20 Most Recent Audiovox BA200 Car Subwoofer Questions & Answers


CALL OR EMAIL THIS COMPANY
WWW.AUDIODEZIGN.COM
401-848-0090

Audiovox BA200... | Answered on Jan 22, 2010


Any Auto Sound Store

Audiovox BA200... | Answered on Dec 28, 2009


Usually you can use any power cord just be sure it is the same size as the other one you had.

Audiovox BA200... | Answered on Nov 06, 2009


try radioshack, walmart, or try ebay

Audiovox BA200... | Answered on Nov 19, 2008


(There are different versions of the ba-200, so I'm assuming they al use the same wiring/pinout...) if you look at the amp on the enclosure(right-side up... so the writin goes left->right): The top left pin is #1, beside it is #2, then #3. The bottom left pin is #4, beside it is #5, then #6. #1 Right speaker positive input #2 Empty #3 12 Volt Constant Power #4 Left speaker positive input #5 Remote turn on / Acc power input #6 Ground Now there's supposed to be a 15-amp fuse on pin #3 (12v constan power).

Audiovox BA200... | Answered on Jan 18, 2008


Unfortunately, it's not as simple as a crossover. Bose gets its name from making complete systems - meaning - Bose speakers work right because the amplifier is custom built for those speakers, and the deck is custom built for the amplifier- all Bose from beginning to end. The only way to bypass any part of a Bose system is to bypass the whole system, including amp, deck, subs, speakers, eq's, and start over from scratch, unless you are an electrical engineer and can meter components and evaluate them. Bose often has 1 or 1/2 ohm speakers which will not work with after market systems.  If you go to a Bose store, the only system that sounds good is the lifestyle system because it is Bose from beginning to end, just as an example. They are either cheaters or geniuses

Audiovox BA200... | Answered on Oct 17, 2007


There are 5 wires to connect to the BA-200 for proper operation. 1. Red Wire with Fuse: Connect this wire to a source of + 12 volts which does not turn off with the ignition key. It may also be connected directly to the po~itive (+) terminal of the battery. 2. Black Wire: Secure this wire using a screw or bolt on a grounded metal surface of the vehicle. Clean-away any rust, dirt, or paint from the surface to make sure a good connection is made. 3. Blue Wire: This wire activates the BA-200 when the stereo system is turned on. Connect it to the "Power .Antenna" lead from your car stereo. If your car stereo does not have or you cannot locate the Power Antenna lead, the blue wire can be connected to a source of + 12 volts which is turned on and off with the ignition switch. In this case, the BA-200 will be activated whenever the ignition switch is turned on, whether the car stereo is on or off. 4. Green Wire: Splice this wire to the wire going to the positive (+) terminal (sometimes indicated bya red dot) of the left speaker of your stereo system. 5. G ray Wire: Splice this wire to the wire going to the positive ( + ) terminal (sometimes indicated bya red dot) of the right speaker of your stereo system. You Need to order this piece trough the manufacturer, with out this piece the sub is useless, i am guessing around $20-$30 for it

Audiovox BA200... | Answered on Jul 27, 2007

Not finding what you are looking for?
Audiovox BA200 Car Subwoofer Logo

Popular Tags

21 questions posted

Ask a Question

Usually answered in minutes!

Top Audiovox Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

5013 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Marvin
Marvin

Level 3 Expert

85178 Answers

Are you an Audiovox Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Audiovox Car Audio & Video

  • Audiovox Car Audio & Video

Most Popular Question

audiobahn atb8at

  • Car Audio & Video
Loading...