20 Most Recent NetGear WGT624 Wireless Router Questions & Answers


Double-click on the LAN icon on the bottom right by your clock and go to the IP that is shown for your default gateway. That will take you to your router, than just manually reset everything.

Chris

NetGear WGT624... | Answered on Dec 29, 2018


Plug an ethernet cable into the wan port of the router from your virgin modem... then plug ethernet cable from computer into a port on the router....that should solve your problem.

NetGear WGT624... | Answered on Oct 18, 2018


Hi,

In Netgear routers if the tick light is on that mean there are some issues in the router. Normal by resetting the router to factory default can be solve these issues. Please follow the steps below to reset the router.

1. Locate the reset hole at the back of the router.
2. Press the reset button with the help of pen or a pointed object for 15 seconds.
3. Take out the power cable without releasing the reset button.
4. Plug the power back cable without releasing the reset button.
5. Hold the button for 15 more seconds and then release it.
6. Take out the power and plug it back and check the status.

Regards,

Rashsih Sharma

NetGear WGT624... | Answered on Oct 18, 2018


To secure your NetGear Router follow the instructions at the link below:
.../Netgear/WGT624/wireless.htm.. <<

NetGear WGT624... | Answered on Aug 20, 2018


You may need to upgrade your Router Firmware. Try going to the Netgear site http://kb.netgear.com/app/products/family/a_id/1297 and select your exact model. Version number is located on the sticker under the Router. Under the downloads section of your model, is a Firmware download. Download the latest version for installation. BE SURE that you connect your computer and router with a Network cable when upgrading the Firmware. DO NOT upgrade firmware over Wireless connection of you could fry the device. To login into the router console click http://192.168.0.1 and enter admin as the username, and password as the password. You will see an upgrade firmware section, point to the new Firmware file you have downloaded and follow the on screen prompts. You will need to setup your SSID and Encryption Password after the upgrade. Netgear Support will walk you through this these steps if you are uncomfortable performing them. Support numbers are here: http://kb.netgear.com/app/answers/detail/a_id/984

NetGear WGT624... | Answered on Dec 07, 2017


The simplest step may be to right-click on the Wi-fi icon in one of your computers' system tray (bottom right corner of the screen). Click on "Troubleshoot problems". The troubleshooter program will try to identify and fix any of several possible causes. Wait patiently while it searches ....
If the Windows troubleshooter fails to resolve the issue, you can try power-cycling the chain of components by following these steps:
1. Unplug the power cord from the Modem.
2. Unplug the power cord from the Router.
3. Shutdown the computer(s) that need wi-fi.
4. Wait twenty seconds, then plug in the power cord for the Modem. Then wait at least one full minute for the Modem to boot up and settle down.
5. Next, plug in the power cord for the Router. Wait at least thirty seconds for it to fully boot up and settle down.
6. Power on one computer that needs wi-fi. Wait for it to fully boot up and settle down. Check if you have a connection to the Router.

NetGear WGT624... | Answered on Nov 27, 2017


As you say that, you are able to go online with the modem, connect your modem- router and laptop witha cable and check if you are able to go online with the router wired first, if yes, then the w/ls settings has to be checked..open your w/ls network connection, remove your preferred wireless network and then try to reconnect again and check.. if you are not able to gon online wired with the router, disconnect power cables from modem- router , wait for 10 sec, and reconnect it , wait till all the lights come up and then reconnect, check if you are able to go online if not your router has to be reconfigured,,

plz check and revert back in case of any issues

NetGear WGT624... | Answered on Oct 04, 2017


Was this in a sealed box and did you get instructions?

Out of the box, a Netgear router is fairly easy to set up. If you don't have a manual, here's a link to the quick setup guide.
ftp://downloads.netgear.com/files/WGT624v4_SM_30Apr07.pdf

Note on pdf page 20 that if you've somehow screwed it up, you can take a paper clip and reset the box to default. Then follow the manual setup instructions from the beginning of the document.

Carl


NetGear WGT624... | Answered on Jan 10, 2017


NetGear WGT624... | Answered on Mar 09, 2015


http://www.fixya.com/support/t25407722-router_reset_now_no_password_only

NetGear WGT624... | Answered on Feb 09, 2015


Look at the bottom of the router.

You will find a sticker there with login details. Select quick start.

NetGear WGT624... | Answered on Feb 09, 2015


If u dont know ur router login password then reset it but keep in mind it would reset to default.
And if u lost ur wep or wpa2psk password then just login from a computer or directly via web to ur router 192.168.0.1

NetGear WGT624... | Answered on Aug 11, 2014


If you did not change your password from the default it should be a username of admin and password of password. If you have changed the password and need to change your settings you can reset your password to default by doing a factory reset: To reset unplug the power from the router and hold in the reset button (on the back) for about 5 seconds while while powering on.

NetGear WGT624... | Answered on May 12, 2014


Page 40 of the manual below.

NetGear WGT624... | Answered on Apr 23, 2014

Not finding what you are looking for?
NetGear WGT624 Wireless Router Logo

485 questions posted

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

NetGear Computers & Internet

  • NetGear Computers & Internet

Most Popular Question

multiple wireless laptops wifi enabled

  • Computers & Internet
Loading...