20 Most Recent Jensen VM9510 Car DVD Player - Page 3 Questions & Answers


i had the same problem. It is illegal to watch videos while driving hence why they dont tell you how to play youtube off of card and usb. But after hours of testing converted videos here what works for me. download pazera free flv to avi converter. after that you will have to custom convert the videos with these settings....video format is MPG custom MPEG-2/ FPS 29.97. Audio mp3-mpeg- layer 3/ bit rate 128 and i added stereo-2 for kicks. last but not least custom resolution (Based on size of screen) 720x480. (for 3.5 inches. you can adjust for size. convert and it works :)

Jensen VM9510... | Answered on Oct 05, 2013


all youneed todo is take ur pink wire from headunit and connect it with the ground wire and there ugo

Jensen VM9510... | Answered on Sep 18, 2013


I need the manual of panasonic car color tv tuner model TBM850425

Jensen VM9510... | Answered on Jul 31, 2013


Don't pay for it....Just read it:


The code is a permanent way of disabling the brake override on the jensen units.


There are two ways of doing this:

Insert the DVD

After the disc loads and plays you will see a blue screen telling you "it is unlawful to drive with a movie blah blah blah"

1)Activate the brake sequence and disable the blue screen using the hand brake, the switch method or anything else to give the unit its three pulses to disable that freakin blue screen.

(What I did was I installed my radio entirely, then took the pink wire and touched for two seconds, removed for two seconds and then touched and held the negative pole of a mower battery laying on my passenger seat until the screen was no longer blue.)


2) Next, on the main remote press stop twice, then 1, 2, 6, 4.

You will now see a hidden menu that says:

Region Code
Brake Override (I know you're drooling by now)
Macrovision (Watch all the burned and pirated movies you want if this option is off)
Loader Version
Model Version


3) Using the right joystick on the unit, navigate to the options of your choice, click on them to toggle on, off or which region code you want.

This is what you want:

Region Code: 1
Brake Override ON
Macrovision: OFF

When your done, click SYS SETUP on the main remote TWICE to save the settings and bingo, your done!!! Hooray!!! You can now kill your whole family in the car while watching that adult movie while your driving.....


The other way of doing this is by not engaging the parking brake sequence, thus you're inputting the code blindly.

1) Insert the DVD and you'll get the blue screen.

(If you have more than one tv, the unit itself will have the blue screen but the additional tv's you have plugged in will NOT, they will show the dvd menu. Thus you will be able to see the hidden menu on the additional screens after inputting the code, but not on the main unit because of its blue screen.)

2) On the main remote, push stop twice and then 1, 2, 6, 4

3) Push the joystick on the unit SOUTH twice and then click it once.

4) Press SYS SETUP on the main remote twice to save your settings.


It may take a few tries but you'll get it. This method can be done if you don't want to bother temporarily activating the brake sequence, but if you only have the unit and no additional tv's, its #$%^&* damn hardbecause you can't see the settings your changing.


I tried to make this as clear as possible. If you have questions, private message me or post here.

This code DOES work.

Best of Luck!


By the way, this is for informational purposes only and I will not be responsible for anything bad/stupid/ignorant you do with your Jensen unit.


(Sorry Jack Sap, but this stuff should be free...)

Jensen VM9510... | Answered on Apr 30, 2013


im not resposible for anything here but try this. stick another disc in only about half way or as far as it will go up to that point. when the loading mechanism in the player sees another disc trying to come in, it pops up to accept the disc. it should spit your stuck disc back at you while holding the new disc in your hand.

Jensen VM9510... | Answered on Feb 05, 2013


Well, I have 2 answers for you. 1st, your

Jensen VM9510... | Answered on Dec 11, 2012


You may download a copy of the manual here.

Jensen VM9510... | Answered on Nov 29, 2012


i have a dual xdvdn9131 new and i forget my password

Jensen VM9510... | Answered on Aug 26, 2012


You actually have to purchase the bluetooth module seperate, its just a box that clips to you're visor and has a microphone and a connect button on it. It has one cable which is ran to the back of your stereo. The one made for the uv10 is called the btm10. However I have found that the btm15 works much better and has 2 microphones in it (one for calling and one for voice searching). You can find these on amazon and also jensen.com the price range runs from $40.00-$80.00......... Hope this helps you out...

Jensen VM9510... | Answered on Aug 23, 2012

Not finding what you are looking for?
Jensen VM9510 Car DVD Player Logo

596 questions posted

Ask a Question

Usually answered in minutes!

Top Jensen Car Audio & Video Experts

Larry Tezekjian
Larry Tezekjian

Level 2 Expert

117 Answers

xxxxxx xxx

Level 3 Expert

5013 Answers

The Knight
The Knight

Level 3 Expert

76143 Answers

Are you a Jensen Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Jensen Car Audio & Video

  • Jensen Car Audio & Video

Most Popular Question

awm975 only plays in black white

  • Car Audio & Video
Loading...