re-enter the appropriate code to get back in operation.

Kenwood Car... | Answered on Jun 06, 2019 | 43 views

Actually serial number you can find on gadget body or on gadget papers.

Kenwood Car... | Answered on Jun 03, 2019 | 32 views

Not finding what you are looking for?
Kenwood KDC-C719 10-Disc CD Changer Logo

Popular Tags

6 questions posted

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5013 Answers


Level 3 Expert

85160 Answers

Mike Duncan
Mike Duncan

Level 2 Expert

219 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides